Proteomic analysis of sera of asymptomatic,early‐stage patients with Wilson's disease

Wilson's disease (WD) is characterized by excessive accumulation of intracellular copper in liver and extrahepatic tissues, leading to significant oxidative stress and tissue damage. To date, several diagnostic biomarkers for WD such as serum ceruloplasmin, serum or urine copper levels and copper content in liver have been identified. However, these biomarkers may not be convincing for the diagnosis in some WD patients. To identify additional novel diagnostic biomarkers, we compared the serum protein profiles of asymptomatic childhood WD patients (n=20), without neurologic manifestation or liver cirrhosis, with normal controls (n=13). Fourteen spots, five up‐regulated and nine down‐regulated (>2‐fold), were differentially expressed in WD patients in comparison to normal control on 2‐DE. Among them, three spots were down‐regulated in both male and female WD. MS/MS analysis revealed that the three spots were complement component C3, complement factor B and alpha‐2 macroglobulin. By comparative proteome analysis, complement component C3, complement factor B and alpha‐2 macroglobulin, which are related to oxidative stress and inflammation, turned out to be good candidates for novel diagnostic biomarkers for early stages of WD.     

NodeWiz: Fault-tolerant grid information service

Large scale grid computing systems may provide multitudinous services, from different providers, whose quality of service will vary. Moreover, services are deployed and undeployed in the grid with no central coordination. Thus, to find out the most suitable service to fulfill their needs, or to find the most suitable set of resources on which to deploy their services, grid users must resort to a Grid Information Service (GIS). This service allows users to submit rich queries that are normally composed of multiple attributes and range operations. The ability to efficiently execute complex searches in a scalable and reliable way is a key challenge for current GIS designs. Scalability issues are normally dealt with by using peer-to-peer technologies. However, the more reliable peer-to-peer approaches do not cater for rich queries in a natural way. On the other hand, approaches that can easily support these rich queries are less robust in the presence of failures. In this paper we present the design of NodeWiz, a GIS that allows multi-attribute range queries to be performed efficiently in a distributed manner, while maintaining load balance and resilience to failures.     

Stable microwave coaxial cavity plasma system at atmospheric pressure

We present a systematic study of the development of a novel atmospheric microwave plasma system for material processing in the pressure range up to 760 torr and the microwave input power up to 6 kW. Atmospheric microwave plasma was reliably produced and sustained by using a cylindrical resonator with the TM(011) cavity mode. The applicator and the microwave cavity, which is a cylindrical resonator, are carefully designed and optimized with the time dependent finite element Maxwell equation solver. The azimuthal apertures are placed at the maximum magnetic field positions between the cavity and the applicator to maximize the coupling efficiency into the microwave plasma at a resonant frequency of 2.45 GHz. The system consists of a magnetron power supply, a circulator, a directional coupler, a three-stub tuner, a dummy load, a coaxial cavity, and a central cavity. Design and construction of the resonant structures and diagnostics of atmospheric plasma using optical experiments are discussed in various ranges of pressure and microwave input power for different types of gases.     

Dynamic adhesive force measurements under vertical and horizontal motions of interacting rough surfaces

An instrument to measure dynamic adhesive forces between interacting rough surfaces has been developed. It consists of four parts, namely, main instrument body, vertical positioning system with both micrometer and nanometer positioning accuracies, horizontal positioning system with nanometer positioning accuracy, and custom-built high-resolution, and high dynamic bandwidth capacitive force transducer. The vertical piezoelectric actuator (PZT) controls the vertical (approaching and retracting) motion of the upper specimen, while the horizontal PZT controls the horizontal (reciprocal) motion of the lower specimen. The force transducer is placed in line with the upper specimen and vertical PZT, and directly measures the adhesive forces with a root-mean-square load resolution of 1.7 microN and a dynamic bandwidth of 1.7 kHz. The newly developed instrument enables reliable measurements of near-contact and contact adhesive forces for microscale devices under different dynamic conditions. Using the developed instrument, dynamic pull-in and pull-off force measurements were performed between an aluminum-titanium-carbide sphere and a 10 nm thick carbon film disk sample. Three different levels of contact force were investigated; where for each contact force level the vertical velocity of the upper sample was varied from 0.074 to 5.922 microms, while the lower sample was stationary. It was found that slower approaching and retracting velocities result in higher pull-in and pull-off forces. The noncontact attractive force was also measured during horizontal movement of the lower sample, and it was found that the periodic movements of the lower disk sample also affect the noncontact surface interactions.     

