Influence of addition of green tea and green coffee extracts on the properties of fine yeast pastry fried products

This study investigated the influence of antioxidants of green tea aqueous extract (GTE) and green coffee aqueous extract (GCE) in concentrations of 0.25, 0.5 and 1 g·100 g^? 1 on the nutritional properties of fine yeast pastry fried products such as donuts. Yeast donuts were made according to the traditional processing technology. In fried donuts physical properties (water activity, pH, hardness and color with the use of instrumental methods) as well as sensory properties were established. Moreover, quality of fat extracted from donuts (composition of fatty acids and peroxide value), content of acrylamide, composition of polyphenols and antioxidant activity were analyzed. Obtained extracts of GTE and GCE contained 26 and 41% of polyphenols, respectively, and the degree of polyphenol degradation during production of donuts was less when the dilution in dough was greater. Both tests indicated that the highest antioxidant activity had donuts with the highest analyzed addition of extract, however depending on the applied test or GTE or GCE had better antioxidant properties. Fatty acid composition was the most beneficial when the addition of GTE and GCE was on a level of 0.25 and 0.5 g·100 g^? 1, respectively. In fried donuts relatively low amounts of acrylamide were obtained, amounting to 18–46 μg·kg^? 1. Only the lowest addition of GTE and the highest addition of GCE caused an increase of acrylamide content in donuts, while all other levels of added extracts caused a decrease in the content of formed acrylamide.     

Streptococcus parauberis associated with modified atmosphere packaged broiler meat products and air samples from a poultry meat processing plant

Lactic acid bacteria (LAB) isolated from marinated or non-marinated, modified atmosphere packaged (MAP) broiler leg products and air samples of a large-scale broiler meat processing plant were identified and analyzed for their phenotypic properties. Previously, these strains had been found to be coccal LAB. However, the use of a 16 and 23S rRNA gene RFLP database had not resulted in species identification because none of the typically meat-associated LAB type strains had clustered together with these strains in the numerical analysis of the RFLP patterns. To establish the taxonomic position of these isolates, 16S rRNA gene sequence analysis, numerical analysis of ribopatterns, and DNA-DNA hybridization experiments were done. The 16S rRNA gene sequences of three isolates possessed the highest similarities (over 99%) with the sequence of S. parauberis type strain. However, in the numerical analysis of HindIII ribopatterns, the type strain did not cluster together with these isolates. Reassociation values between S. parauberis type or reference strain and the strains studied varied from 82 to 97%, confirming that these strains belong to S. parauberis. Unexpectedly, most of the broiler meat-originating strains studied for their phenotypical properties did not utilize lactose at all and the same strains fermented also galactose very weakly, properties considered atypical for S. parauberis. This is, to our knowledge, the first report of lactose negative S. parauberis strains and also the first report associating S. parauberis with broiler slaughter and meat products.     

Aflatoxins in nuts assayed by immunological methods

 Different kinds of raw and processed nuts available in the local retail market were investigated for aflatoxin content. Total aflatoxins and aflatoxin B₁ content were determined by immunoaffinity chromatography with fluorescence detection after reaction with bromine solution and by immunoenzymatic test kits. Of 29 investigated samples, 38% were contaminated. The total aflatoxin content in contaminated samples was between 1.20 μg/kg for peanuts and 5.50 μg/kg for walnuts. The concentration of aflatoxin B₁ found in contaminated samples was between 0.35 μg/kg for cashew nuts and 4.04 μg/kg for walnuts. The mean recovery of total aflatoxins was 95% for the Ridascreen test and 92% for immunoaffinity chromatography with fluorescence detection. For aflatoxin B₁ the mean recovery was 84%. Received: 4 March 1999 / Revised version: 17 May 1999     

Cost-Benefit Analysis of Dam Projects: The Perspectives of Resettled and Non-resettled Communities

The research focuses on the perception of the Mucharz reservoir in relation to costs and benefits for two types of communities. The primary aim of the paper is to compare the social impact of dam projects among both resettled and non-resettled local communities. The secondary aim of the paper is to test multivariate analysis of variance (MANOVA) as a tool to examine the social impact assessment (SIA) of dam projects. The studied dam is located on the Skawa River within the Polish Carpathians. We used in-depth interviews with a non-resettled (N?=?96) and resettled (N?=?57) local population. To analyse the collected data, we performed multivariate analysis of variance. The main results indicate that the social assessment of dam projects differs significantly depending on whether one belongs to the group of resettled or non-resettled population. MANOVA is an effective tool for the analysis of the social impact assessment (SIA) of dam projects.

     

Synthesis,Biological Evaluation of 1,1‐Diarylethylenes as a Novel Class of Antimitotic Agents

The cytotoxic activities of 23 new isocombretastatin A derivatives with modifications on the B‐ring were investigated. Several compounds exhibited excellent antiproliferative activity at nanomolar concentrations against a panel of human cancer cell lines. Compounds isoFCA‐4 ( 2 e ), isoCA‐4 ( 2 k ) and isoNH₂CA‐4 ( 2 s ) were the most cytotoxic, and strongly inhibited tubulin polymerization with IC₅₀ values of 4, 2 and 1.5 μM , respectively. These derivatives were found to be 10‐fold more active than phenstatin and colchicine with respect to growth inhibition but displayed similar activities as tubulin polymerization inhibitors. In addition, cell cycle arrest in the G₂/M phase and subsequent apoptosis was observed in three cancer cell lines when treated with these compounds. The disruptive effect of 2 e , 2 k and 2 s on the vessel‐like structures formed by human umbilical vein endothelial cells (HUVEC) suggest that these compounds may act as vascular disrupting agents. Both compounds 2 k and 2 s have the potential for further prodrug modification and development as vascular disrupting agents for treatment of solid tumors.     

