Nitrogen dynamics during till and no-till pasture restoration sequences in Rondônia,Brazil

The clearing of tropical rain forest in the Amazon basin has created large areas of cattle pasture that are now declining in productivity. Practices adopted by ranchers to restore productivity to degraded pastures have the potential to alter soil N availability and gaseous N losses from soils. We examined how soil inorganic N pools, net N mineralization and net nitrification rates, nitrification potential and NO and N₂O emissions from soils of a degraded pasture responded to the following restoration treatments: (1) soil tillage followed by replanting of grass and fertilization, (2) no-till application of non-selective herbicide, planting of rice, harvest followed by no-till replanting of grass and fertilization, and (3) the same no-till sequence with soybeans instead of rice. Tillage increased soil NH₄⁺ and NO₃^? pools but NH₄⁺ and NO₃^? pools remained relatively constant in the control and no-till treatments. Cumulative rates of net N mineralization and net nitrification during the first 6 months after treatment varied widely but were hightest in the tilled treatment. Emissions of NO and N₂O fluxes increased with tillage and with N fertilization. There were no clear relationships among rates of N fertilizer application, net N mineralization, net nitrification, NO, N₂O and total N oxide emissions. Our results indicate that pasture restoration sequences involving tilling and fertilizing will increase emissions of N oxides, but the magnitude of the increase is likely to differ based on timing of fertilizer application relative to the presence of plants and the magnitude of plant N demand. Emissions of N oxides appear to be decreased by the use of restoration sequences that minimize reductions in pasture grass cover.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Morphological and electrochemical investigation of RuO<Subscript>2</Subscript>–Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> oxide films prepared by the Pechini–Adams method

Preparation methods can profoundly affect the structural and electrochemical properties of electrocatalytic coatings. In this investigation, RuO₂–Ta₂O₅ thin films containing between 10 and 90 at.% Ru were prepared by the Pechini–Adams method. These coatings were electrochemically and physically characterized by cyclic voltammetry, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The composition and morphology of the oxide were investigated before and after accelerated life tests (ALT) by EDX and SEM. SEM results indicate typical mud-flat-cracking morphology for the majority of the films. High resolution SEMs reveal that pure oxide phases exhibit nanoporosity while binary compositions display a very compact structure. EDX analyses reveal considerable amounts of Ru in the coating even after total deactivation. XRD indicated a rutile-type structure for RuO₂ and orthorhombic structure for Ta₂O₅. XPS data demonstrate that the binding energy of Ta is affected by Ru addition in the thin films, but the binding energy of Ru is not likewise influenced by Ta. The stability of the electrodes was evaluated by ALT performed at 750 mA cm⁻² in 80 °C 0.5 mol dm⁻³ H₂SO₄. The performance of electrodes prepared by the Pechini–Adams method is 100% better than that of electrodes prepared by standard thermal decomposition.     

Ethylene Hydrogenation over Pt/Ga2O3/Al2O3 Catalysts

The effects of gallia addition on the Pt dispersion and the activity for ethylene hydrogenation at 0 °C were studied for Pt-supported catalysts as a function of the reduction temperature (350, 450, and 550 °C). The catalysts contained 0.5 wt.% Pt and were prepared by successive incipient wetness impregnations with Ga(NO₃)₃ and H₂PtCl₆ aqueous solutions. CO and H₂ chemisorption data indicated that, the addition of small amount of Ga₂O₃ caused an increase of the Pt dispersion and a decrease of ethylene conversion. Both of them decreased appreciably when Ga₂O₃ addition was increased, particularly, for the case where β-Ga₂O₃ was used as a support. The increase in reduction temperature magnified the negative effects of the gallia addition on dispersion and activity, although the addition of small amount of gallia improved the resistance to metal sintering. Results were interpreted in terms of the presence of reduced Ga species, which can encapsulate Pt particles.     

Feasibility of determining corrosion rates by means of stray current-induced polarisation

To measure metal corrosion it is necessary to make direct physical contact with the specimen or component acting as the working electrode. The most widely used method for determining the corrosion current is electrochemical, the so-called polarisation resistance method. The feasibility of a new method to polarise the metal without the need for direct physical contact was investigated in the present study. The required potential shift is obtained by induction of a current using an external electrical field. The model used for calculation of the corrosion rate assumes that the applied current runs in parallel through the electrolyte and the metal, and electrostatically polarises the metal. The overall electrical resistance of the system can then be expressed as , where R _e+M is the total resistance measured, R _e is electrolyte resistance and R _M is resistance due to the metal. This latter resistance to electrostatic polarisation is related to the faradaic reaction, which was verified by comparison with the gravimetric losses. This resistance has been called inductive polarisation resistance R _pi to distinguish it from the traditional polarisation resistance R _p.     

