Hydrogen desorption from alloys Mg–Cu(–KCl): Cu catalysis in detail

Effect of chemical composition of Mg-xCu based alloys (x = 9.94–58.00 wt %) modified by KCl upon their hydrogen storage performance was studied. Kinetic curves and pressure-concentration isotherms were measured in the ranges up to 60 bar and 388 °C, respectively. It was observed that desorption rate dc/dt is not significantly influenced by the composition. Unknown Cu-rich phase was detected that has shown a catalytic effect on desorption from a mixture with other phases. Activation energy of hydrogen desorption decreased with increasing x from 180 kJ/mol down to 98 kJ/mol. Average hydride dissociation enthalpy, ΔH, for the lowest plateau was 75 kJ/mol which is equal to literature value for pure Mg. Slightly lover average value, 67 kJ/mol was obtained for the second plateau and ΔH for the third one decreased from 70 kJ/mol for the lowest to 49 kJ/mol for the highest x.     

Surface functionalization of mesoporous antimony doped tin oxide by metalorganic reaction

Electrically conducting mesoporous antimony doped tin oxide was functionalized by the metalorganic reaction with several Grignard reagents. This fast and efficient grafting approach enables a direct connection of the metal atoms with the organic functionalities avoiding the formation of insulating Si–O linkers, which is of special interest for the interfacial charge transfer processes. Using this approach we introduced vinyl, allyl and phenyl groups into the pores of mesoporous ATO, which was confirmed by IR spectroscopy, TGA and nitrogen sorption measurements. We obtained a high loading of organic groups corresponding to about 50–60% of the monolayer surface coverage. The obtained mesoporous inorganic–organic hybrids can serve as a platform for incorporation of electrochemically active species.     

3GPP LTE‐Assisted Wi‐Fi‐Direct: Trial Implementation of Live D2D Technology

This paper is a first‐hand summary on our comprehensive live trial of cellular‐assisted device‐to‐device (D2D) communications currently being ratified by the standards community for next‐generation mobile broadband networks. In our test implementation, we employ a full‐featured 3GPP LTE network deployment and augment it with all necessary support to provide real‐time D2D connectivity over emerging Wi‐Fi‐Direct (WFD) technology. As a result, our LTE‐assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real‐world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE‐assisted WFD solutions and associated operational ranges.     

Assessing urban stormwater toxicity: methodology evolution from point observations to longitudinal profiling.

The quality of aquatic habitat in a stormwater management facility located in Toronto, Ontario, was assessed by examining ecotoxicological responses of benthic invertebrates exposed to sediment and water from this system. Besides residential stormwater, the facility receives highway runoff contaminated with trace metals, polycyclic aromatic hydrocarbons (PAHs), and road salt. The combined flow passes through two extended detention ponds (in series) and a vegetated outlet channel. Toxicity of surficial sediment collected from 14 longitudinally arrayed locations was assessed based on 10 acute and chronic endpoints from laboratory tests with four benthic organisms. Greatest overall toxicity was observed in sediment from sites in the upstream pond, where mortality to amphipods and mayflies reached up to 100%. Downstream pond sediment was less toxic on average than the upstream pond sediment, but not the outlet channel sediment where untreated stormwater discharges provided additional sources of contamination. Macroinvertebrate communities in sediment cores were depauperate and dominated by oligochaetes and chironomids, with minimum densities and diversity at the deeper central pond sites. While sediment toxicity was associated with high concentrations of trace metals and high-molecular weight PAHs, benthic community impoverishment appeared related to high water column salinity.     

A cold model analysis of solid waste incineration

A cold physical model to a scale of 1:33 of a solid waste incinerator was designed and constructed of transparent material. Experimentation aimed at optimizing gas flow patterns in the furnace for low-pollutant combustion. Flames were simulated by acid-base neutralization. Secondary air flow distribution and direction were identified as the controlling parameters of the flow pattern. The best possible air distribution for a desired flame shape and gas mixing was determined. Streamline plots for verification of the mathematical models were obtained.     

Application of random-search algorithm for regression analysis of catalytic hydrogenations

A short review of the works concerning parameter estimation in kinetic experiments was performed. An adaptive random search algorithm was applied to evaluate the parameters and parameter confidence intervals of Langmuir-Hinshelwood models. The kinetic parameters were determined using the Box - Draper criterion. The parameter confidence regions were found by using the likelihood ratio. Three heterogeneously catalyzed hydrogenations were studied.     

Indene epoxidation over immobilized methyltrioxorhenium on MCM-41 silica,fumed silica and aluminosilicate materials

The presented report focuses on the testing of heterogenized methyltrioxorhenium (MTO) in indene epoxidation. A range of mesoporous materials with different SiO₂/Al₂O₃ ratios, namely aluminosilicates type Siral and MCM-41 silica and fumed silica, were used as supports for immobilization of MTO. The tested support materials and prepared catalytic systems exhibited high surface area, well-defined regular structure and narrow pore size distribution of mesopores and therefore represent good quality catalysts for various reactions. The immobilized MTO on various supports was tested for the preparation of 1,2-epoxyindane using two forms of hydrogen peroxide as oxidation agents, namely aqueous solution of hydrogen peroxide and its anhydrous form, urea-hydrogen peroxide. The prepared catalysts were successfully used for the preparation of 1,2-epoxyindane with achieved 100 % selectivities to the desired product at high conversions of indene.     

A Novel Nanoprobe for Multimodal Imaging Is Effectively Incorporated into Human Melanoma Metastatic Cell Lines

To facilitate efficient drug delivery to tumor tissue, several nanomaterials have been designed, with combined diagnostic and therapeutic properties. In this work, we carried out fundamental in vitro and in vivo experiments to assess the labeling efficacy of our novel theranostic nanoprobe, consisting of glycogen conjugated with a red fluorescent probe and gadolinium. Microscopy and resazurin viability assays were used to study cell labeling and cell viability in human metastatic melanoma cell lines. Fluorescence lifetime correlation spectroscopy (FLCS) was done to investigate nanoprobe stability. Magnetic resonance imaging (MRI) was performed to study T₁ relaxivity in vitro, and contrast enhancement in a subcutaneous in vivo tumor model. Efficient cell labeling was demonstrated, while cell viability, cell migration, and cell growth was not affected. FLCS showed that the nanoprobe did not degrade in blood plasma. MRI demonstrated that down to 750 cells/μL of labeled cells in agar phantoms could be detected. In vivo MRI showed that contrast enhancement in tumors was comparable between Omniscan contrast agent and the nanoprobe. In conclusion, we demonstrate for the first time that a non-toxic glycogen-based nanoprobe may effectively visualize tumor cells and tissue, and, in future experiments, we will investigate its therapeutic potential by conjugating therapeutic compounds to the nanoprobe.     

Bestimmung des Grenzumformgrades mit dem Torsionsversuch

Die Bestimmung des Grenzumformgrades eines Stahles, der während der plastischen Verformung nicht überschritten werden kann, ist von großer Bedeutung. Die vorliegende Arbeit berichtet über Ergebnisse von Warmtorsionsversuchen, aus denen der Grenzumformgrad als Funktion von Temperatur und Umformgeschwindigkeit ermittelt wurde. Die Versuche wurden an den Stählen X 10 CrNiTi 18 9, 10 CrMo 9 10, X 10 CrNiMoTi 18 12, X 20 CrMoV 12 1 und X 2 NiCrNb 25 18 durchgeführt.