Determination of Dodecanol and Short‐Chained Ethoxylated Dodecanols by LC–MS/MS (with Electrospray Ionization) After Their Derivatization (with Phenyl Isocyanate)

This report describes the application of LC–MS/MS for the separation of dodecanol (C₁₂OH) and homogenous fatty alcohols ethoxylated (AE) containing a dodecyl moiety and 1–9 ethoxy groups. These ethoxylates and free alcohol were derivatized for LC–MS/MS analysis with phenyl isocyanate (PIC). The derivatives of analytes with PIC were separated using a C18 column. Gradient elution with a mixture of ethyl acetate and acetonitrile (5 mM) was employed. The described determination method is characterized by low detection limits (range from 0.005 µg L^?1 for: C₁₂OH, C₁₂EO_2–7 to 1 µg L^?1 for C₁₂EO₁) and quantification limits (range from 0.01 µg L^?1 for: C₁₂EO_5–7 to 2 µg L^?1 for C₁₂EO₁). The developed and validated method was used in combination with liquid–liquid extraction (using ethyl acetate) in order to identify and quantitatively determine the C₁₂OH and C₁₂EO_1–9 present in environmental samples collected from Warta river water in Poznan.     

Multivitamin Analysis of Fruits, Fruit–Vegetable Juices, and Diet Supplements

Vitamins are organic compounds that are required for various biological functions. In general, vitamins are not synthesized in the human body, but lack or deficiency of them may lead to certain diseases. Determinations of 11 vitamins in various products were performed, which included ascorbic acid (C), seven vitamins of the B group (thiamine B₁, riboflavin B₂, nicotinamide B₃, pantothenic acid B₅, pyridoxine B₆, folic acid B₉, and cyanocobalamin B₁₂), as well as three fat-soluble vitamins (retinol A, cholecalciferol D₃, and α-tocopherol E). A column with RP18 stationary phase and a diode array detector with properly selected analytical wavelengths for each compound were used. A gradient of trifluoroacetic acid in water with methanol was used as the mobile phase. Limits of quantification in the range of 0.70–2.90 μg/mL for water-soluble vitamins and 1.85–15.84 μg/mL for fat-soluble vitamins were obtained. Those values are sufficient for determinations of the aforementioned compounds in foodstuff. The developed procedure of sample preparation together with chromatographic system can be used for food quality monitoring in the food industry.     

Maternal mental health and integrated programs for mothers with substance abuse issues.

To examine the impact of integrated treatment programs (those with substance use treatment and pregnancy-, parenting-, or child-related services) on maternal mental health, we compiled a database of studies of integrated programs published between 1990 and 2007 with outcome data on maternal mental health. There were 18 cohort studies, 3 randomized trials, and 2 quasi-experimental studies. Of the five studies comparing integrated to nonintegrated programs, three studies provided enough information to allow for them to be combined in a meta-analysis. The average effect size was 0.23 (95% CI = 0.15 to 0.31, SE = 0.04), p Q = 5.66, p = .059. This meta-analysis is the first systematic quantitative review of studies evaluating the impact of integrated programs on maternal mental health. Findings suggest that integrated programs may be associated with a small advantage over nonintegrated programs in improving maternal mental health. This review highlights the need for further research with improved methodology, study quality, and reporting to improve our understanding of how best to meet the mental health needs of mothers with substance abuse issues. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Solid‐State NMR Study of Mn2+ for Ca2+ Substitution in Thermally Processed Hydroxyapatites

In the present study calcium hydroxyapatites enriched at 0.08 wt% in Mn²⁺ ions (Mn–HA) and their unsubstituted forms (HA) were synthesized using the same standard wet chemical route. Mn‐HA and HA were both calcined at 800°C to give Mn‐HAc and HAc, respectively or sintered at 1250°C, to give Mn‐HAs and HAs, respectively. The influence of the heat treatment on physicochemical properties of Mn‐HA was investigated using powder X‐ray diffraction (PXRD), scanning, and transmission electron microscopy (SEM and TEM), and solid‐state nuclear magnetic resonance (ssNMR). Mn‐HAc and Mn‐HAs were compared to each other and to HAc and HAs, respectively. Assignment of the proton ssNMR peaks from high‐temperature‐treated apatites has been revised. It was found that Mn–HAc and HAc were nanocrystalline, while Mn‐HAs and HAs comprised micrometer sized, partially fused particles (SEM and TEM). PXRD and ssNMR demonstrated that the incorporation of Mn²⁺ into the crystal lattice of hydroxyapatite significantly facilitates its dehydroxylation and decomposition to oxyhydroxyapatite during calcination at 800°C, and induces its transformation to tetracalcium phosphate (TTCP) and alpha‐tricalcium phosphate (α‐TCP) at 1250°C. Contamination by CaO has also been detected. The ¹H→³¹P NMR cross‐polarization experiments have indicated that the Mn²⁺ ions preferentially occupied the Ca(I) position in the crystallographic unit cell of Mn‐HAc. In Mn‐HAs, the Mn²⁺ ions were evenly distributed between the Ca(I) and Ca(II) positions.     

