Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Synthesis and electrical properties of poly[2-(2-(4-trifluoromethyl)phenyl)ethenyl-1,4-phenylenevinylene] and PPV copolymers

Summary Poly[2-(2-(4-(trifluoromethyl)phenyl)ethenyl)-5-methoxy-1,4-phenylenevinylene] (PFEMPV) and a series of PPV copolymers containing 1,4-phenylenevinylene (PV) units were synthesized through a water-soluble precursor route, and their electrical and third-order nonlinear optical properties were studied. The PFEMPV films could not be doped with I₂, but FeCl₃-doped films showed an electrical conductivity of 5.0x10^-4 S/cm. The conductivities of FeCl₃-doped copolymer films ranged from 2.0x10^-3 to 2.0 S/cm depending on their copolymer compositions. The third-order nonlinear optical susceptibility, ⁽³⁾(–;,,–), was also investigated by the degenerate four wave mixing technique at 602 nm. The ⁽³⁾ value of PFEMPV was 6.9x10^-11 esu. The photoluminescence spectrum of PFEMPV shows its emission maximum at 550 nm.     

Structure-property relationships in rubber-toughened epoxies

Epoxies toughened with two reactive liquid rubbers, an epoxy-terminated butadiene acrylonitrile rubber (ETBN) and an amino-terminated butadiene acrylonitrile rubber (ATBN), were prepared and studied in terms of their structure property relationships. A two-phase structure was formed, consisting of spherical rubber particles dispersed in an epoxy matrix. A broad distribution of rubber particles was observed in all the materials with most of the particles ranging in size from 1 to 4 μm, but some particles exceeding 20 μm were also found. Impact strength, plane strain fracture toughness (K_IC), and fracture energy (G_IC) were increased, while Young's modulus and yield strength decreased slightly with increasing rubber content and volume fraction of the dispersed phase. Both G_IC and K_IC were found to increase with increasing apparent molecular weight between crosslinks and decreasing yield strength. The increased size of the plastic zone at the crack tip associated with decreasing yield strength could be the cause of the increased toughness. An ATBN-toughened system containing the greatest amount of epoxy sub-inclusion in the rubbery phase demonstrated the best fracture toughness in this series. In the present systems, rubber-enhanced shear deformation of the matrix is considered to be the major toughening mechanism. Curing conditions and the miscibility between the liquid rubber and the epoxy resin determine the phase morphology of the resulting two-phase systems. Kerner's equation successfully describes the modulus dependence on volume fraction for the two-phase epoxy materials.     

Properties of chitosan‐based biopolymer films with various degrees of deacetylation and molecular weights

An increase in the depolymerization of chitosan was found with an increased concentration of sodium perborate. Acetic anhydride was added to reacetylated chitosan in a molar ratio per gulcosamine unit, and the amide I band of IR spectra changed with the addition of acetic anhydride. Sixteen chitosans with various molecular weights (MWs) and degrees of deacetylation (DODs) were prepared. X‐ray diffraction patterns indicated their amorphous and partially crystalline states. Increases in the chitosan MW and DOD increased the tensile strength (TS). TS of the chitosan films ranged from 22 to 61 MPa. However, the elongation (E) of chitosan films did not show any difference with MW. TS of chitosan films decreased with the reacetylation process. However, E of chitosan films was not dependent on DOD. The water vapor permeabilities (WVPs) of the chitosan films without a plasticizer were between 0.155 and 0.214 ng m/m² s Pa. As the chitosan MW increased, the chitosan film WVP increased, but the values were not significantly different. Moreover, the WVP values were not different from low DOD to high DOD. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3476–3484, 2003     

Modeling nonisothermal impregnation of fibrous media with reactive polymer resin

The manufacture of polymer composites through resin transfer molding (RTM) or structural reaction injection molding (SRIM) involves the impregnation of a fibrous reinforcement in a mold cavity with a reactive polymer resin. The design of RTM and SRIM operations requires an understanding of the various parameters, such as materials properties, mold geometry, and mold filling conditions, that affect the resin impregnation process. Modeling provides a potential tool for analyzing the relationships among the important parameters. The present work provides the physical model and finite element formulations for simulating the mold filling stage. Resin flow through the fibers is modeled using two-dimensional Darcian flow. Simultaneous resin reaction and heat transfer among resin, mold walls, and fibers are considered in the model. The proposed technique emphasizes the use of the least squares finite element method to solve the convection dominated mass and energy equations for the resin. Excellent numerical stability of the proposed technique provides a powerful numerical method for the modeling of polymer processing systems characterized by convection dominated transport equations. Results from example numerical studies for SRIM of polyurethane/glass fiber composites were presented to illustrate the application of the proposed model and numerical scheme.     

