Oxidized cellulose: An application in the form of sorption filter materials

Oxidized cellulose (oxycellulose) was very effectively used in the form of filter sheets to remove some metal ions from water and from aqueous solutions. Furthermore, oxycellulose was applied in an ion‐exchange column and in a batch process. The mechanisms of the sorption process inside oxycellulose as well as the kinetics of sorption were studied. A comparison of oxycellulose and other adsorption components such as zeolites and ion‐exchange resins was made. The affinity of oxycellulose to metal ions was determined to be in the following order: Cd²⁺, Zn²⁺ > Ni²⁺ ? Ca²⁺ > Mg²⁺ ? Na⁺. The use of oxycellulose was very effective, especially in the form of sorption filters, because this allowed us to use a simple filtration process. Moreover, the specific loading amount of the filter cake was higher for filtration than for the column process under comparable conditions. Oxycellulose in a glass column behaved similarly to an ion‐exchange resin. It showed approximately constant efficiency until the sorption capacity of the adsorbent was exhausted, and then it suddenly dropped. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Analysis of switched networks

Ideal switches are rarely modelled in network analysis because inconsistent conditions can occur at the instant of switching. This causes standard integration routines to fail. If the initial conditions can be determined, the use of ideal switches can considerably speed up analysis and can make the results easier to understand. This paper, partly a review, presents a method which can handle ideal switching, inconsistent initial conditions, Dirac impulses and signals with discontinuities. It is applicable to networks containing linear or non-linear elements.     

Relationship between chemical and rheological properties of two asphalts of different origins

The chemical and rheological properties of two asphalts selected from different sources (Urals, Russia; Cold Lake, Canada) were investigated. Analyses of chemical (elemental composition, fractional composition, molecular weights) and physical properties (complex viscosity, loss tangent, shear compliance) were performed on all original and aged (rolling thin film oven test, RTFOT; pressurized aging vessel, PAV) samples. The analyses of the chemical properties of both asphalts revealed higher asphaltene content, higher heteroatom content, and lower aging susceptibility of the Cold Lake asphalt (less significant changes in group composition). Based on its chemical composition, the Cold Lake asphalt was expected to perform better in the rheological tests than the Urals asphalt. The rheological tests confirmed this hypothesis and revealed better low- and high-temperature properties of the Cold Lake asphalt and a slower deterioration of its physical properties upon oxidative aging.     

Elimination of irreversible effects during first charging of lithium battery anodes

The irreversible capacity of negative electrode in a lithium-ion cell is a widely described the phenomenon. Irreversible capacity losses are connected with formation of a solid electrolyte interface layer. This layer is growing on the electrode-electrolyte interface during first several charging cycles. The layer is indispensable for proper functioning of a lithium-ion cell. However, during this layer formation, the atoms of lithium are consumed in a range from 18 to 45% of the total amount of lithium atoms presented in cell. Demonstration of possibilities to suppress this phenomenon that occurs on a negative electrode interface is the main aim of this paper.     

Ordinary Gasoline Emissions Induce a Toxic Response in Bronchial Cells Grown at Air-Liquid Interface

Gasoline engine emissions have been classified as possibly carcinogenic to humans and represent a significant health risk. In this study, we used MucilAir™, a three-dimensional (3D) model of the human airway, and BEAS-2B, cells originating from the human bronchial epithelium, grown at the air-liquid interface to assess the toxicity of ordinary gasoline exhaust produced by a direct injection spark ignition engine. The transepithelial electrical resistance (TEER), production of mucin, and lactate dehydrogenase (LDH) and adenylate kinase (AK) activities were analyzed after one day and five days of exposure. The induction of double-stranded DNA breaks was measured by the detection of histone H2AX phosphorylation. Next-generation sequencing was used to analyze the modulation of expression of the relevant 370 genes. The exposure to gasoline emissions affected the integrity, as well as LDH and AK leakage in the 3D model, particularly after longer exposure periods. Mucin production was mostly decreased with the exception of longer BEAS-2B treatment, for which a significant increase was detected. DNA damage was detected after five days of exposure in the 3D model, but not in BEAS-2B cells. The expression of CYP1A1 and GSTA3 was modulated in MucilAir™ tissues after 5 days of treatment. In BEAS-2B cells, the expression of 39 mRNAs was affected after short exposure, most of them were upregulated. The five days of exposure modulated the expression of 11 genes in this cell line. In conclusion, the ordinary gasoline emissions induced a toxic response in MucilAir™. In BEAS-2B cells, the biological response was less pronounced, mostly limited to gene expression changes.     

