Spray deposition process study of SnO2silicon solar cells using orthogonal experimental design

With the “orthogonal experimental design” (OED), the dependence of conductivity and transparency of tin oxide films and open circuit voltage V_oc of SIS solar cells on the spray deposition process factors was studied. The OED technique was found to be a powerful method for realizing the best factor combination. Using OED, curves were obtained which clearly depict the effects of each factor on the SIS characteristics. The results of the experiments also illustrate exactly which variation in fabrication technique most affects the sheet resistance, V_oc, and film transparency. Under the optimal combination of conditions, a thin film doped with NH₄F was obtained, with about 90% transmission and a sheet resistance of about 80 Ω/□, along with an SIS structure with a V_oc of about 0.61 V.     

P-V-T-C equation for epoxy molding compound

The isothermal and isobaric volume shrinkage is measured by a single-plunger-type dilatometer for epoxy molding compound (EMC). This device has been found suitable for measuring volume change of thermosetting materials such as commercial EMC under isothermal and isobaric conditions. Moreover, the degree of cure (conversion) was determined by a differential scanning calorimetry (DSC). Combining volume change and conversion, a mathematic pressure-volume-temperature-cure (P-V-T-C) model is proposed to describe the relationship between volume shrinkage, pressure, temperature and conversion. The P-V-T-C equation can be simply expressed as VS(P,T,C)=F/sub 1/(P,T)/spl middot/C/sup F2(P,T)/. This equation can well describe historical profiles of volume shrinkage under specified isothermal and isobaric states. From the predicted results, volume shrinkage under different pressure levels in any specified temperature can be approximated as and it obeys the principle of linearity. With the help of this model, together with three-dimensional mold filling simulation, engineers will be able to predict warpage and residual stresses for a package after molding.     

Projection methods in flexible multibody dynamics. Part I: Kinematics

In this paper a recursive projection method for the dynamic analysis of open-loop mechanical systems that consist of a set of interconnected deformable bodies is presented. The configuration of each body in the system is identified using a coupled set of reference and elastic co-ordinates. The absolute velocities and accelerations of leaf or child bodies in the open-loop system are expressed in terms of the absolute velocities and accelerations of the parent bodies and the time derivatives of the relative co-ordinates of the joints between the bodies. The dynamic differential equations of motion are developed for each link using the generalized Newton-Euler equations. The relationship between the actual joint reactions and the generalized forces combined with the kinematic relationships and the generalized Newton-Euler equations are used to develop a system of loosely coupled equations which has a sparse matrix structure. Using matrix partitioning and recursive projection techniques based on optimal block factorization an efficient solution for the system accelerations and joint reaction forces is obtained. This solution technique yields a much smaller operations count and can more effectively exploit vectorization and parallel processing. It also allows a systematic procedure for decoupling the joint and elastic accelerations.     

Stress relaxation in the interface between creep particle and elastic matrix-strengthening mechanism

The effect of a power law creep particle on interface behavior between the particle and elastic matrix is investigated by stress analysis. Using the results obtained through the stress analysis, the forces due to interaction of an applied stress and stress concentration with an edge dislocation are determined. The direct interaction between the edge dislocation and the creeping particle is studied under fully relaxed stress conditions. Through the investigation the following results are derived. Stress relaxation in the interface can be caused by power law creep along or by diffusion, or a combination of both mechanisms. The degree of stress relaxation caused by diffusion can be defined in terms of the relaxation time for both boundary diffusion and volume diffusion. The amount of stress relaxation caused by the power law creep particle is characterized by the quantity ₂ which is a function of Γ₀ = 2(1/√3)^{1 + m} × (σ_∞/2μ)^m(σ₀/σ_∞t^m), where m is strain rate hardening exponent, σ_∞ is applied stress, μ is the shear modulus, σ₀ is the material constant of the power law creep particle, and t is elapsed time. The value ₂ = 1.0 corresponds to the fully relaxed condition and ₂ = −0.6 corresponds to the initial state. The time to reach a fully relaxed condition is very sensitive to the strain rate exponent, with the smaller m values leading to longer times. The stress state of complete relaxation in the elastic matrix is equivalent to the solution of a void in an elastic matrix superposed on the solution of positive surface traction on the void. This result is identical to that obtained by Srolovitz et al. [Acta. Metall.32, 1979 (1984)]. When the stress is completely relaxed in the particle, all stress components (σ_r, σ_θand σ_rθ) are relaxed, while in the matrix relaxations are observed only for σ_rand σ_θ. The critical resolved shear stress and critical stress to climb the dislocation in the neighborhood of the particle exceed the Orowan stress. Also, the particle attracts the dislocation. Therefore the strengthening of a power law creep particle in an elastic matrix is caused by the Orowan mechanism and by attraction of the dislocation.     

Orderly stimulation of skeletal muscle motor units with tripolarnerve cuff electrode

An electrical nerve stimulation technique, using single tripolar electrode, was shown to be capable of recruiting motor units according to their size, while allowing simultaneous but independent control of firing rate in the active units. Test paradigms consisting of established fundamental physiological concepts of soleus-gastrocnemius architecture, motor units conduction velocity, firing rate behavior of motor units of different sizes, and their susceptibility to fatigue were employed to validate the technique and demonstrate its utility as a basic and applied research tool.     

High-performance simulations of turbulent boundary layer flow using Intel Xeon Phi many-core processors

The Journal of Supercomputing - Direct numerical simulations (DNS) of turbulent flows have increasing importance because they not only provide fundamental understanding of turbulent flows but also...     

Tertiary hash tree-based index structure for high dimensional multimedia data

Dominant features for the content-based image retrieval usually have high-dimensionality. So far, many researches have been done to index such values to support fast retrieval. Still, many existing indexing schemes are suffering from performance degradation due to the curse of dimensionality problem. As an alternative, heuristic algorithms have been proposed to calculate the answer with ??high probability?? at the cost of accuracy. In this paper, we propose a new hash tree-based indexing structure called tertiary hash tree for indexing high-dimensional feature data. Tertiary hash tree provides several advantages compared to the traditional extendible hash structure in terms of resource usage and search performance. Through extensive experiments, we show that our proposed index structure achieves outstanding performance.     

Advanced partial encryption using watermarking and scrambling in MP3

In this paper, we propose an advanced partial encryption of watermarking and scrambling using the magnitude information of Modifed Discrete Cosine Transform (MDCT). In MPEG-1/Audio Layer III (MP3), the magnitude and phase information of modified discrete cosine transform (MDCT) coefficients is encrypted. The proposed method uses both watermarking and scrambling, and aims at protecting the contents against eavesdropping and moreover against illegal mass distribution after descrambled. Experimental results show that the proposed method can achieve higher security and less computational complexity by reusing the MDCT coefficients obtained in MP3.     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Signal tracking method of GNSS receivers for spinning vehicles

A signal tracking method of GNSS receivers for spinning vehicles is proposed in order to eliminate the influence of spinning to the GNSS signal of a vehicle. In the proposed method, a rotation tracking loop is added into the carrier tracking loop of a conventional GNSS receiver. The proposed method was verified through computer simulations and an experiment for live GPS signals. The results show that the proposed method gives an accurate tracking performance.