光子晶体光纤飞秒激光技术研究进展

光子晶体光纤自诞生至今的十几年来得到了快速发展,不同结构和各具特色的光子晶体光纤层出不穷。以应用于飞秒激光技术的各种光子晶体光纤为主线,介绍了目前基于光子晶体光纤飞秒激光技术的实验研究进展,尤其是高功率、高能量飞秒激光系统的研究现状和发展方向。     

Linear Study of a Large-orbit Coaxial-waveguide Cyclotron Autoresonance Maser Amplifier

A linear theory based on Maxwell-Vlasov equations and the Laplace transform is presented to describe the large-orbit coaxial-waveguide cyclotron autoresonance maser (CARM) amplifier. A 35-GHz, TE_5,1-mode large-orbit coaxial-waveguide CARM amplifier is specifically analyzed. Good agreement between the linear theory and the nonlinear simulations is found in the exponentially growing region of the wave. Results show that the operating magnetic field and the electron-beam energy and average radius substantially affect the power, and especially, a small beam current may be unsuitable to a large-orbit CARM amplifier operation.     

带闪蒸器补气的R134a准二级压缩制冷/热泵系统实验研究

为增加空气源热泵运行的稳定性及提高其性能系数,本文提出了以R134a为工质的涡旋压缩机闪蒸器补气制冷/热泵系统。搭建了实验台对压缩机排气温度、功耗、制冷量、制热量及制冷、制热性能系数进行研究。结果表明:当冷凝温度为45℃,蒸发温度为-20~0℃时,与采用相同工质的单级系统相比,补气系统的排气温度降低了6.2℃,功耗增加1.4%~2.8%,制冷量和制冷COPc分别提高19.8%和17.6%,制热量和制热COPh分别提高15.3%和13.2%。     

麦秸秆加筋盐渍土的尺寸效应与制样问题处置

制备均匀且整体性较好的试样是保证室内实验结果可靠的前提条件。提出了两端压实的静力制样法,围绕制样中出现的几个问题,制定了适宜的应对措施。同时完成了不同直径的盐渍土和麦秸秆加筋土试样的抗压强度实验,分析了试样抗压强度的尺寸效应,以及试样直径与加筋条件间的比例关系。结果显示:采用两端压实的静力制样方法制备加筋土试样是可行的;两种试样均存在明显的尺寸效应;由于麦秸秆的加筋作用,使得麦秸秆加筋土不同尺寸试样的抗压强度尺寸效应大于盐渍土的,且其抗压强度的尺寸效应随试样尺寸的增大而越来越明显;适宜加筋长度为0.316倍试样直径,适宜加筋率0.25%。研究结果可为制备合格的加筋土试样提供参考,也有益于在未来的研究中选择更合理的麦秸秆加筋条件。     

Mapping QTLs Controlling Beneficial Fatty Acids Based on the Embryo and Maternal Plant Genomes in Brassica napus L.

This study was mainly carried out to detect the quantitative trait loci (QTLs) located simultaneously in embryo and maternal plant nuclear genomes for beneficial fatty acid contents of rapeseed under different environments by using a mapping model and mapping populations from a cross of ‘Tapidor’ × ‘Ningyou7.’ Eight, three, six, seven and three QTLs respectively for palmitic, oleic, linoleic, linolenic and eicosenoic acid contents were identified and subsequently mapped on chromosomes A1, A3, A4, A6, A8, A9, C1, C3, C5, C7, C8 and C9. Among them, 12 QTLs were major ones that could respectively explain more than 10 % of phenotypic variation. Two specific genomic regions on A8 and C3 were associated with several QTLs relating to multiple fatty acid contents. Some of the markers such as HBr015 and JICB0633 showed tight linkage with the QTLs, which could be used for improving the fatty acid component(s) of rapeseed.     

Comparative study of porous anodic alumina: effects of aluminium deposition methods

This article reports on the comparative study of the fabrication of porous anodic alumina films by anodisation of the aluminium films on glass substrates which were deposited by direct current sputtering and electron beam evaporation methods. The relationship between surface morphology of the deposited aluminum films and porous anodic alumina films was investigated. A more uniform and ordered porous anodic alumina was obtained by fabricating from electron beam evaporation deposited aluminium film with smaller and compact grains. Two-step anodisation was used to further improve the quality of porous anodic alumina compared to one-step anodisation. The optical transmittance spectra within wavelength of 370–800 nm were obtained and the optical properties were studied.     

Human-tracking strategies for a six-legged rescue robot based on distance and view

Human tracking is an important issue for intelligent robotic control and can be used in many scenarios, such as robotic services and human-robot cooperation. Most of current human-tracking methods are targeted for mobile/tracked robots, but few of them can be used for legged robots. Two novel human-tracking strategies, view priority strategy and distance priority strategy, are proposed specially for legged robots, which enable them to track humans in various complex terrains. View priority strategy focuses on keeping humans in its view angle arrange with priority, while its counterpart, distance priority strategy, focuses on keeping human at a reasonable distance with priority. To evaluate these strategies, two indexes(average and minimum tracking capability) are defined. With the help of these indexes, the view priority strategy shows advantages compared with distance priority strategy. The optimization is done in terms of these indexes, which let the robot has maximum tracking capability. The simulation results show that the robot can track humans with different curves like square, circular, sine and screw paths. Two novel control strategies are proposed which specially concerning legged robot characteristics to solve human tracking problems more efficiently in rescue circumstances.     

Effect of Rotational Speed on Microstructure and Mechanical Properties of 2060 Aluminum Alloy RFSSW Joint

Metals and Materials International - Refill friction stir spot welding (RFSSW) is used to weld 3.2-mm-thick 2060 aluminum alloy sheets. In this study, we investigated the formation, microstructures...     

STUDY ON FRACTURE AND MOVEMENT OF OVERLYING BEDROCK IN SHALLOW SEAM UNDER THICK SAND

Based on the field observation results of ground pressure in shallow seam, the movement characteristics of overlying strata in front and behind and the subsidence of the earth‘s surface are studied. Also, the paper analyzes the stability of overlying bedrock according to the theory of voussoir beam‘s “S-R“ stability and the hypothesis of step subsidence. It points out that slide instability is the fundamental form of overlying bedrock movement.