航空发动机变结构全局快速Terminal滑动模态控制方法研究

针对航空发动机这个具有时变不确定性的非线性系统,提出了一种新型变结构全局快速最终滑动模态控制(Variable Structure Global Fast Terminal Sliding Mode Control)的航空发动机控制方法;通过对利用VSGFTSMC理论设计航空发动机最终滑动模态控制器的方法进行了深入研究,设计了航空发动机变结构全局快速滑动模态控制器;仿真结果表明,所设计的控制器的控制效果良好,对外界干扰有很强的抑制能力,使被控系统在整个控制阶段都具有较强的鲁棒性.     

基于SoC的嵌入式DRAM存储器内建自测试设计

内建自测试(Built-in Self Test,BIST)是测试片上系统(System on- Chip,SoC)中嵌入式存储器的重要技术;但是,利用BIST技术采用多种算法对嵌入式存储器进行测试仍面临诸多挑战;对此,提出了一种基于SoC的可以带有多种测试算法的嵌入式DRAM存储器BIST设计,所设计的测试电路可以复用状态机的状态,利用循环移位寄存器(Cyclic Shift Register,CSR)产生操作命令,利用地址产生电路产生所需地址;通过对3种BIST电路支持的算法,全速测试,面积开销3个方面的比较,表明提出的嵌入式DRAM存储器BIST设计在测试时间,测试故障覆盖率和测试面积开销等各方面都取得了较好的性能.     

机载塔康设备综合检查仪设计

使用市场上成熟的模块和技术研制机载塔康设备综合检查仪,以降低成本和提高设备的可靠性;根据设备的测试需求,选用嵌入式工业平板电脑、USB-ARINC429通讯卡、USB-数字IO卡、串行接口数字表和自研的塔康信号模拟器等构成检查仪硬件,使用CVI9.0编写了测试程序;应用表明:检查仪集成度高,使用方便,能够完成对塔康设备的自动及手动测试。     

Extreme learning machine for regression and multiclass classification

Due to the simplicity of their implementations, least square support vector machine (LS-SVM) and proximal support vector machine (PSVM) have been widely used in binary classification applications. The conventional LS-SVM and PSVM cannot be used in regression and multiclass classification applications directly, although variants of LS-SVM and PSVM have been proposed to handle such cases. This paper shows that both LS-SVM and PSVM can be simplified further and a unified learning framework of LS-SVM, PSVM, and other regularization algorithms referred to extreme learning machine (ELM) can be built. ELM works for the "generalized" single-hidden-layer feedforward networks (SLFNs), but the hidden layer (or called feature mapping) in ELM need not be tuned. Such SLFNs include but are not limited to SVM, polynomial network, and the conventional feedforward neural networks. This paper shows the following: 1) ELM provides a unified learning platform with a widespread type of feature mappings and can be applied in regression and multiclass classification applications directly; 2) from the optimization method point of view, ELM has milder optimization constraints compared to LS-SVM and PSVM; 3) in theory, compared to ELM, LS-SVM and PSVM achieve suboptimal solutions and require higher computational complexity; and 4) in theory, ELM can approximate any target continuous function and classify any disjoint regions. As verified by the simulation results, ELM tends to have better scalability and achieve similar (for regression and binary class cases) or much better (for multiclass cases) generalization performance at much faster learning speed (up to thousands times) than traditional SVM and LS-SVM.     

Feature extraction using orthogonal discriminant local tangent space alignment

A novel algorithm called orthogonal discriminant local tangent space alignment (O-DLTSA) is proposed for supervised feature extraction. Derived from local tangent space alignment (LTSA), O-DLTSA not only inherits the advantages of LTSA which uses local tangent space as a representation of the local geometry so as to preserve the local structure, but also makes full use of class information and orthogonal subspace to improve discriminant power. The experimental results of applying O-DLTSA to standard face databases demonstrate the effectiveness of the proposed method.     

顶底板围岩不稳的缓倾斜中厚以上矿体的采矿新方案

密集平行束孔落矿的底盘漏斗采矿方案的特点是:用密集严行束孔落矿;凿岩与出矿水平合二为一;实行“掘井、劈漏、落矿三位一体”的回采工艺。该方案结构简单、采切比低、工人劳动强度低,适于开采缓倾斜顶底围岩不稳固的中厚以上矿体。     

《自动控制原理》课程中闭环脉冲传递函数算法研究

针对一般方法推导离散系统闭环脉冲传递函数过程繁琐费时的问题,给出一种先连续化求出闭环传递函数再离散化求解的简便方法,并给出使用本方法的单一化条件。对于满足该条件的系统,可直接求用简便方法求取系统的闭环脉冲传递函数,不满足该使用条件的系统,对其中间变量的求取可使用本方法,因而大大简化求解闭环脉冲传递函数的过程,为采样控制系统的分析和设计提供了很大的方便。     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

冲压件CAPP系统中几何信息提取实现

基于对AutoCAD的DXF文件格式的详细分析，充分利用多义线的表达简洁性优点，并结合冲压件自身特点，提出了冲压件几何信息获取的方法及程序框架，详细说明了几何信息库的创建方法，并进一步采用Delphi6．0语言编程，实现了冲压几何信息库的建立和几何信息自动提取。     

Study on structure-property relationship of polyimide blends

Summary Three pairs of polyimide/polyimide blends (50/50 wt%) with different molecular structures were prepared by two ways, i.e. mixing of the polyamic acid precursors with subsequent imidization, and direct solution mixing of the polyimides. The blends were studied with DMA technique. The results obtained show that all the blends prepared with these two different ways are miscible, as there existed only one glass transition temperature (Tg) for all the blends. It is suggested that the miscibility of these polyimide/polyimide blends is a result of the strong inter-molecular charge-transfer interaction between the chains of their components.