Biosurfactant Mediated Biosynthesis of Selected Metallic Nanoparticles

Developing a reliable experimental protocol for the synthesis of nanomaterials is one of the challenging topics in current nanotechnology particularly in the context of the recent drive to promote green technologies in their synthesis. The increasing need to develop clean, nontoxic and environmentally safe production processes for nanoparticles to reduce environmental impact, minimize waste and increase energy efficiency has become essential in this field. Consequently, recent studies on the use of microorganisms in the synthesis of selected nanoparticles are gaining increased interest as they represent an exciting area of research with considerable development potential. Microorganisms are known to be capable of synthesizing inorganic molecules that are deposited either intra- or extracellularly. This review presents a brief overview of current research on the use of biosurfactants in the biosynthesis of selected metallic nanoparticles and their potential importance.     

Influence of hydrodynamic instability on the heat transfer coefficient during condensation of R134a and R404A refrigerants in pipe mini-channels

This paper presents the results of an investigation of the influence of hydrodynamic instabilities on heat transfer intensity during the condensation of R134a and R404A refrigerants in pipe mini-channels. The heat transfer coefficient h is a measure of the effectiveness of the condensation process. It is particularly important to determine the value of the coefficient in the two-phase condensation area in a compact condenser. In other condenser areas (i.e., precooling of superheated vapor and subcooling of condensate), the heat efficiency is substantially smaller. Hydrodynamic instabilities of a periodic nature have an influence on size changes in these areas. A decrease in the heat transfer coefficient h in the two-phase area results in decreased intensity of the heat removal process in the whole condenser.The experimental investigations were based on the condensation of R134a and R404A refrigerants in horizontal pipe mini-channels with internal diameters of d = 0.64; 0.90; 1.40; 1.44; 1.92; 2.30 and 3.30 mm. Disturbances of the condensation process were induced with a periodic stop and a repetition of the flow of the refrigerant.In the range of frequencies, f = 0.25–5 Hz, of the periodically generated disturbances, an unfavorable influence on the intensity of the heat transfer during the condensation process in pipe mini-channels was identified. The reduction in the intensity of the heat transfer during the condensation process, which was induced with hydrodynamic instabilities, was presented in the form of the dependence of the heat transfer coefficient h on the vapor quality x and the frequencies f of the disturbances.The influence of the refrigerant, the diameter of the mini-channels and the frequency f on the damping phenomenon of the periodical disturbances in the pipe mini-channels was identified.     

Multivitamin Analysis of Fruits, Fruit–Vegetable Juices, and Diet Supplements

Vitamins are organic compounds that are required for various biological functions. In general, vitamins are not synthesized in the human body, but lack or deficiency of them may lead to certain diseases. Determinations of 11 vitamins in various products were performed, which included ascorbic acid (C), seven vitamins of the B group (thiamine B₁, riboflavin B₂, nicotinamide B₃, pantothenic acid B₅, pyridoxine B₆, folic acid B₉, and cyanocobalamin B₁₂), as well as three fat-soluble vitamins (retinol A, cholecalciferol D₃, and α-tocopherol E). A column with RP18 stationary phase and a diode array detector with properly selected analytical wavelengths for each compound were used. A gradient of trifluoroacetic acid in water with methanol was used as the mobile phase. Limits of quantification in the range of 0.70–2.90 μg/mL for water-soluble vitamins and 1.85–15.84 μg/mL for fat-soluble vitamins were obtained. Those values are sufficient for determinations of the aforementioned compounds in foodstuff. The developed procedure of sample preparation together with chromatographic system can be used for food quality monitoring in the food industry.     

PolyMorph: Increasing the Spelling Efficiency of P300 by Selection Matrix PolyMorphism and Sentence-Based Predictions

One application of the P300 brain electric signal is sentence spelling, which enables subjects who have lost control of their motor pathways to communicate by selecting characters in a matrix containing all alphabet symbols. This technology still suffers from both low communication/high error rates. A P300 speller, named PolyMorph, which jointly introduces the selection matrix polymorphism (reducing the matrix size by removing useless symbols) and sentence-based predictions (which forecast words on the basis of language statistics) is presented. This is accomplished by using a custom dynamic knowledge-base, tailored to the subject lexicon, and updated in real time with the selections of the subject. The effectiveness of the presented speller is measured in vivo and in silico. The results suggest that the use of PolyMorph increases the number of spelt characters per time unit and reduces the error rate.     

