Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures—An AFM study

Atomic force microscopy (AFM) has been used to study the morphology and microstructure of an amine-cured epoxy before and after outdoor exposure. Measurements were made from samples prepared in an essentially CO₂-free, H₂O-free glove box and from samples prepared in ambient conditions. For those prepared in a CO₂-free glove box, AFM imaging was conducted on (1) an unexposed air/coating surface, (2) an unexposed coating bulk, (3) an unexposed coating/substrate interface, and (4) a field exposed air/coating surface. For samples prepared in ambient conditions, only the unexposed air/coating surface was investigated. The same regions of the exposed samples were scanned periodically by the AFM to monitor changes in the surface morphology of the coating as UV exposure progressed. Small angle neutron scattering and Fourier transform infrared spectroscopy (FTIR) studies were performed to verify the microstructure and to follow chemical changes during outdoor exposure, respectively. The results have shown that amine blushing, which occurs only under ambient conditions, had a significant effect on the surface morphology and microstructure of the epoxy. The surface morphology of the samples prepared under CO₂-free, dry conditions was generally smooth and homogeneous. However, the interface and the bulk samples clearly revealed a two-phase structure consisting of bright nodular domains and dark interstitial regions, indicating an inhomogeneous microstructure. Such heterogeneous structure of the bulk was in good agreement with results obtained by small angle neutron scattering of unexposed samples and by AFM phase imaging of the degraded sample surface. The relationship between submicrometer physical changes and molecular chemical degradation is discussed. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

Polymer modification and synthesis using sulphenyl derivatives: 9. Addition of alkylsulphenyl chlorides to cis-1, 4-polybutadiene

Methanesulphenyl chloride and n-butanesulphenyl chloride add readily across the double bonds in cis-1,4-polybutadiene. The addition is highly regioselective so that long sequences of saturated units are formed. The products are very unstable, evolving hydrogen chloride on standing, but can be stabilized by replacing the labile chlorine atom with other nucleophiles in a phase transfer catalysed reaction.     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.     

Effect of dopants on the performance of CuO–CeO2 catalysts in methanol steam reforming

Steam reforming of methanol was carried out over a series of doped CuO–CeO₂ catalysts prepared via the urea–nitrate combustion method. XRD analysis showed that at least part of the dopant cations enter the ceria lattice. The addition of various metal oxide dopants in the catalyst composition affected in a different way the catalytic performance towards H₂ production. Small amounts of oxides of Sm and Zn improved the performance of CuO–CeO₂, while further addition of these oxides caused a decrease in catalyst activity. XPS analysis of Zn- and Sm-doped catalysts showed that increase of dopant loading leads to surface segregation of the dopant and decrease of copper oxide dispersion. The addition of oxides of La, Zr, Mg, Gd, Y or Ca lowered or had no effect on catalytic activity, but led to less CO in the reaction products. Noble-metal modified catalysts had slightly higher activity, but the CO selectivity was also significantly higher.     

Sub-ambient cold-start emissions reduction using SwRI® PO x catalyst technology

This paper describes the application of SwRI’s cold-start PO _x catalyst technology to reduce cold-start hydrocarbon emissions from a US Tier 2 vehicle at −7 °C. A reduction in −7 °C (20 °F) cold-start hydrocarbons will help US Tier 2 vehicles meet the proposed EPA NMOG standards. Improvements in cold temperature hydrocarbon emissions would also be beneficial in many parts of Europe during the winter months. In this work, a total hydrocarbon reduction of 19% was realized at 24 °C, in line with previous results, but only up to 3% at −7 °C. Insufficient oxygen in the engine-out exhaust gas at −7 °C was determined to be the reason why the PO _x catalyst failed to significantly reduce HC emissions. Addition of supplemental oxygen to the exhaust during the cold-start, to simulate an adjustment in the engine calibration to less rich operation, resulted in a total hydrocarbon reduction of 18% with the PO _x catalysts in place, but no benefit when the PO _x catalysts were removed. Hence, the PO _x catalyst approach can be used to good effect, even under sub-ambient cold-start conditions.     

