CFD simulation of a chemical-looping fuel reactor utilizing solid fuel

A computational fluid dynamic (CFD) study has been carried out for the fuel reactor for a new type of combustion technology called chemical-looping combustion (CLC). CLC involves combustion of fuels by heterogeneous chemical reactions with an oxygen carrier, usually a granular metal oxide, exchanged between two reactors. There have been extensive experimental studies on CLC, however CFD simulations of this concept are quite limited. In the present paper we have developed a CFD model for the fuel reactor of a chemical-looping combustor described in the literature, which utilized a Fe-based carrier (ilmenite) and coal. An Eulerian multiphase continuum model was used to describe both the gas and solid phases, with detailed sub-models to account for fluid–particle and particle–particle interaction forces. Global reaction models of fuel and carrier chemistry were utilized. The transient results obtained from the simulations were compared with detailed experimental time-varying outlet species concentrations (Leion et al., 2008) and provided a reasonable match with the reported experimental data.     

Preparation and characterisation of a poly(acrylamidoglycolic acid-co-acrylamide) hydrogel for selective binding of Cu and application to diffusive gradients in thin films measurements

A poly(acrylamidoglycolic acid-co-acrylamide) [poly(AAGA-co-AAm)] hydrogel was prepared by copolymerising 2-acrylamidoglycolic acid (AAGA) with acrylamide (AAm). The copolymer hydrogel composition and structure was characterised by FTIR spectroscopy and elemental microanalysis and found to contain 3.5 AAGA monomer units for each AAm monomer unit. This was similar to the monomer ratios used in the synthesis. The metal ion binding properties of the hydrogel were characterised for a range of metal ions (Cu²⁺, Cd²⁺, K⁺, Na⁺, Mg²⁺ and Ca²⁺) under varying conditions of pH, ionic strength, metal concentration and time. The hydrogel was shown to bind Cu²⁺ and Cd²⁺ strongly under non-competitive binding conditions, with binding capacities of 5.3 and 5.1 μmol cm⁻², respectively. The binding capacity of each metal decreased, under competitive binding conditions (with a range of metal ions present at 17.8 μN), to 1.3 and 0.17 μmol cm⁻², respectively, indicating stronger selectivity for Cu²⁺. The metal ions were readily recovered (>94%) by eluting with 2 M nitric acid solution for 24 h. The binding capacities for Cu²⁺ and Cd²⁺ were also found to decrease with increasing ionic strength and at pH values <5. The copolymer was found to have an equilibrium swelling ratio (q_w) of over 500 at a maxima of pH 5.4 and at low ionic strengths. Finally, the copolymer hydrogel was tested as a binding phase with the diffusive gradients in thin films technique. A linear mass vs. time relationship was observed for Cu²⁺ in synthetic Windermere water with a recovery of approximately 100%.     

Chemical doping of single-wall carbon nanotubes

Single-wall carbon nanotubes can be doped, or intercalated, with electron donors or acceptors, similar to graphite and some conjugated polymers. The resulting materials show many of the same features: enhanced electrical conductivity, conduction electron paramagnetism, partial or complete reversibility, and cyclability. Reactions may be carried out in vapor or liquid phase, or electrochemically. Structural information is sketchy at best, due to the limited quality of currently available materials and solvent-related effects. Recent developments in coagulation-based fiber extrusion and partially aligned materials offer new opportunities for novel material modifications by chemical doping.     

Synthesis and structure-activity relationship of the isoindolinyl benzisoxazolpiperidines as potent,selective, and orally active human dopamine D4 receptor antagonists

A new class of potent dopamine D(4) antagonists was discovered with selectivity over dopamine D(2) and the alpha-1 adrenoceptor. The lead compound was discovered by screening our compound collection. The structure-activity relationships of substituted isoindoline rings and the chirality about the hydroxymethyl side chain were explored. The isoindoline analogues showed modest differences in potency and selectivity. The S enantiomer proved to be the more potent enantiomer at the D(4) receptor. Several analogues with greater than 100-fold selectivity for D(4) over D(2) and the alpha-1 adrenoreceptor were discovered. Several selective analogues were active in vivo upon oral or intraperitoneal administration. A chiral synthesis starting from either D- or L-O-benzylserine is also described.     

Thermal [1,3] carbon sigmatropic rearrangements of vinylcyclobutanes

Stereochemical, kinetic, and theory-based studies of the [1,3] carbon sigmatropic rearrangements of bicyclo[2.1.1]hex-2-enes, bicyclo[3.2.0]hept-2-enes, and monocyclic vinylcyclobutanes support the judgment that such reactions involve transient diradical structures traversing relatively flat potential energy surfaces.     

