Impact of Preferential P-Diffusion Along the Grain Boundaries on Fine-Grained Polysilicon Solar Cells

Thin-film polysilicon solar cells are a promising low-cost alternative for bulk silicon solar cells due to their reduced material thickness. Recently, we showed that the use of an amorphous silicon/polycrystalline silicon heterojunction emitter instead of a diffused homojunction emitter led to a boost in the open-circuit voltage by 90 mV. Now, we present a full evidence that shows that this improvement is related to the absence of dopant smearing along the grain boundaries. By using scanning spreading resistance microscopy, we found an enlargement of the junction area by a factor of five in case of a homojunction. The tips of the dopant spikes represent lowly doped areas with an enhanced recombination.     

Run-to-run failure detection and diagnosis using neural networks and Dempster-Shafer theory: an application to excimer laser ablation

The formation of microvias in multilayer substrates is a critical factor in microelectronic packaging manufacturing. Such microstructures can be produced efficiently by excimer laser ablation. Thus, laser ablation systems are evolving to a level where the need to offset high capital equipment investment and lower equipment downtime are imminent. This paper presents a methodology for inline failure detection and diagnosis of the excimer laser ablation process. The methodology employs response data originating directly from the equipment and characterization of microvias formed by the ablation process. Neural network (NN) models are trained and validated based on this data to generate evidential belief for potential sources of deviations in the responses. Dempster-Shafer (D-S) theory is adopted for evidential reasoning. Successful failure detection is achieved in 100% of 19 possible failure scenarios. Moreover, successful failure diagnosis is also achieved with only a single false alarm occurring in the 19 failure scenarios.     

Thermal stability and high-temperature wear of Ti–TiN and TiN–CrN nanomultilayer coatings under self-mated conditions

Ti–TiN and TiN–CrN nanomultilayers were thermally stable retaining uniform and sharp layer interfaces up to 24 h at 773 K, without any oxidation or phase transformation accompanying each individual layer. Decreasing the multilayer spacing resulted in an increase in the hardness in both cases. The coating hardness was found to be independent of the substrate type, when applied on HS718, Ti64 and HCHCr substrates. In scratch testing, the multilayers displayed a better resistance to the onset of failure, as compared to the monolayer TiN. The substrate plasticity played an important role in determining the coating failure mode. Self-mated wear tests revealed the CrN–TiN system to exhibit the best wear behaviour, both at room temperature and at 773 K. The Ti–TiN coatings are more accommodative with all three substrates, as compared to TiN–CrN and TiN.     

Atomic force microscopic analysis of hydrogen peroxide bleached kraft northern black spruce fibres

Hydrogen peroxide is a potent, relatively inexpensive oxidant that chemically degrades chromophoric components in pulps and textiles. Oxidation of cellulose is a byproduct of this process step that decreases the tensile strength of individual fibres. The residence time of pulp in the bleaching reactor must be optimized to achieve the desired brightness and minimizing fibre degradation. To evaluate the impact of peroxide bleaching at the microfibrillar level, a single black spruce tree was chosen and kraft pulped. Peroxide bleaching was conducted via benchtop polyethylene bag bleaching in a temperature-controlled waterbath. Atomic force microscopy (AFM) topographical images acquired before and after the bleaching step show dramatic changes in fibre structure consistent with delignification and defects in the surface topography. This was further verified by X-ray work at Brookhaven National Laboratory, NY, U.S.A.     

An electrocoaters guide to selecting and maintaining rectifiers

Considering the critical contribution of your rectifier to the safe, effective, and reliable operation of your electrocoating process, the selection and maintenance of the optimum unit for your operation is time well spent.     

Detection of human papillomavirus gene sequences in laryngeal tumors and premalignant changes by polymerase chain reaction

Human papillomavirus gene sequences have been detected in a number of malignant and benign tumours. Non-oncogenic types 6 and 11 are etiological factors of benign mucosal tumours. Types 16 and 18 can be detected in malignancies most often but their role in the etiopathogenesis of cancers is still unclear. In our study we examined formalin-fixed and paraffin-embedded archive laryngeal tissues containing squamous cell carcinoma, papilloma and precancerous lesions for the presence of human papillomavirus genes. As a control we also examined tissues harbouring laryngeal nodules which represented the normal larynx in our study. After DNA preparation from the paraffin blocks we performed polymerase chain reaction to detect the DNA of human papillomavirus types 6, 11, 16 and 18. In the squamous cell carcinomas, papillomas and precancerous lesions the presence of human papillomavirus gene sequences was significantly higher than in the control group. To verify the integrity of DNA we also amplified a sequence deriving from the cellular beta-globin gene. Based on the 100% positivity for this gene we declare that the combination of our DNA preparation and polymerase chain reaction is a reliable method for detecting DNA sequences from formalin-fixed and paraffin-embedded tissues.     

Experimental determination of electron and hole mobilities in MOSaccumulation layers

This letter presents for the first time, the experimentally determined majority carrier mobilities in the accumulation layer of a MOSFET for both p-type and n-type channel doping for a wide range of doping concentrations. The measured carrier mobility is observed to follow a universal behavior at high transverse fields, similar to that observed for minority carriers in MOS inversion layers. At the higher doping levels, the effective mobility for majority carriers at low to moderate transverse fields is found to be very close to the bulk mobility. This is believed to be due to carrier screening of the ionized impurity scattering which dominates at the higher doping concentrations     

Computer-aided design and analysis of direct-driven wheel motordrive

This paper presents the computer-aided design (CAD) and performance analysis of a novel direct-driven wheel brushless DC motor drive for electric vehicles (EVs). The proposed motor is a permanent magnet square-wave motor, whose rotor with rare earth magnets forms the exterior of the motor, which can be fitted with a wheel tire to realize the direct drive for each wheel of an EV. The interior stator with its windings is rigidly mounted onto the suspension and frame structure of the vehicle. In order to achieve the direct drive without any mechanical transmission for EVs, the wheel motor has been designed as a low-speed high-torque motor. The design and optimization of the motor geometry was achieved with the aid of finite-element electromagnetic field analysis. Simulation studies on the transient performance of the motor drive were also carried out. This involved the creation of the motor transient model and formulation of a motor control strategy to ensure the wheel motor drive runs efficiently in the entire permitted speed and load range. The application of CAD techniques in the design of this very unconventional drive is described in this paper