Calcium binding mode of {gamma}-carboxyglutamic acids in conantokins

Conantokin-T (con-T) and conantokin-G (con-G) are two highlyhomologous peptide toxins found in Conus venom. The former isa 21-residue peptide with four -carboxyglutamic acid (Gla) residues(at positions 3, 4, 10 and 14), while the latter is a 17-residuepeptide with five -carboxyglutamic acid residues (at positions3, 4, 7, 10 and 14). Despite the apparent similarity in numberand relative positions of the -carboxyglutamic acid residues,¹¹³Cd-NMR studies indicated a distinct metal binding behaviorfor con-G and con-T. There appears to be four binding sitesin con-G in contrast to one metal binding site in con-T. Toelucidate the mode of calcium binding by the -carboxyglutamicacid residues in these conantokins, we designed various analogouspeptides with their -carboxyglutamic acid replaced by otheramino acid residues. ¹¹³Cd-NMR experiments on conantokin analoguesreveal that the major difference in the number of metal bindingsites between con-G and con-T is due to the residue at position7. We also performed molecular simulations to calculate therelative binding free energies of several potential bindingsites. Based on our theoretical and experimental results, wepropose a `four-site' binding model for conantokin-G and a `single-site'binding model for conantokin-T.     

Study on the thermoplastic vulcanizate using ultrasonically treated rubber powder

Nowadays, waste EPDM (ethylene propylene diene monomer) increasingly has been causing significant environmental problems with increasing numbers of vehicles. From the perspective of the environment and economics, recycling is the best method to treat waste materials. This study investigated waste EPDM/PP (polypropylene) blends with waste EPDM. Waste EPDM powders were treated ultrasonically, which physically modifies the rubber particles to confer good mechanical properties. Also investigated were the relevance of the mass percentage of the dispersed phase, the influence of the geometry and rotation speeds of the screw used in extrusion, and the melting temperature of PP materials on the morphology and mechanical properties of the blend. The purpose of this study was to develop a valuable thermoplastic elastomer from waste EPDM. This study concentrated on determining the optimum conditions for producing a blend by extrusion, including parameters of screw geometry, screw rotational speed, and operating temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2503–2507, 2003     

Fabrication of a gradient refractive index preform using laminar shear mixing

A gradient refractive index rod was successfully prepared by a new fabrication method using laminar shear mixing, and a graded index polymer optical fiber that satisfied IEEE1394b was obtained from the method. To fabricate the gradient refractive index rod, a liquid monomer mixture with a relatively low refractive index was placed in a prepared cylindrical glass reactor and a transparent polymer rod with a higher refractive index was introduced at the center of the reactor. The reactor and the polymer rod were then rotated concurrently with a small rotating speed difference to generate a Couette flow in the liquid phase. The centrifugal force generated by rotation and the polymer diffusion into the liquid monomer mixture developed a graded concentration profile in a radial direction. The Couette flow could reduce the concentration fluctuation in a tangential direction. In addition, the graded index profile could be controlled by the copolymer composition of the rod and its diameter. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1100–1104, 2005     

Surface diffusion in microporous media

The surface diffusion of He, Ne, H₂, Ar, O₂, N₂ and CO₂ through Vycor microporous glass was analyzed theoretically and experimentally in the low pressure range as a function of temperature. A statistical-mechanical treatment was carried out in terms of partition functions to derive a general equation of surface flow. It was possible to separate the surface diffusion from the total flow using a simplified working equation. The conventional method which assumes that there is no adsorbed flow for helium should be discarded, because the fraction of surface diffusion for helium ranges from 0.133 to 0.247. It is also illustrated how to predict the permeability of a new gas for the same porous medium.     

Energetic surface heterogeneity of nanocrystalline TiO<Subscript>2</Subscript> films for dye-sensitized solar cells

Dye sensitized solar cells (DSSCs) have been receiving significant attention because they have many advantages compared to conventional organic solar cells. It has been known that the photovoltaic characteristics of DSSC are highly dependent on the adsorption properties of dyes on TiO₂ films. To analyze the surface heterogeneity of TiO₂ surfaces, single-phase anatase nanocrystallite titanium films were prepared by sol-gel method using the hydrolysis reaction of titanium tetraisopropoxide under acidic condition and characterized by XRD, FE-SEM and BET analysis. The adsorption energy distribution functions were calculated by the generalized nonlinear regularization method. It was found that the shape and the intensity of the adsorption energy distribution curve determined were highly related with the physical properties (i.e., geometrical heterogeneity) and chemical characteristics (i.e., energetic heterogeneity) of nanocrystalline TiO₂ for DSSC.