Impact of precursor preparation on density of gadolinium iron garnets synthesized via reactive sintering

Gadolinium iron garnet was obtained from two different precursors, homogenized in isopropyl alcohol and in an aqueous environment with a fixed pH. In the first case, it was a mixture of goethite (FeO(OH)) and gadolinium oxide (Gd₂O₃); in the second, a mixture of GdIP (GdFeO₃) and α-Fe₂O₃. Conditions of homogenization in the aqueous environment were selected based on the zeta (ξ) potential measurements as the function of pH. DSC measurements of the output powder mixtures allowed the identification of the effects observed during the temperature rise. In the case of the material obtained from a mixture of goethite (FeO(OH)) and gadolinium oxide, with the increasing temperature, we observe three effects, the first of which corresponds to the phase transformation of goethite into α-Fe₂O₃, the second corresponds to the reaction of gadolinium iron perovskite (GdIP) formation, and the third to the reaction in which a gadolinium iron garnet (GdIG) is formed. However, in the case of heat treatment of the mixture of GdIP and α-Fe₂O₃, we only observe the effect responsible for a solid state reaction leading to the formation of gadolinium iron garnet. Dilatometric measurements allowed to determine the changes in linear dimensions at various stages of reaction sintering. The resulting materials were sintered at temperatures of 1200, 1300, and 1400 °C. In the case of the material obtained from a mixture of perovskite and iron (III) oxide, already at the temperature of 1300 °C, a density has been obtained at around 95% of the theoretical density, and the temperature of 1400 °C allowed achieving a density of 97% of the theoretical density. Whereas, for the material obtained from a mixture of goethite (FeO(OH)) and gadolinium oxide, a density above 95% of theoretical density was achieved only at 1400 °C.     

In vitro culture of Boletus badius as a source of indole compounds and zinc released in artificial digestive juices

Food Science and Biotechnology - The objective of this study was to obtain the in vitro cultures of Boletus badius under controlled conditions and investigate the release of indole compounds and...     

Correlation between structural and electrical properties in highly porous (Y,Sr)(Ti,Nb)O3−δ SOFC anodes

In order to find a relationship between structural and electrical properties, niobium and yttrium doped SrTiO₃ ceramics were prepared via solid-state reaction. The samples were sintered in hydrogen and air conditions. The samples were also fabricated with a pore-former to obtain highly porous specimens. The electrical properties of Nb-doped SrTiO₃ samples and yttrium and niobium co-doped SrTiO₃ were compared. The comparable electrical properties were observed and discussed according to previous literature reports. It was noticed that the synthesis in a reducing hydrogen atmosphere can increase the solubility of dopants. Moreover, the samples sintered in air presented lower conductivity level and worse structural properties than the samples sintered in hydrogen. The explanation of obtained results was also suggested and discussed.     

Polycationic star polymers with hyperbranched cores for gene delivery

Core-shell type stars synthesized via atom transfer radical polymerization were used for the delivery of nucleic acids. The interior of the stars consisted of hyperbranched poly(arylene oxindole), while the arms were composed of poly(N,N-dimethylaminoethyl methacrylate). The length of the star arms varied in degree of polymerization (DP) from 14 to 98. The hydrodynamic radius of the structures measured in water indicated the presence of small aggregates, while isolated stars ranging in size from 14 to 29 nm were seen in organic solvent. The phase transition temperatures of the stars in water, measured in basic conditions, were shifted to lower values with increasing DP of the arms. Stable polyplexes of stars with plasmid DNA were formed. Their size varied from 300 nm to 400 nm, depending upon the DP of arms. The zeta potential of the polyplexes was positive, which facilitated their cellular uptake. The DP of the arms influenced the transfection efficiency of HT-1080 cells, demonstrating that stars are promising candidates for synthetic gene vectors.