Corrosion of reinforcing steel in neutral and acid solutions simulating the electrolytic environments in the micropores of concrete in the propagation period

Steel embedded in concrete passivates due to the alkaline nature of the concrete pore solution. Reinforcement corrosion develops when the alkalinity is neutralized. Corrosion, in turn, induces acidification of the surrounding pore solution. In the present paper, corrosion rate of corrugated steel bars is studied and measured at different pH values in solutions simulating chloride environments. The media considered consists of saturated calcium hydroxide solutions containing Na and K⁺, neutralized with ferrous chloride. This latter substance is the soluble compound produced during the corrosion of steel after chloride attack. Hydrochloric acid solutions of different pHs were prepared in order to compare the steel corrosion rates in these solutions with those observed in ferrous chloride solutions of the same pH. A comparison of polarization resistance measurements (R_p) with gravimetrically weight loss determined is presented. Tafel slopes results are also included. Additionally, a comparison is made between measurements of AC impedance with those of the R_p method. The results indicate that the corrosion rate in the studied media follows the general trend found in other media of similar pH values: corrosion increases in acidic solutions, remains rather stable for pH range 3-11 and decreases significantly in highly alkaline solutions.     

Secondary Metabolic Profile as a Tool for Distinction and Characterization of Cultivars of Black Pepper (Piper nigrum L.) Cultivated in Pará State,Brazil

This study evaluated the chemical compositions of the leaves and fruits of eight black pepper cultivars cultivated in Pará State (Amazon, Brazil). Hydrodistillation and gas chromatography–mass spectrometry were employed to extract and analyze the volatile compounds, respectively. Sesquiterpene hydrocarbons were predominant (58.5–90.9%) in the cultivars “Cingapura”, “Equador”, “Guajarina”, “Iaçará”, and “Kottanadan”, and “Bragantina”, “Clonada”, and “Uthirankota” displayed oxygenated sesquiterpenoids (50.6–75.0%). The multivariate statistical analysis applied using volatile composition grouped the samples into four groups: γ-Elemene, curzerene, and δ-elemene (“Equador”/“Guajarina”, I); δ-elemene (“Iaçará”/“Kottanadan”/“Cingapura”, II); elemol (“Clonada”/“Uthirankota”, III) and α-muurolol, bicyclogermacrene, and cubebol (“Bragantina”, IV). The major compounds in all fruit samples were monoterpene hydrocarbons such as α-pinene, β-pinene, and limonene. Among the cultivar leaves, phenolics content (44.75–140.53 mg GAE·g⁻¹ FW), the enzymatic activity of phenylalanine-ammonia lyase (20.19–57.22 µU·mL⁻¹), and carotenoids (0.21–2.31 µg·mL⁻¹) displayed significant variations. Due to black pepper’s susceptibility to Fusarium infection, a molecular docking analysis was carried out on Fusarium protein targets using each cultivar’s volatile components. F. oxysporum endoglucanase was identified as the preferential protein target of the compounds. These results can be used to identify chemical markers related to the susceptibility degree of black pepper cultivars to plant diseases prevalent in Pará State.     

Box-Behnken Design a Key Tool to Achieve Optimized PCL/Gelatin Electrospun Mesh

Hybrid electrospun nanofibers of polycaprolactone (PCL)/gelatin are considered as drug-delivery systems for increasing the treatment efficacy in superficial (skin) wounds. Continuous delivery of therapeutic agents, skin extracellular matrix similarity, management of wound exudate, and antimicrobial barrier effect are the major advantages of electrospun nanofibers in skin applications. Additionally, combining the favorable properties of PCL and gelatin, regarding their biocompatibility, biodegradability and mechanical performance have been revealed promising parameters to be considered for blend in hybrid structures. However, the usual optimization protocol of nanofibers’ production in electrospinning is based on the observation of one-variable-at-time being this methodology expensive and time-consuming. Therefore, in this research work, a statistical model based on four input variables namely, the flow rate, the needle-working distance, the applied voltage, and the ratio of PCL in the solution, is developed to predict the behavior of nanofibers. The performance of nanofibers is monitored by measurements of fiber's diameter, mesh's thickness, and mesh's permeability. Overall, the model showed to be statistically significant (p-value < 0.05) and an independent analysis validated the predicted response for optimal condition. Finally, a delivery study is performed to evaluate the electrospun mesh performance as a drug carrier.     

Loliolide,a New Therapeutic Option for Neurological Diseases? In Vitro Neuroprotective and Anti-Inflammatory Activities of a Monoterpenoid Lactone Isolated from Codium tomentosum

Parkinsons Disease (PD) is the second most common neurodegenerative disease worldwide, and is characterized by a progressive degeneration of dopaminergic neurons. Without an effective treatment, it is crucial to find new therapeutic options to fight the neurodegenerative process, which may arise from marine resources. Accordingly, the goal of the present work was to evaluate the ability of the monoterpenoid lactone Loliolide, isolated from the green seaweed Codium tomentosum, to prevent neurological cell death mediated by the neurotoxin 6-hydroxydopamine (6-OHDA) on SH-SY5Y cells and their anti-inflammatory effects in RAW 264.7 macrophages. Loliolide was obtained from the diethyl ether extract, purified through column chromatography and identified by NMR spectroscopy. The neuroprotective effects were evaluated by the MTT method. Cells’ exposure to 6-OHDA in the presence of Loliolide led to an increase of cells’ viability in 40%, and this effect was mediated by mitochondrial protection, reduction of oxidative stress condition and apoptosis, and inhibition of the NF-kB pathway. Additionally, Loliolide also suppressed nitric oxide production and inhibited the production of TNF-α and IL-6 pro-inflammatory cytokines. The results suggest that Loliolide can inspire the development of new neuroprotective therapeutic agents and thus, more detailed studies should be considered to validate its pharmacological potential.