Transmission electron microscopy study of extended defect evolution and amorphization in SiC under Si ion irradiation

The damage induced in 3C-SiC epilayers on a silicon wafer by 2.3-MeV Si ion irradiation for fluences of 10¹⁴, 10¹⁵, and 10¹⁶ cm⁻², was studied by conventional and high-resolution transmission electron microscopy (TEM/HRTEM). The evolution of extended defects and lattice disorder is followed in both the 3C-SiC film and Si substrate as a function of ion fluence, with reference to previous FTIR spectroscopy data. The likelihood of athermal unfaulting of native stacking faults by point defect migration to the native stacking faults is discussed in relation to damage recovery. Threshold energy densities and irradiation doses for dislocation loop formation and amorphous phase transformation are deduced from the damage depth profile by nuclear collisions. The role of electronic excitations on the damage recovery at high fluence is also addressed for both SiC and Si.     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.     

Extension-dominated improved dispersive mixing in single-screw extrusion. Part 2: Comparative analysis with twin-screw extruder

In Part 1 of this work, the possibility of improving single-screw extruders (SSE) better dispersive mixer was explored by harnessing extensional flows provided by the hyperbolic contracting–diverging channels of extensional mixing elements (EME). Addition of the EME to the pin screw generated enhanced breakup for polymer blends and nanocomposite systems without significant penalty in flow rate. In Part 2, experiments are performed on immiscible polymer blends (low-viscosity ratio and high-viscosity ratio) and nanocomposites on both SSE and twin-screw extruder (TSE) with the same rotation speed and throughput. Morphological results show tremendous improvement in dispersive mixing capability of SSE when equipped with EME that are mainly comparable to conventional TSE that is, with kneading blocks as mixing sections, although not as good as TSEs equipped with EMEs. Mechanical results also show enhanced modulus when EME is used in SSE operations.     

Micro-end-milling of single-crystal silicon

Ductile-regime machining of silicon using micro-end-mill is almost impossible because of the brittle properties of silicon, crystal orientation effects, edge radius of the cutter and the hardness of tool materials. Micro-end-milling can potentially be used to create desired three dimensional (3D) free form surface features using the ductile machining technology for single-crystal silicon. There is still a lack of fundamental understanding of micro-end-milling of single-crystal silicon using diamond-coated tool, specifically basic understanding of material removal mechanism, cutting forces and machined surface integrity in micro-scale machining of silicon. In this paper, further research to understand the chip formation mechanism was conducted. An analysis was performed to discover how the chips are removed during the milling process. Brittle and ductile cutting regimes corresponding to machined surfaces and chips are discussed. Experiments have shown that single-crystal silicon can be ductile machined using micro-end-milling process. Forces generated when micro-end-milling single-crystal silicon are used to determine the performance of the milling process. Experimental results show that the dependence of the cutting force on the uncut chip thickness can be well described by a polynomial function order n. As cutting regime becomes more brittle, the cutting force has more complex function.     

Hefestos: an intelligent system applied to ubiquitous accessibility

This article proposes Hefestos, an intelligent system applied to ubiquitous accessibility. This model uses ubiquitous computing concepts to manage accessibility resources for people with disabilities. Among the concepts employed, context awareness, user profiles and trails management can be highlighted. The paper proposes an ontology for accessibility and delineates scenarios of its application in everyday life of people with disabilities. Moreover, the implementation of a smart wheelchair prototype and its application in a practical experiment is described. Ten users with a range of disability degrees tried the system and filled out a survey based on the technology acceptance model. This experiment demonstrated the main functionalities and the acceptance of the system. The results showed 96 % of acceptance regarding perceived easy of use and 98 % in perceived usefulness. These results were encouraging and show the potential for implementing Hefestos in real life situations.     

