Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

Computational Nonlinear Thermomechanical Model of Large Light Partition Walls Based on Experimental Analysis and Probabilistic Models

Abstract: This article is devoted to the construction of a computational nonlinear thermomechanical model of large light partition walls made up of cardboard‐plasterboard‐cardboard (CPC) plates screwed to a metallic frame, and is submitted to mechanical and thermal loadings induced by fire. The computational model, based on experimental analysis and a probabilistic modeling, is developed for the prediction of a large light partition wall for (1) its linear thermal behavior, (2) its nonlinear mechanical behavior, and (3) its nonlinear thermomechanical behavior.     

Ein Konzept zur Wirkungsgradoptimierung von Einzylinder-Dieselgeneratoren mittels Optimalsteuerung und Extremum-Seeking

In this contribution the problem of maximizing the efficiency of a hybrid power unit at a specified output power level by optimizing the generator current trajectory as well as the design variables that can be chosen during the machine design process is investigated. The concept is demonstrated based on a hybrid single-cylinder diesel engine that is coupled to an electric generator. By developing a model of the system and using open-loop optimal control the optimal operating strategy and the optimal machine design are determined. Besides that, the problems occurring in the application of this strategy to a test rig are discussed. For this purpose, a model-free real-time optimization concept based on extremum seeking control is presented. The effectiveness of both the model-based and the model-free concept are demonstrated by simulation and experimental results.     

High‐Temperature Creep Behavior of Dense SiOC‐Based Ceramic Nanocomposites: Microstructural and Phase Composition Effects

In this work, dense monolithic polymer‐derived ceramic nanocomposites (SiOC, SiZrOC, and SiHfOC) were synthesized via hot‐pressing techniques and were evaluated with respect to their compression creep behavior at temperatures beyond 1000°C. The creep rates, stress exponents as well as activation energies were determined. The high‐temperature creep in all materials has been shown to rely on viscous flow. In the quaternary materials (i.e., SiZrOC and SiHfOC), higher creep rates and activation energies were determined as compared to those of monolithic SiOC. The increase in the creep rates upon modification of SiOC with Zr/Hf relies on the significant decrease in the volume fraction of segregated carbon; whereas the increase of the activation energies corresponds to an increase of the size of the silica nanodomains upon Zr/Hf modification. Within this context, a model is proposed, which correlates the phase composition as well as network architecture of the investigated samples with their creep behavior and agrees well with the experimentally determined data.     

Modification of the La0.6Sr0.4CoO3 coating deposited on ferritic stainless steel by spray pyrolysis after oxidation in air at high temperature

The behaviour of La_0.6Sr_0.4CoO₃ applied to ferritic stainless steel (AISI 430) by spray pyrolysis was investigated after oxidation at 800 °C in air. The film was characterized with regard to its morphology, structure and adhesion. The film was regular over the entire surface and adhered well to the metallic substrate. Oxidation modified the film structure, forming an oxide (SrCrO₄) in the metal/coating region due to Sr diffusion from the coating and Cr diffusion from the metallic substrate. A thermodynamic computational simulation confirmed the formation and stability of this oxide.     

Wachstumsmessungen von Kristallen in sauberen und verunreinigten Lösungen: Einzelkristall vs. Kollektiv

Information about crystal growth rates and the influence of impurities are essential for the design of industrial crystallization processes. Here, the influence of trivalent metal ions Fe³⁺ in solution and adsorbed in the crystal on the growth and dissolution rate is investigated. The results clearly show kinetic and thermodynamic effects caused by impurities which have to be taken into account in the equipment design. Furthermore, effects of growth rate dispersion must be excluded by investigation of crystal collectives. Additionally, the crystal growth data should be obtained from real starting solutions.     

Diamantartige Kohlenstoffschichten steigern die Effizienz

Diamond‐like carbon thin films enhance efficiency — laser arc deposition of ta‐C Rising prices for fossil fuels as well as the increasing effects of the climate change due to the emission of greenhouse gases reveal the necessity of saving energy. Low friction coatings have an enormous potential in saving energy. Carbon based coatings — named as DLC coatings — are especially well suited for low friction coatings. In particular hydrogen‐free tetrahedral amorphous carbon (ta‐C) coatings are of great interest due to their extraordinary low wear properties. In addition they show excellent low friction properties and especially in combination with specific lubricants the so‐called super low friction effect. For the deposition of ta‐C coatings PVD methods have to be applied instead of CVD methods as it is the case for conventional DLC coatings. We have developed a deposition method which is based on a pulsed arc steered by a laser (Laser‐Arc). This allows us to use large cathodes resulting in a high long‐term stability. Furthermore, the carbon plasma source can be combined with a filtering unit removing almost all droplets and particles, which usually are characteristic for an arc process. The resulting Laser‐Arc source allows for the deposition of smooth and virtually defect‐free ta‐C coatings with a competitive deposition rate.