Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

三(明)钢烧结厂电除尘灰的气力输送

三钢烧结厂130m^2烧结机电除尘输灰首次采用了气力输送系统。该系统由气源、输送、管路、灰库及控制五部分组成，本文介绍了系统的工作原理及运行调试情况。系统投产后，运行平稳，达到了设计要求。     

Integration of batching and scheduling for hot rolling production in the steel industry

This paper investigates the hot rolling production scheduling problem in the steel industry and proposes a new mixed integer programming model for this problem based on the monolithic modeling strategy that integrates batching and scheduling. Using this strategy, the new model can simultaneously schedule multiple turns and simultaneously determine the production timetable of these turns in a global optimal view. A long-term tabu search heuristic using frequency-based memory is developed to obtain near-optimal solutions for this problem. Three kinds of speed-up strategies are developed to accelerate the search procedure of the proposed tabu search. A practical scheduling system combining the proposed mathematical model and the tabu search heuristic has been developed and tested on instances collected from practical production data. The experimental results show that the proposed mathematical model and the tabu search heuristic outperform both the current manual scheduling method and the traditional serial method.     

固体超强酸S_2O_8~(2-)/SnO_2-SiO_2催化合成环己酮1,2-丙二醇缩酮

采用沉淀-浸渍法制备了固体超强酸S2O28-/SnO2-SiO2,以它为催化剂催化环己酮和1,2-丙二醇合成了环己酮1,2-丙二醇缩酮;考察了带水剂种类及用量、酮醇摩尔比、催化剂用量、反应时间对产品收率的影响,并用正交实验对反应条件进行了优化。实验结果表明,适宜的反应条件为:n(环己酮)∶n(1,2-丙二醇)=1∶1.6、催化剂用量为反应物料总质量的2.0%、带水剂环己烷用量5.0mL、反应时间50min。在此条件下,环己酮1,2-丙二醇缩酮收率达到91.47%;催化剂的稳定性良好,在重复使用5次后环己酮1,2-丙二醇缩酮收率为82.20%,活性下降的主要原因为催化剂表面积碳和吸附了有机物;经傅里叶变换红外光谱和气相色谱质谱分析表明,产物为环己酮1,2-丙二醇缩酮,纯度为100%。     

空调风机的特点及合理选型

介绍了空调风机的特点，并通过实例说明了风机合理的选型过程。     

Ultrasonic thin-walled tube wave structure for sensing devices

Theoretical and experimental investigations of thin-walled tube acoustic wave devices for gravimetric sensing applications are presented. Integrated sensor configurations have been demonstrated by employing a sol-gel processed thin piezoelectric lead zirconate titanate (PZT) film. This was coated coaxially on stainless steel tubes and interdigital transducers (IDT) fabricated as the transmitter and receiver on the curved tube surfaces. We have observed tube waves along both the axial and circumferential directions between 1 and 6.6 MHz. We have also analyzed the mass sensitivities of different modes propagating along the tubes and shown that high mass sensitivity can be achieved by keeping the tube wall thin     

Stabilization of wave equations coupled in parallel by viscous damping

In this article, we consider stabilization of two wave equations coupled in parallel by viscous damping. Uniform exponential stabilization can be achieved when damping is presented in two equations. In general only strong stabilization can be achieved when damping is present in one equation, while uniform exponential stabilization is still possible for some special cases.     

Stability of Mixtoxantrone Hydrochloride in Solution

A stability-indicating reversed-phase high performance liquid chromatographic method was developed for the detection of mitoxantrone HC1 and its degradation products under accelerated degradation conditions. The degradation kinetics of mitoxantrone HC1 in aqueous solution over a pH range of 1.18 to 7.20 and its stability in propylene glycol-or polyethylene glycol 400-based solutions were investigated. The observed rate constants were shown to follow apparent first-order kinetics in all cases. The pH-rate profile shows that maximum stability of mitoxantrone HC1 was obtained at pH 4.01. No general acid or base catalysis from acetate or phosphate buffer species was observed. The catalysis rate constants on the protonated mitoxantrone imposed by hydrogen ion water and hydroxy ion were determined to be 3.72 × 10 min^-1 5.64 × 10-min^-1 and 1.108 × 10^-2min^-1, respectively. The degradation rate constants of mitoxantrone affected by different ionic strength systems. Irradiation with 254 nm UV light at 25±0.5°C was found when canpared with the light-protected controls. Incorporation of nonaqueous propylene glycol or polyethylene glycol in the pH 4.01 mitoxantrone solution shows an increase in its stability at 502±0.5°C.