TiAl＋Sb合金的热稳定性的研究

研究了退火处理对Ｔｉ－３４ｗｔ．％Ａｌ－０．５ｗｔ．％Ｓｂ合金的室温抗弯性能，显微组织，相组成和断口形貌的影响。发现，低于１０００℃退火处理，ＴｉＡｌ＋Ｓｂ合金的显微组织没有变化，其力学性能仍然保持较高的值。此合金成分适应高温使用条件。     

微电量测量中信号的拾取和放大

本文介绍了静电计级运算放大器在工业微电量测量中的应用,并且给出了实际的电路结构和相关的噪声解决办法。     

中国水稻害虫发生与防治研究进展

本文介绍了我国水稻害虫发生的种类，主要稻虫的种群消长，对水稻危害的损失，在各个不同年代，通过研究和防治，总结出对抗虫品种评价与利用的研究发展迅速，新农药的试验开发效果明显。７０年代以来，按我国稻区生态条件和稻虫为害的特点，形成了江淮、太湖平原、川西平原、洞庭湖平原和珠江三角洲五大稻区的水稻病虫综合防治技术体系，主要技术路线是以农业防治为基础，抗性品种为主体，依靠经济防治指标，协调农药防治和利用天敌     

A greedy algorithm to determine the number of transporters in a cyclic electroplating process

This paper presents a local optimization algorithm for minimizing the number of transporters required for material handling in a cyclic processing line. Within a cycle, a given set of transportation operations must be performed. Each operation consists of picking up a work-in-process job at a stage and delivering it to the next stage. The length of time that a job can remain at a particular stage is restricted by a time window. The transporters that perform the operations move on a shared track, and traffic collisions must be avoided during their movements. To avoid traffic collisions, the operations are partitioned into groups, where each group is served by a single transporter. A local optimal solution is obtained when the group sizes are maximized. We show that the duals of the linear programming subproblems formulated in the process of maximizing the group sizes are specially structured shortest-path problems. This leads to an effective search method for the maximization problem. Conditions when die proposed algorithm achieves die global optimal solution are discussed. The algorithm's performance is evaluated on both randomly generated test problems and benchmark problems.     

固定电子分立元器件用胶粘剂E—4X的研制

介绍了一种不同于灌封材料，具有触变性，粘接性能优良，使用方便的固定电子分立元器件用胶粘剂Ｅ－４Ｘ。与国外同类产品Ｅｐ－４３３ｘ胶粘剂对比，其综合性能优于Ｅｐ－４３３胶粘剂。     

CT9800机器操作使用经验介绍

本文重点介绍了在进行CT断层X-线摄影时,如何灵活应用标准、软组织和骨结构等三种重建图像的软件,既能显著缩短图像重建的时间,又不会遗漏病变的影像。     

Low-temperature growth of silicon-boron layer as solid diffusionsource for polysilicon contacted p+-n shallow junction

A new material, Si-B, is proposed as a solid diffusion source for fabrication of poly-Si contacted p⁺-n shallow junctions. The junction depth of the Si-B source diode has been measured and compared with that of a BF₂⁺-implanted poly-Si source diode. It was found that the Si-B source diode had a much shallower junction and was less sensitive to thermal budget than the BF₂⁺ source diode. This was attributed to the smaller surface concentration and diffusivity of boron in the silicon in Si-B source diodes. Regarding electrical characteristics of diodes with a junction depth over 500 Å, a forward ideality factor of better than 1.01 over 8 decades and a reverse-current density lower than 0.5 nA/cm² at -5 V were obtained. As the junction depth shrank to 300 Å, the ideality factor and reverse current density of diodes increased slightly to 1.05 and 1.16 nA/cm², respectively. These results demonstrated that a uniform ultrashallow p⁺-n junction can be obtained by using a thin Si-B layer as a diffusion source     

Nd：碲酸盐玻璃的光谱和激光性质

对比了各种激光玻璃的光谱性质，指出碲酸盐玻璃是一咱理想的激光介质，并资产在室温下实现了钛宝石激光器泵浦了Ｎｄ：碲酸盐块体玻璃的激光发射，激光阈值４．２０ｍＪ，斜率效率１４．７％。     

基于RD算法的星载SAR斜视成像

本文研究了用距离一多普勒（ＲＤ）算法来实现星载 ＳＡＲ的斜视成像处理。给出了星载 ＳＡＲ斜视时的空间几何模型和回波信号模型，详细分析了地球自转和斜视产生的多普勒质心所引起的距离走动差异，及时域和频域校正对成像的影响，并研究了一种改进的ＲＤ算法进行距离走动的校正，此算法能适应大的斜视距离走动和地球自转距离走动。针对不同的距离走动校正进行了计算机仿真，理论分析和仿真结果表明：这种改进的ＲＤ算法是有效的。     

宽带相干源波达方向估计的新方法

相干信号子空间处理方法（ＣＳＭ）是一种通过构造聚焦（ｆｏｃｕｓｉｎｇ）矩阵来估计宽带相干源波达方向（ＤＯＡ）的有效方法。本文基于一致聚焦的概念，给出了一种可用于任意阵列的完全聚焦方法，从而极大地改善了ＤＯＡ的估计分辨率、估计精度等性能，大大降低了估计方法的信噪比阈值。文中在最后通过计算机仿真，与ＣＳＭ方法进行了比较，验证了本方法的优良性能。