Gamma radiation aging of EVA/EPDM blends: Effect of vinyl acetate (VA) content and radiation dose on the alteration in mechanical,thermal, and morphological behavior

A series of ethylene vinyl acetate (EVA)/ethylene‐propylene diene elastomer (EPDM) blends (50/50 ratio) with four types of EVAs were prepared using brabender type batch mixer followed by compression molding. All compression‐molded samples were exposed to gamma radiation at 500, 1000, and 1500 kGy doses and were subjected to mechanical, compression set, thermal and morphological test. The % retention in tensile strength, elongation, and hardness were found higher for higher vinyl acetate (VA) containing radiation aged EVA/EPDM blends. The compression set value was decreased with increase of VA content. The thermal degradation kinetics of high VA containing irradiated blend (EVA40/EPDM) (EVA40 is 40%VA containing EVA) was found slower than those of lower VA containing blend (EVA18/EPDM). The surface morphology for EVA18/EPDM sample was transformed into more irregular one with more cracks and fragmented segments by aging at 1500 kGy dose while surface for EVA40/EPDM sample was found comparatively smooth, fine, and continuous with very few cracks and fragmented parts at similar dose. Thus, from the measured properties and morphology, it was revealed that the degree of degradation of blends kept on decreasing with increase in VA content. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46216.     

Compact inductive energy storage pulse power system

An inductive energy storage pulse power system is being developed in BARC, India. Simple, compact, and robust opening switches, capable of generating hundreds of kV, are key elements in the development of inductive energy storage pulsed power sources. It employs an inductive energy storage and opening switch power conditioning techniques with high energy density capacitors as the primary energy store. The energy stored in the capacitor bank is transferred to an air cored storage inductor in 5.5 μs through wire fuses. By optimizing the exploding wire parameters, a compact, robust, high voltage pulse power system, capable of generating reproducibly 240 kV, is developed. This paper presents the full details of the system along with the experimental data.     

Modeling and performance analysis of VI‐CRA: A congestion control algorithm for vehicular networks

This study proposes a Vehicle ID‐based CAM Rate Adaptation (VI‐CRA) algorithm for beacon messages in the vehicular network. Foremost, an improved vehicle ID–based analytical model is proposed at the MAC layer of vehicular network. The model weighs the random back‐off number chosen by vehicles participating in the back‐off process, with the vehicle ID incorporated in their respective CAMs. This eventually leads to the selection of a vehicle ID–based random back‐off number, minimizing the probability of collision due to same back‐off number selection. It is worth noting that the improved analytical model outperforms the existing works in terms of average packet delay since only one fourth of the contention window size is used throughout the simulation. To enhance the performance of the analytical model, the paper incorporates a congestion control algorithm, by adapting the rate of CAM broadcast over the control channel. The algorithm is designed considering a wide range of scenarios, ranging from nonsaturated to extremely saturated network (in terms of collision probability) and sparsely distributed to teemed network (in terms of vehicular density). For better analyses of simulation results, the algorithm is applied over different vehicle ID–based back‐off numbers. Simulation results for all the back‐off numbers show that vehicle ID–based CAM rate adaptation algorithm performs better than the traditional fixed CAM rate IEEE 802.11p, even at high vehicular density.     

Three‐dimensional electrospun micropatterned cellulose acetate nanofiber surfaces with tunable wettability

Three‐dimensional polymer nanofibrous mats with tunable wettability have been fabricated using a single step non‐conductive template assisted electrospinning process. Cellulose acetate nanofibers are electrospun over a nylon mesh, which acts as the template. The as‐deposited fiber mat is removed from this template to produce a free standing three‐dimensional micropatterned nanofibrous mat. By simply varying the template mesh dimensions, the fraction of the air‐liquid interface can be changed which allows control of the wetting mechanics. It is shown that the water contact angle can be varied from about 30° for a planar network to about 140° for a patterned mat implying a complete transition from hydrophilic to hydrophobic behavior. Furthermore, upon stretching the fiber mat loses its pattern irreversibly and reducing the contact angle from 140° to 110° with increasing stretching. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44709.     

ENGAGE compatibilized HDPE/EPDM blends: Modification of some industrially pertinent properties and morphology upon incorporation of Mg(OH)2 filler and electron beam crosslinked network

To observe the effect of ENGAGE (a poly‐olefin elastomer) on compatibilization of industrially important incompatible blend, high‐density polyethylene (HDPE)/ethylene‐propylene diene elastomer (EPDM), 15 wt % ENGAGE is incorporated into the system and the latter is found satisfactorily efficient as compatibilizer for the above system. To improve some industrially pertinent properties another strategies are also followed in addition, incorporation of magnesium hydroxide [Mg(OH)₂] and electron beam (EB) crosslinking into the system. The gel content was found to increase with radiation dose, EPDM content and Mg(OH)₂ dispersion. ENGAGE interestingly increases the gel content that is, promotes crosslinking. It is unique that filler dispersion and crosslinked network formation maintain the compatibility of the ternary system, which is confirmed by X‐ray diffraction, differential scanning calorimetry, mechanical properties, and scanning electron microscope. The compatibilization, Mg(OH)₂ dispersion, and EB crosslinking improve the mechanical, thermo mechanical, flame retardant properties, and phase morphology considerably. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44922.     