Chemistry and Toxicology of Major Bioactive Substances in Inocybe Mushrooms

Mushroom poisoning has always been a threat to human health. There are a large number of reports about ingestion of poisonous mushrooms every year around the world. It attracts the attention of researchers, especially in the aspects of toxin composition, toxic mechanism and toxin application in poisonous mushroom. Inocybe is a large genus of mushrooms and contains toxic substances including muscarine, psilocybin, psilocin, aeruginascin, lectins and baeocystin. In order to prevent and remedy mushroom poisoning, it is significant to clarify the toxic effects and mechanisms of these bioactive substances. In this review article, we summarize the chemistry, most known toxic effects and mechanisms of major toxic substances in Inocybe mushrooms, especially muscarine, psilocybin and psilocin. Their available toxicity data (different species, different administration routes) published formerly are also summarized. In addition, the treatment and medical application of these toxic substances in Inocybe mushrooms are also discussed. We hope that this review will help understanding of the chemistry and toxicology of Inocybe mushrooms as well as the potential clinical application of its bioactive substances to benefit human beings.     

Ultrathin hydroxyapatite coating on pure magnesium substrate prepared by pulsed electron ablation technique

Magnesium (Mg) as a potential material for biodegradable implants is attractive due to its mechanical similarity to the bone tissue and nontoxic corrosion products. However, the rapid corrosion rate of bare magnesium is associated with hydrogen release, which may complicate the healing process. The corrosion rate may be reduced by suitable alloying, but concurrently the biocompatibility of such alloy might be deteriorated. Another way of reduction of the corrosion rate is coating. Hydroxyapatite (HA)-based coating is considered to improve biocompatibility as well as decrease the corrosion rate by the barrier effect. In this study, ultrathin (150 nm) HA and HA containing Sr coatings are deposited via pulsed electron ablation technique on pure Mg. The microstructure of the coating was assessed by scanning electron microscopy. Electrochemical methods were used to investigate the corrosion properties of prepared coatings. The materials covered by this layer were characterized by superior corrosion behavior, with corrosion rates of coated samples up to five times lower as compared with the uncoated ones. Such coating is the thinnest coating found in the literature sources.     

Editorial

This editorial provides an overview of a special issue dedicated to the 7th conference on Process Integration, Modeling and Optimization for Energy Saving and Pollution Reduction—PRES 2004. Eight papers have been selected and peer-reviewed covering various subjects of heat transfer engineering, focusing on the recent development of various features of heat transfer equipment design and optimization. This is the fourth special issue of Heat Transfer Engineering dedicated to selected contributions from PRES conferences [1 Kleme?, J. and Stehlík, P. Heat Transfer Engineering. PRES Conference—Challenges in Complex Process Heat Transfer. vol. 23, pp.1–2. no. 6 [Google Scholar], 2 Stehlík, P. and Kleme?, J. Heat Transfer Engineering. Selected Papers from the PRES 2002 Conference. vol. 25, pp.1–3. no. 5 [Google Scholar], 3 Kleme?, J. and Stehlík, P. Heat Transfer Engineering. Selected Papers from the PRES 2003 Conference. vol. 26, pp.1–3. no. 5 [Google Scholar]].