Prediction of the Crevice Corrosion Incubation Period of Passive Metals at Elevated Temperatures: Part I — Mathematical Model

Previous researchers have numerically modelled the crevice corrosion of particular classes of metals and alloys. Applicable to passive metals immersed in an appropriate electrolyte, a new crevice corrosion model simulates the general passive crevice corrosion problem. Rapid approach of chemical equilibrium is assumed. Equilibrium constants and transport properties are adjusted for elevated temperature via the correspondence principle (Criss and Cobble, 1964) and the Nernst‐Einstein equation, respectively. The corrosion rate is adjusted for thermal and acidity effects via an Arrhenius expression and a Freundlich isotherm, respectively. Presented in a sequel publication, the predictions compare favourably with experimental results.     

Formation of hydrophilic starch coatings on polyethylene films

Thin starch coatings were deposited onto polyethylene (PE) film surfaces when PE films were immersed in 1% jet cooked starch solutions and the hot solutions were allowed to cool. Normal cornstarch, waxy cornstarch, high amylose cornstarch, and solvent‐extracted normal cornstarch (to remove native lipid) were used in these experiments. Amounts of adsorbed starch varied from about 0.03–0.05 mg per cm² of PE, and these starch coatings imparted hydrophilic properties to film surfaces, as evidenced by contact angle measurements. Although starch could be removed by gently rubbing water‐wet PE surfaces, air‐dried coatings were more firmly attached, and did not separate from the PE surface when films were bent or flexed. SEM images of starch‐coated film surfaces showed that starch was deposited as particles less than 1 μm in diameter, and also as aggregates of these submicron particles. Despite the fact that some starch samples contained only very small amounts of amylose and native lipid, surface‐deposited starch in all experiments contained 90–100% amylose; and exhibited the same V_h X‐ray diffraction pattern, indicative of helical inclusion complex formation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1781–1788, 2002; DOI 10.1002/app.10589     

The effect of stoichiometry on the fracture toughness of a liquid crystalline epoxy

The fracture toughness of a liquid crystalline epoxy was compared with that of a standard bisphenol‐A based epoxy to understand how both the liquid crystalline structure and the crosslink density affect fracture toughness. For the liquid crystalline epoxy, the liquid crystalline domain size decreased with increasing temperature of cure and away from the stoichiometric formulation. Quantitative fractography showed that there is a competition between the liquid crystalline domain structure and the stoichiometry in determining the fracture toughness. At some cure conditions the effect of the domains is dominant. When the cure conditions are adjusted to reduce the domain size, the domains become too small to affect the fracture toughness, and thus the effect of the stoichiometry is dominant. The result is that the formation of liquid crystalline structure only increases the fracture toughness relative to that of a traditional epoxy at and near the stoichiometric formulation.     

Transient measurements of adsorption and diffusion in H-ZSM-5 membranes

A transient permeation method presented here not only determines the adsorption and diffusion properties of the pores that are the transport pathways through zeolite membranes, but nondestructively estimates the effective thickness of the membrane. Transient responses of the permeate concentration to step changes in the feed were measured on two H-ZSM-5 tubular membranes and modeled assuming Maxwell-Stefan diffusion and Langmuir adsorption. The adsorption isotherms determined from these transient measurements at 298 K of N₂ and CO₂ were nearly identical to those measured by calorimetry on H-ZSM-5 powders. The CH₄ isotherm at 298 K was similar to isotherms measured by calorimetry and gravimetric techniques on Na-ZSM-5 and silicalite powders. The similarity of the isotherms indicates that transport of these light gases occurs mainly through zeolite pores. The Maxwell-Stefan diffusion coefficients D_MS depended on concentration and were higher for higher feed partial pressures. Average D_MS values for the two membranes were 7.5, 5 and 1.5×10⁻¹⁰ m²/s for N₂, CH₄, and CO₂, respectively; these are in the same range and order as diffusion coefficients measured in zeolite crystals.     

A discussion of the review paper “Sulphate attack research—whither now?” by M. Santhanam, M.D. Cohen, and J. Olek

The review paper produced by Drs. Santhanam, Cohen, and Olek [Cem. Concr. Res. 31 (2001) 845.] is a thoughtful attempt to look at the current sulphate attack situation from the North American viewpoint. The review gives suggestions about what needs to be done to obtain more information about precisely how sulphate attack takes place in different situations. Also discussed is how test procedures may need to be modified to give data that are more representative of field situations, and the need for better modelling systems for sulphate attack. However, there are numerous points concerning the current situation that also need to be addressed in order to ascertain more clearly exactly what is taking place. These are discussed briefly below.