Toughening of syndiotactic polypropylene with chalk

We hypothesized that polymer crystal anisotropy is advantageous for toughening of polymer composites involving easy slip network of oriented crystalline layers around filler particles. To this end, composites of syndiotactic polypropylene (sPP) with high concentration of submicrometer calcium carbonate particles were prepared and examined because usual sPP crystals exhibit high packing anisotropy. The specific orientation of sPP lamellae around chalk grains was found, which is supposed to facilitate the plastic deformation of polymer matrices. The compression molded bars of the composite exhibited markedly higher Izod impact strength than those of neat sPP. Toughening was even enhanced in the injection molded composite, for which 4.5‐fold increase in the impact strength was achieved. Injection‐induced orientation of the disordered form I sPP crystals was enhanced in the composite. The injection molded tensile specimens exhibited also a good drawability. Debonding at chalk–sPP interface occurred both during the impact and tensile tests facilitating the plastic deformation of sPP matrix. Chalk did not have any significant influence on the thermal properties of the composites but it affected the rheological behavior, increasing the loss and storage moduli, and the viscosity. Highly filled sPP composite exhibited solid‐like behavior in a molten state with the storage modulus exceeding the loss modulus in the entire frequency range. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43651.     

The influence of electron beam irradiation,plastic deformation,and re‐irradiation on crystallinity degree,mechanical and sclerometric properties of GUR 1050 used for arthroplasty

The article describes the influence of an electron beam irradiation (I), plastic deformation (D), and re‐irradiation (R) on the properties of ultrahigh molecular weight polyethylene (GUR 1050). It was found that the modification through irradiation entailed a gradual increase in the degree of crystallinity (after irradiation–I). After plastic deformation and re‐irradiation (IDR) the degree of crystallinity decreases which had a direct influence on the mechanical properties. The polymer irradiation only (technique I) resulted in an increase in the maximum stress as compared with the material in the initial state. The application of deformation and re‐irradiation (technique IDR) allowed increasing the deformation resistance by more than 40%. Moreover, the irradiation with an electron beam resulted in the increase in hardness (H) and Young's modulus (E) proportionally to the applied irradiation dose and in the reduction of total indentation work (W_tot) and its components. After deformation and re‐irradiation the polyethylene hardness went down. The application of technique (I) caused an improvement to the material abrasion resistance (reduction of parameter PD–working scratch depth) with the increasing irradiation dose. The introduction of deformation and re‐irradiation did not have a material impact on parameter (PD) increasing at the same time elastic properties of UHMWPE (increase in parameter NPS–elastic recovery). Modification IDR has changed the wear mechanism (β) toward ploughing and has increased the abrasion‐resistance index (W_β) and also significantly reduced the coefficient of friction (μ) of GUR 1050. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43683.     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

The Influence of Betulin and Its Derivatives EB5 and ECH147 on the Antioxidant Status of Human Renal Proximal Tubule Epithelial Cells

Betulin and its derivatives, 28-propyne derivative EB5 and 29-diethyl phosphonate analog ECH147, are promising compounds in anti-tumor activity studies. However, their effect on kidney cells has not yet been studied. The study aimed to determine whether betulin and its derivatives—EB5 and ECH147—influence the viability and oxidative status of human renal proximal tubule epithelial cells (RPTECs). The total antioxidant capacity of cells (TEAC), lipid peroxidation product malondialdehyde (MDA) level, and activity of antioxidant enzymes (SOD, CAT, and GPX) were evaluated. Additionally, the mRNA level of genes encoding antioxidant enzymes was assessed. Cisplatin and 5-fluorouracil were used as reference substances. Betulin and its derivatives affected the viability and antioxidant systems of RPTECs. Betulin strongly reduced TEAC in a concentration-dependent manner. All tested compounds caused an increase in MDA levels. The activity of SOD, CAT, and GPX, and the mRNA profiles of genes encoding antioxidant enzymes depended on the tested compound and its concentration. Betulin showed an cisplatin-like effect, indicating its nephrotoxic potential. Betulin derivatives EB5 and ECH147 showed different impacts on the antioxidant system, which gives hope that these compounds will not cause severe consequences for the kidneys in vivo.