Electron beam lithography-assisted fabrication of Au nano-dot array as a substrate of a correlated AFM and confocal Raman spectroscopy

This paper documents a study of an Au nano-dot array that was fabricated by electron beam lithography on a glass wafer. The patterns that had features of 100nm dots in diameter with a 2-mum pitch comprised a total area of 200x200mum(2). The dot-shaped Cr underlayer was open to the air after developing Poly(methyl methacrylate) (PMMA). When dipped into the Cr etchant, the exposed Cr layer was eliminated from the glass wafer in a short period of time. In order to ultimately fabricate the Ti/Au dot arrays, Ti and Au were deposited onto the arrays with a thickness of 2 and 40nm, respectively. The lift-off procedure was carried out in the Cr etchant using sonication in order to completely remove the residual Cr/PMMA layer. The fabricated Au nano-dot array was then immersed in an Ag enhancing solution and then into an ethanol solution containing (N-(6-(Biotinamido)hexyl)-3'-(2'-pyridyldithio)-propionamide (Biotin-HPDP). The substrate was analyzed using a correlated atomic force microscopy (AFM) and confocal Raman spectroscopy. Through this procedure, position-dependent surface-enhanced Raman spectroscopy (SERS) signals could be obtained.     

Characterization of magnetic materials using a scanning microwave microprobe

We investigated the electromagnetic properties of metals of iron, nickel, cobalt, aluminum, gold, copper, silver, and permalloy thin films on SiO(2) substrates using a near-field microwave microprobe. The electromagnetic properties of metal sheets were estimated by measuring the microwave reflection coefficient S(11) and compared with the theoretical values. We observed the hysteresis behavior of permalloy thin films on SiO(2) substrates using a near-field scanning microwave microprobes (NSMM) system. Experimental results are in good agreement with the theoretical model of transmission theory. In order to better characterize the electromagnetic properties of metals and magnetic metals instead of the usual method, we take advantage of the noncontact microprobing evaluation capabilities using a near-field microwave.     

Preparation and characterization of nanoporous polyimide films from triblock copolyimides

Nanoporous polyimide films were prepared from triblock copolyimides. A thermally labile polymer, poly(propylene glycol), was incorporated into polyimides based on 4,4-(hexafluoroisopropylidene)diphthalic anhydride to obtain triblock copolyimides. Nanofoams were formed by thermolysis of the labile block. The thermal properties of the copolymers were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The nanopores were characterized by scanning electron microscopy (SEM).     

Fabrication of patterned single-walled carbon nanotube films using electrophoretic deposition

Thin films of chemically functionalized single-walled carbon nanotubes (SWNTs) were fabricated by using a direct current (dc) electrophoretic deposition method. SWNTs were shortened and then functionalized with acid chloride group to combine with the amine group-terminated gold substrate. Silica nanospheres with a diameter of about 190nm were arrayed on gold substrate to pattern a thin SWNT film. Periodically patterned SWNT film was eventually produced and would be used in potential applications like electron emitters and large surface area electrodes.     

MFM and gas adsorption isotherm analysis of proton beam irradiated multi-walled carbon nanotubes

To enhance the gas adsorption properties and modify the physical properties of carbon nanotubes, multi-walled carbon nanotubes (MWCNTs) were irradiated by high-energy proton beams, and the physical properties including morphology and local surface structure were investigated by using a transmission electron microscope (TEM), magnetic force microscope (MFM) and a gas adsorption isotherm apparatus which can deeply probe the fine structure of surface. Interestingly, clearer MFM images were obtained from the proton irradiated samples which supports that carbon exhibits magnetism under proton bombardments, although the intrinsic magnetic property is not understood. The layering properties of argon on MWCNTs were measured from 59 to 69 K and the interaction of argon on the surface was analyzed. The calculated values of isosteric heat of adsorption demonstrated that higher interaction of gas molecules with surface is found from the proton irradiated MWCNTs. This result strongly supports that the local surface modification, partial defects, for example, were created due to the external high energy impacts. Our results are worthy to note that gas adsorption technique can provide the fine atomic resolution which beyond the one of TEM and MFM.     

A novel fluorescence lifetime imaging system that optimizes photon efficiency

Fluorescence lifetime imaging (FLIM) is a powerful microscopy technique for providing contrast of biological and other systems by differences in molecular species or their environments. However, the cost of equipment and the complexity of data analysis have limited the application of FLIM. We present a mathematical model and physical implementation for a low cost digital frequency domain FLIM (DFD-FLIM) system, which can provide lifetime resolution with quality comparable to time-correlated single photon counting methods. Our implementation provides data natively in the form of phasors. On the basis of the mathematical model, we present an error analysis that shows the precise parameters for maximizing the quality of lifetime acquisition, as well as data to support this conclusion. The hardware and software of the proposed DFD-FLIM method simplifies the process of data acquisition for FLIM, presents a new interface for data display and interpretation, and optimizes the accuracy of lifetime determination.