Sintering TiO2 in HCl Atmospheres

TiO₂ was sintered in HCl atmospheres to enhance the effects of vapor transport. Little or no densification is observed for temperatures between 1000° and 1300°C. Particle coarsening occurs at temperatures above 1200°C. The apparent activation energy for particle growth is 114 kJ/mol. It is concluded that the primary mass-transport mechanism is vapor transport while the particle growth rate is limited by grain-boundary mobility .     

Velocity and temperature profiles in compressible turbulent wall jets

The results of an experimental study on compressible turbulent wall jets resulting from a normally impinging round jet are presented. A finite difference technique was used for the calculation of velocity and temperature profiles. The eddy transfer coefficients used were functions of the distance from the plate throughout the flow field of the wall jet. The nozzle exit Mach number ranged up to 0.85. The nozzle exit temperature to the ambient temperature ratio ranged up to 2.92. The applicability of the calculational method has been thoroughly checked for a region of flow extending up to 12 nozzle diameters from the axis of symmetry. Using the empirical eddy transfer coefficients presented in this paper only starting profiles are needed to generate the solution for any point in the wall jet flow field which is described by a system of parabolic (boundary layer) equations.     

A vapor collection and thermal desorption method to measure semiochemical release rates from controlled release formulations

Chemicals (bp 270–490 °C/1 atm) evaporated from a controlled-release formulation dispenser were carried by an airflow to a collector packed with a polymeric adsorbent. After a set time, the chemicals were recovered by thermally desorbing them onto a gas-liquid chromatograpic column. They were then separated and quantified. The apparatus is described, and the requirements for its successful use are discussed. The soundness of the thermal desorption technique was confirmed by comparison with another technique: solvent elution from the collector. The advantages of the former technique are discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement of that product by the USDA.     

Apparatus and procedure for measuring release rates from formulations of lepidopteran semiochemicals

An apparatus was developed wherein a vacuum source was used to pull air across a controlled-release-formulation dispenser or a planchet containing a known quantity of a semiochemical and into a collector filled with a polymeric adsorbent. After a set time, the semiochemical was eluted with solvent and was quantified by gas-liquid chromatography (GLC). High percentages of known quantities of the lepidopteran semiochemicals (Z)-7-dodecen-l -ol acetate (Z7DDA), boiling point (bp) 275 ° C/1 atm, (Z)-9-tetradecen-1-ol formate (Z9TDF), bp 289 °C/1 atm, and (Z,Z)-3,13-octadecadien-1-ol acetate (ZZODDA), bp 490 °C/1 atm, were recovered. The semiochemicals did not oxidize and were recovered quantitatively from the adsorbent. The release rates of Z9TDF from a controlled-release dispenser were found to be directly proportional to the airflow rates. Release rate measurements on the Z9TDF dispensers were made for the purpose of estimating the method's precision. The method was shown to give internally consistent results by measurements on another Z9TDF formulation. The accuracy of the method is discussed.Mention of a commercial or proprietary product in this paper does not constitute an endorsement by the USDA.     

Pyrolysis–molecular weight chromatography–vapor-phase infrared spectrophotometry: An on-line system for analysis of polymers. IV. Influence of cis/trans ratio on the thermal degradation of 1,4-polybutadienes

The influence of the cis/trans ratio of 1,4-polybutadienes on the volatile products formed during temperature-programmed thermal degradation to 15% weight loss has been investigated using a mass chromatograph (a gas chromatograph which directly provides mass numbers of resolved components of a mixture) and an “on the fly” vapor-phase infrared spectrophotometer. In order of amounts, major volatile products were 4-vinyl-1-cyclohexene (dimer), 1,3-butadiene (monomer), cyclopentene, and 1,3-cyclohexadiene. With increasing trans content, the relative quantities of 4-vinyl-1-cyclohexene decreased strongly, cyclopentene increased strongly, 1,3-butadiene decreased moderately, and 1,3-cyclohexadiene increased moderately. For a high-trans polybutadiene, increasing the heating rate produced relatively more monomer and dimer but less cyclopentene. Mass chromatograms from 1,4-polybutadienes which had been heated to 15% weight loss in their prehistory were similar to those obtained from 1,2-polybutadiene, indicating that 1,4-polybutadiene undergoes isomerization prior to degradation. Mechanisms for the formation of the main volatile products of decomposition are discussed.     