Pinched tube flow reactor: Hydrodynamics and suitability for exothermic multiphase reactions

A novel tubular flow reactor where a straight tube is modified by pinching it periodically at a fixed pitch and at different angles is presented. Pinched tubes (straight tube as well as helical coils) with different pitch and angles between successive pinching are studied. This work reports a detailed hydrodynamic study involving single and two‐phase flow. Mixing experiments showed that having an angle of 90° between successive pinchs achieves the shortest mixing length when compared to lower angles. Pressure recovery along with sequence of high and low shear zones and change of flow direction imposed better mixing. Residence time distribution studies showed that higher number of pinch sections decreases the extent of dispersion, yet it deviates from plug flow. The performance is evaluated by carrying a homogeneous and two‐phase aromatic nitration and also liquid‐liquid extraction. Pinched tube presents an economical option as a flow reactor for conducting exothermic reactions. © 2016 American Institute of Chemical Engineers AIChE J, 63: 358–365, 2017     

Arc characterization study for submerged arc welding of HSLA (API X80) steel

Journal of Mechanical Science and Technology - The load bearing capacity of weld is highly influenced by the mode of metal transfer which in turn is dependent on welding current and arc voltage....     

Structural and Electrical Properties of Ag/<Emphasis Type="Italic">n</Emphasis>-TiO<Subscript>2</Subscript>/<Emphasis Type="Italic">p</Emphasis>-Si/Al Heterostructure Fabricated by Pulsed Laser Deposition Technique

We have investigated the structural and electrical characteristics of the Ag/n-TiO₂/p-Si/Al heterostructure. Thin films of pure TiO₂ were deposited on p-type silicon (100) by optimized pulsed laser ablation with a KrF-excimer laser in an oxygen-controlled environment. X-ray diffraction analysis showed the formation of crystalline TiO₂ film having a tetragonal texture with a strong (210) plane as the preferred direction. High purity aluminium and silver metals were deposited to obtain ohmic contacts on p-Si and n-TiO₂, respectively. The current–voltage (I–V) characteristics of the fabricated heterostructure were studied by using thermionic emission diffusion mechanism over the temperature range of 80–300 K. Parameters such as barrier height and ideality factor were derived from the measured I–V data of the heterostructure. The detailed analysis of I–V measurements revealed good rectifying behavior in the inhomogeneous Ag/n-TiO₂/p-Si(100)/Al heterostructure. The variations of barrier height and ideality factor with temperature and the non-linearity of the activation energy plot confirmed that barrier heights at the interface follow Gaussian distributions. The value of Richardson’s constant was found to be 6.73 × 10⁵ Am^?2 K^?2, which is of the order of the theoretical value 3.2 × 10⁵ Am^?2 K^?2. The capacitance–voltage (C–V) measurements of the heterostructure were investigated as a function of temperature. The frequency dependence (Mott–Schottky plot) of the C–V characteristics was also studied. These measurements indicate the occurrence of a built-in barrier and impurity concentration in TiO₂ film. The optical studies were also performed using a UV–Vis spectrophotometer. The optical band gap energy of TiO₂ films was found to be 3.60 eV.     

Performance analysis of SiGe double-gate N-MOSFET

The major purpose of this paper is to find an alternative configuration that not only minimizes the limitations of single-gate (SG) MOSFETs but also provides the better replacement for future technology. In this paper, the electrical characteristics of SiGe double-gate N-MOSFET are demonstrated and compared with electrical characteristics of Si double-gate N-MOSFET. Furthermore, in this paper the electrical characteristics of Si double-gate N-MOSFET are demonstrated and compared with electrical characteristics of Si single-gate N-MOSFET. The simulations are carried out for the device at different operational voltages using Cogenda Visual TCAD tool. Moreover, we have designed its structure and studied both I_d-V_g characteristics for different voltages namely 0.05, 0.1, 0.5, 0.8, 1 and 1.5 V and I_d-V_d characteristics for different voltages namely 0.1, 0.5, 1 and 1.5 V at work functions 4.5, 4.6 and 4.8 eV for this structure. The performance parameters investigated in this paper are threshold voltage, DIBL, subthreshold slope, GIDL, volume inversion and MMCR.