Geochemical signature of contaminated sediment remobilization revealed by spatially resolved X-ray microanalysis of annual rings of Salix nigra

An X-ray microprobe was used to determine the concentration and distribution of Ni, U, and other metals within annual rings of willows (Salix nigra L.) from a former de facto radiological settling basin (Steed Pond; SP) and a depositional environment downstream (Tims Branch; TB) on the Savannah River Site (SRS). Geochemical and historical information about both areas are well documented. Following spillway breaches at SP in 1984 and the early 1990s, TB is inundated with contaminated sediments during storms. Bulk elemental composition of tree cores was determined using ICP-OES. Synchrotron X-rayfluorescence (SXRF) analysis showed that the metal contents of SP and TB cores were an order of magnitude higher than those from a reference site. TB cores were enriched with Ni in 1984 and 1991, corresponding with SP spillway breaches (containing 790 mg kg(-1) Ni in 1991). Cores from SP exhibited an extremely high Ni peak in 1996, approximately 5000 mg kg(-1), even though contaminant levels at SP did not change. The geochemical signature of contaminants recorded in TB annual rings reflected the significant sediment remobilization events consistent with the detailed history of the site, and at concentrations relative to their proximity to the source term. However, physiological processes occurring within impacted trees strongly influence the chronological accuracy of dendroanalysis and must be investigated further.     

DNA hybridization using surface plasmon-coupled emission

We describe a new approach to measuring DNA hybridization using surface plasmon-coupled emission (SPCE). Excited fluorophores are known to couple with surface oscillations of electrons in thin metal films, typically 50 nm thick silver on a glass prism. These surface plasmons then radiate into the glass at a sharply defined angle determined by the emission wavelength and the optical properties of the glass and metal. This radiation has the same spectral profile as the emission spectrum of the fluorophores. We studied the emission due to Cy3-labeled DNA oligomers bound to complementary unlabeled oligomers which were themselves bound to the metal surface. Hybridization resulted in SPCE due to Cy3-DNA into the prism. Directional SPCE was observed whether the sample was illuminated from the sample side or through the glass substrate at the surface plasmon angle for the excitation wavelength. A large fraction of the total potential emission is coupled to the surface plasmons resulting in improved sensitivity. When illuminated through the prism at the surface plasmon angle, the sensitivity is increased due to the enhanced intensity of the resonance evanescent field. It is known that SPCE depends on proximity to the silver surface. As a result, changes in emission intensity are observed due to fluorophore localization even if hybridization does not affect the quantum yield of the fluorophore. The use of SPCE resulted in suppression of interfering emission from a noncomplementary Cy5-DNA oligomers due to weaker coupling of the more distant fluorophores with the surface plasmons. We expect SPCE to have numerous applications to nucleic acid analysis and for the measurement of bioaffinity reactions.     

Photo‐induced Charge Transfer and Relaxation of Persistent Charge Carriers in Polymer/Nanocrystal Composites for Applications in Hybrid Solar Cells

The photo‐induced charge transfer and the dynamics of persistent charge carriers in blends of semiconducting polymers and nanocrystals are investigated. Regioregular poly(3‐hexylthiophene) (P3HT) is used as the electron donor material, while the acceptor moiety is established by CdSe nanocrystals (nc‐CdSe) prepared via colloidal synthesis. As a reference system, organic blends of P3HT and [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) are studied as well. The light‐induced charge transfer between P3HT and the acceptor materials is studied by photoluminescence (PL), photo‐induced absorption (PIA) and light‐induced electron spin resonance spectroscopy (LESR). Compared to neat P3HT samples, both systems show an intensified formation of polarons in the polymer upon photo‐excitation, pointing out successful separation of photogenerated charge carriers. Additionally, relaxation of the persistent charge carriers is investigated, and significant differences are found between the hybrid composite and the purely organic system. While relaxation, reflected in the transient signal decay of the polaron signal, is fast in the organic system, the hybrid blends exhibit long‐term persistence. The appearance of a second, slow recombination channel indicates the existence of deep trap states in the hybrid system, which leads to the capture of a large fraction of charge carriers. A change of polymer conformation due to the presence of nc‐CdSe is revealed by low temperature LESR measurements and microwave saturation techniques. The impact of the different recombination behavior on the photovoltaic efficiency of both systems is discussed.     

Sorption studies of heavy metal ions on pectin-nano-titanium dioxide composite adsorbent

The Cu(II), Cd(II), Zn(II), and Pb(II) sorption kinetics and equilibrium on hybrid material, composed of pectin and titanium dioxide nanopowder, were examined. Parameters, such as pH and adsorbent dose, were also investigated. The experimental data were better described by the Langmuir model. The maximum adsorption capacities were 1.37, 0.68, 0.51, and 0.83 mmol/g for Cu(II), Cd(II), Zn(II), and Pb(II), respectively. The introduction of nano-TiO₂ improved the kinetics of the metal ion sorption. The titanium dioxide, despite its small content (6%), contributes to the removal of the examined metal ions and eventually to the adsorption capacity of hybrid beads.