一种基于DBF的双基地雷达系统的性能分析与实验研究

讨论了一种基于数字波束形成的脉冲追赶式双基地雷达系统的构成和基本工作原理．对该双基地雷达的性能进行了理论分析，并通过实验结果进行了验证。     

Designing circuits with partial scan

In this scan design methodology, only selected faults are targeted for detection. These faults are those not detected by the designer's functional vectors. The test generator decides exactly which flip-flops should be scanned using one of two methods. In the first method, all possible tests are generated for each target fault, and the set of tests requiring the fewest flip-flops is selected. In the second method, only one test is generated for each fault, and the use of flip-flops is avoided as much as possible during test generation. Examples of actual VLSI circuits show a savings of at least a 40% in full-scan overhead     

Location management of correlated mobile users in the UMTS

In this paper, we propose concurrently searching for correlated mobile users in mobile communications networks. Previous work either focuses on locating a single mobile user or assumes that the locations of mobile users are statistically independent. We first propose a mobility model in which the movements of mobile users are statistically correlated. Next, we use the theory of Markov chain to derive the joint probability density function of the locations of mobile users. In addition, we propose a novel approach to discover the correlations among the locations of mobile users without explicitly calculating the joint probability density function. Our simulation results indicate that exploring the correlations among the locations of mobile users could significantly reduce the average paging delay and increase the maximum stable throughput.     

Computerised trace method for establishing equations for dimensions and tolerances in design and manufacture

A computerised trace method has been developed for determining the relationships of assembly requirements with design dimensions and tolerances of the components in an assembly, and the relationships of design specifications and machining allowance requirements with manufactured dimensions and tolerances of the component in a process plan. This method traces from the proposed components or planned operations only the dimensions and tolerances that affect the given requirement, and therefore the equations for design or for manufacture can be established simultaneously and accurately. Hence it is possible to establish constraints for the optimisation of dimensions and tolerances for design or for manufacture.     

与商业比肩而行

“许多美术行为都是与商业客户相结合的。以商业的视角看待作品更重视在整个概念部分是不是能够从设计的观点很忠实地传达出商业诉求，并引起更大共鸣”。[编者按]     

广州市西村水厂生物预处理试验研究

介绍广州市西村水厂生物预处理试验研究,探讨用生物预处理工艺处理西村水厂现有原水的效果。试验结果表明生物预处理对改善西村水厂现有水源水质效果显著,"生物预处理 常规处理"后的最终出水的考察项目全部符合《生活饮用水卫生标准》。指出实施生物预处理工艺与西江引水工程相衔接,完全可以保障西村水厂的供水水质。     

Measurement of three-phase transformer derating and reactive power demand under nonlinear loading conditions

The measurement of real and apparent power derating of three-phase transformers is important for transformers feeding nonlinear loads. This paper presents a new digital data-acquisition method for measuring derating and reactive power demand of three-phase transformers under full or partial load conditions. The accuracy requirements of the instruments employed (potential, current transformers, shunts, voltage dividers, optocouplers volt- and current meters) are addressed. Application examples demonstrate the usefulness of this new digital data-acquisition method.     

基于VHDL实现单精度浮点数的加／减法运算

研究了单精度浮点数加／减法的结构及其设计方法，并在Aldec公司的Active—HDL软件环境下，采用VHDL语言进行设计，并进行了仿真验证，计算精度可以达到10^-7。     

Study on the long‐term thermal‐oxidative aging behavior of polyamide 6

The long‐term thermal‐oxidative aging behavior of polyamide 6 (PA6) was studied by comparison with the stabilized sample in this work. The variation of mechanical properties of the pure and the stabilized samples of PA6 with aging time at 110°C, 130°C, and 150°C were investigated, respectively. The aging mechanism of PA6 under heat and oxygen was studied in terms of the reduced viscosity, crystallization behavior, dynamic mechanical behavior, and chemical composition through the methods of polarized light microscopy (PLM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), X‐ray photoelectron energy spectrum (XPS), and so on. The results indicated that at the initial stage of aging, the molecular crosslinking reaction of PA6 dominated resulting in the increase of the mechanical strength, reduced viscosity, and the glass transition temperature of the sample. And the molecular degradation dominated in the subsequent aging process resulting in the decrease of the melting temperature, the increase of the crystallinity, and the formation of the oxides and peroxides products. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and aqueous solution behaviors of sodium sulfonate‐terminated dendritic poly(ester‐amine)

Sodium sulfonate‐terminated dendritic poly(ester‐amine) (SPEA) was synthesized by sulfonation of acrylic double bond‐terminated dendritic poly(ester‐amine) (APEA) with sodium hydrogen sulfite (NaHSO₃) in mixture of diglycol and 2‐butanone under normal pressure. The structure of SPEA was characterized by IR, ¹H‐NMR, and elemental analysis. SPEA was water‐soluble. 1.0–40.0% (mass) SPEA aqueous solutions appeared as dilatant fluid. When pH value varied from 1.5 to 12.0, the viscosity of 1–5% (mass) SPEA aqueous solutions changed very small, and the electric conductivity almost kept stable within pH 3.0–10.0. The relationship between the viscosity and the concentration of SPEA water solutions was similar to that of NaCl water solutions. The surface tension of SPEA water solutions was lower than that of polyethylene glycol 2000 water solutions with the same concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008