Performance Comparisons Between Thumb-Based and Finger-Based Input on a Small Touch-Screen Under Realistic Variability

The potential benefits of thumb-based touch interaction have not been fully exploited due to its usability problems and performance deterioration. Despite the well-known problems, mobile phone users often prefer thumb-based input method in their daily context of use. Without understanding input performance under realistic variability, design solutions may not address the problems adequately. This research aims to evaluate performance of one-handed thumb-based input compared to cradled finger-based input for the large number of users and varying task conditions. By investigating performance under a range of user- and task-variability, common patterns can be identified to help infer realistic performance in context of use. For this experiment, 259 participants were recruited balanced on gender and age. They performed user testing of moving an icon on a mobile touch-screen. Overall, the one-handed thumb input showed a 30% reduction in throughput compared to the cradled finger-based input, with significant reduction in speed and accuracy. Reduced throughput is attributed to inaccuracy rather than speed. In addition, the partial effects of touch position, dragging direction, and target size were investigated and quantified. In conclusion, performance could maintain constant throughput only for the finger-based input of limited task conditions, when realistic variability was introduced. Also, high variance of throughput for the thumb-based input led to poor conformity to Fitts’s law. The findings have implications for design of thumb-based touch interface to offset performance reduction and characterizing performance measure for thumb-based input method.     

Measurement feedback control for a class of feedforward nonlinear systems

We propose a measurement feedback controller for a class of feedforward nonlinear systems under sensor noise. The sensor noise has unknown magnitude, frequency, and phase. Our proposed controller is coupled with a low‐pass filter in such a way that the sensor noise is attenuated. We show that the controlled system results in bounded states whose ultimate bounds are inversely proportional to the minimum frequency of the sensor noise. Our result is further generalized to work in a case where the sensor noise is only required to have a Fourier transform with finite energy. Moreover, if the sensor noise enters only at partial states, depending on the location of the sensor noise, the ultimate bounds of the particular states can be made arbitrarily small via the gain factor of the controller. Copyright © 2012 John Wiley & Sons, Ltd.     

An object-based middleware supporting efficient interoperability on a smart home network

This paper proposes a novel object-based home network middleware for supporting the interoperability among home devices and smart grid devices. This middleware provides various types of abstract objects for flexible representation of heterogeneous home devices, which are classified based on their characteristics. It is also flexible enough to allow addition of new protocols and message conversion between different protocols through an abstraction layer, which are not supported by existing home network middlewares so that various protocols can be supported. As a result, it can be utilized to provide the interoperability among a variety of devices from sensors to typical home appliances as well as smart grid devices such as a home electric generator and a battery, which adopt different protocols. In order to demonstrate that home devices and smart grid devices are interoperable through the proposed middleware, we implement applications based on the middleware on a target platform consisting of embedded boards, sensors and laptops for emulation purposes of a home network. According to our emulation, this middleware can provide efficient interoperability among home devices and smart grid devices for future energy efficient home.     

Publishers’ relationships on the web: An examination of how publishers’ websites are causing changes in relations in the book industry

This research, funded by the British National Bibliography Research Fund, examined how publishers’ websites are causing changes in relations in the book industry in order to gain further understanding of the implications of the impact of the Internet on the publishing chain. The paper is set within the context of the development of electronic commerce and how business to consumer commerce is now being overtaken by the activity in business to business trading. Publishers have followed the main business trends in using their websites to develop relationships directly with the consumer, but have been rather slower in developing their business to business activity through the Internet. This study investigated what changes were taking place as a result of current publisher activity on the Web and how these changes were affecting the traditional lines of communication in the book industry. An analysis of a range of consumer publishers’ websites was carried out to see what facilities they were offering both to the general public and to business partners within the industry. Questionnaires and interviews were then conducted to establish how publishers, booksellers and wholesalers were using publishers’ websites and whether these sites were beneficial to the industry as a whole. Facilities found on the websites were examined and analysed in order to determine their usefulness and how they might be developed to aid business to business commerce. Additionally, several issues relating to online sales, changes in sales patterns and changes in working methods were discussed. Although an amount of quantitative data is included in the report, many of the issues raised relied on the perceptions and opinions of practitioners in the book trade.