Solvation of ions—XX. The ferrocene—ferricinium couple and its role in the estimation of free energies of transfer of single ions

The ferrocene-ferricinium electrode (Pt/Foc, Fic⁺) was investigated in water, acetonitrile, ethanol, DMSO and DMF using single scan cyclic voltammetry and phase sensitive ac polarography. The oxidation-reduction is pseudo-reversible in all five solvents with an electrochemical rate constant of approximately 10⁻² cm/s. In all solvents a slow irreversible chemical step involving the ferricinium cation follows electron transfer, so that slow cyclic voltammetry or polarography rather than potentiometry is preferred if ferrocene is to be used as a reference electrode in non-aqueous solvents.

The Strehlow assumption, ΔG_tr(Foc) = ΔG_tr(Fic⁺ gives very different free energies of transfer of single ions from non-aqueous solvents to water when compared with the TATB assumption that ΔG_tr(Ph₄As⁺) = ΔG_tr(Ph₄B⁻). This discrepancy is likely to be because ferricinium is only a moderately large cation, so that ΔG_tr(Fic⁺) is less positive than ΔG_tr(Foc) for transfer to water. The discrepancy is not because of abnormal electrochemical behavior of the Pt/Foc, Fic⁺ electrode in water or other solvents. Values of E° vs nhe, H₂O in a variety of solvents based on the TATB assumption are presented.     

Mechanical properties and transition temperatures of copolymers of N-n-alkylacrylamides and vinylidene chloride

Mechanical and solution properties, melting transitions, torsional stiffness temperatures, T_f, and selected modulus-temperature curves are presented for copolymers of the N-n-alkylacrylamides with vinylidene chloride. Copolymers were prepared at 60°C across the range of compositions, using as comonomers N-n-butyl-, octyl-, dodecyl- and oleyl-acrylamide, which have amorphous side-chains, and N-n-octadecyl acrylamide and n-octadecyl acrylate whose side-chains are crystalline. The mechanical properties reflected the effect of the decline in backbone crystallinity and the simultaneous development of strong intermolecular interactions in the amorphous stage. Copolymers were stiff or showed brittle failure across the compositional range except when intermolecular forces were reduced (with n-octadrcyl acrylate) and side-chain crystallization eliminated (with N-oleylacrylamide). These systems and the n-dodecylacrylamide copolymers had yield strengths less than brittle strengths and substantial elongations. Backbone crystallinity was eliminated at about 15 mole % amide and side-chain crystallinity vanished at less than 10 mole % of the amide in the N-n-octadecylacrylamide series. No depression in side-chain melting point occurred with dilution by segments of vinylidene chloride. Over-all decline in the flex-temperature was the normal monotonic function of composition except that values increased in magnitude at high vinylidene chloride contents, the effect presumably being caused by the presence of crystallinity. An empirical equation was developed which permitted the calculation of T_f for any N-n-alkylacrylamide composition with any number of carbon atoms in the side-chain, above 3.     

Development of optical anisotropy in vitrains during carbonization

The purpose of this work was to examine the possible significance in the formation of metallurgical coke of the anisotropic spherical mesophase exemplified by that found during the carbonization of pitch-like materials, and to ascertain if the various types of optical anisotropy found in coke could form a basis for the characterization of cokes produced from different coals. Vitrains from a wide range of coals were carbonized at temperatures from 370 to 1000 °C and the types and amounts of optical anisotropy in the resulting semi-cokes and cokes were determined from microscopic examination, the anisotropic components being classified according to grain size of the granular mosaics and appearance. The anisotropy developed directly from the isotropic phase, appearing initially as a fine-grained mosaic. With increasing carbonization temperature, this fine-grained mosaic was transformed into progressively coarser-grained anisotropy, the extent of this transformation depending on the rank of the vitrain. It is therefore concluded that the formation, growth and coalescence of anisotropic spherical bodies, such as occurs during the carbonization of pitch, is not a necessary precursor of the mosaic anisotropy in coke. The type and amount of anisotropy developed provide a quantitative means of characterising different cokes.