Feeding response of Ips paraconfusus to phloem and phloem metabolites of Heterobasidion annosum-inoculated ponderosa pine,Pinus ponderosa

In studies of feeding by the bark beetle, Ips paraconfusus, two pine stilbenes (pinosylvin and pinosylvin methyl ether), ferulic acid glucoside, and enantiomers of the four most common sugars present in ponderosa pine phloem (sucrose, glucose, fructose, and raffinose) did not stimulate or reduce male feeding when assayed on wet -cellulose with or without stimulatory phloem extractives present. When allowed to feed on wet -cellulose containing sequential extracts (hexane, methanol, and water) of ponderosa pine phloem, methanol and water extractives stimulated feeding, but hexane extractives did not. Males confined in wet -cellulose containing aqueous or organic extracts of culture broths derived from phloem tissue and containing the root pathogen, Heterobasidion annosum, ingested less substrate than beetles confined to control preparations. In an assay using logs from uninoculated ponderosa pines, the mean lengths of phloem in the digestive tracts increased as time spent feeding increased. Males confined to the phloem of basal logs cut from ponderosa pines artificially inoculated with H. annosum ingested significantly less phloem than beetles in logs cut from trees that were (combined) mock-inoculated or uninoculated and did not contain the pathogen. However, individual pathogen-containing treatments were not significantly different from uninoculated controls. It was concluded that altered feeding rates are not a major factor which may explain why diseased ponderosa pines are colonized by I. paraconfusus.     

Engineering a pharmacologically superior form of leptin for the treatment of obesity

Leptin plays a central role in the homeostasis of body weight through its regulatory effects on appetite and energy expenditure, yet in trials as a therapeutic agent for the treatment of obesity in humans it has been disappointing. The poor clinical efficacy of leptin results from its short circulating half-life, low potency and poor solubility, necessitating large and frequent doses to obtain even modest clinical benefit. Engineered Fc-leptin immunofusins, consisting of the Fc fragment of an immunoglobulin gamma chain followed by leptin, exhibit improved pharmacological properties with very consistent and potent biological activities. Furthermore, in extending the circulating half-life of the protein in vivo from a few minutes for leptin to many hours for Fc-leptin, these proteins have the potential to reduce drastically the dosage and frequency of administration required to obtain clinical benefit. The results of this study show that the engineered leptin immunofusins described here have significantly enhanced pharmacological properties in comparison with the recombinant leptin that was used in clinical trials. As such, they could represent an important step towards a therapeutically superior form of leptin if the disappointing performance of leptin in early clinical trials was due to its poor pharmacological properties rather than any conceptual weakness in the strategy of using leptin for the treatment of obesity and its related disorders.     

Mechanism of paper wet strength development by polycarboxylic acids with different molecular weight and glutaraldehyde/poly(vinyl alcohol)

In our previous research, we found that crosslinking paper using poly(carboxylic acid)s with different molecular weight or using the combination of glutaraldehyde and poly(vinyl alcohol) (PVA) significantly improved the wet strength of the paper. In this research, we studied the mechanism of paper wet strength development using crosslinking systems with different molecular weight by measuring scanning electron microscopic (SEM) images, wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. The paper crosslinked by a high‐molecular weight (MW) poly(carboxylic acid) shows more swelling by water than that crosslinked by a low‐MW polycarboxylic acid in the SEM micrographs even though both treated paper samples have similar wet strength. Thus, the data suggest that high‐MW poly(carboxylic acid)s promote the formation of interfiber crosslinking. Crosslinking paper by glutaraldehyde, a crosslinking agent of small molecular size, improves wet strength and reduces flexibility and swellability of paper because of the formation of intrafiber crosslinking. Combining glutaraldehyde with PVA as a coreactant increases wet strength and also retains flexibility and swellability of the treated paper because of the formation of interfiber crosslinking. The hypothesis that PVA reacts with glutaraldehyde to form a polymeric pentanedialated‐PVA crosslinking system and promotes the formation of interfiber crosslinking on the paper is supported by the data of wet strength, folding endurance, wet thickness, water retention, and Z‐direction tensile strength of the treated paper. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 277–284, 2006     

The effect of tetraethylammonium cation adsorption on the pzc of the mercury—perchloric acid interphase

The acid activity dependence of pzc for the mercury—perchloric acid aqueous solution interphase was studied, and the results compared with previously reported values. Then, the pzc shift caused by tetraethylammonium (TEA) perchlorate addition to constant activity perchloric acid solutions is reported, and an expression for the Esin—Markov coefficient is given. The need for using activity values is discussed on the basis of quantitive data.     

EVAPORATION FROM POROUS MEDIA: A CAPILLARY MODEL OF A PENETRATING FRONT

A capillary tube model was solved to investigate the influence of mass transfer coefficient, temperature, and front depth on the evaporation rate during the penetrating-front period of water-filled porous media dried in hot air. The results show that increasing the flow rate of the drying air is not so efficient as increasing the sample temperature. Due to attenuating diffusion rate, the rate of liquid front migration decreases with time. The calculations explain the falling rate period behavior of sandstone heated at 121°C. Trends depicted by the model may be useful for the design of heating conditions for drying processes.