2 cm long monolithic multisection laser for active modelocking at 2.2 GHz

A 2 cm long three-contact multisection laser has been fabricated for modelocking at very low repetition rates. Active modelocking yields 8.0-12.3 ps pulses at 2.2, 4.3 and 6.5 GHz corresponding to the fundamental, first, and second harmonics of the cavity resonance frequency. This device demonstrates the feasibility of fabricating monolithic pulse sources operating at rates as low as the OC-48 Sonet transmission rate (2.488 Gbit/s).<>     

A nonlinear operator-based speech feature analysis method withapplication to vocal fold pathology assessment

Traditional speech processing methods for laryngeal pathology assessment assume linear speech production with measures derived from an estimated glottal flow waveform. They normally require the speaker to achieve complete glottal closure, which for many vocal fold pathologies cannot be accomplished. To address this issue, a nonlinear signal processing approach is proposed which does not require direct glottal flow waveform estimation. This technique is motivated by earlier studies of airflow characterization for human speech production. The proposed nonlinear approach employs a differential Teager energy operator and the energy separation algorithm to obtain formant AM and FM modulations from filtered speech recordings. A new speech measure is proposed based on parameterization of the autocorrelation envelope of the AM response. This approach is shown to achieve impressive detection performance for a set of muscular tension dysphonias. Unlike flow characterization using numerical solutions of Navier-Stokes equations, this method is extremely computationally attractive, requiring only a small time window of speech samples. The new noninvasive method shows that a fast, effective digital speech processing technique can be developed for vocal fold pathology assessment without the need for direct glottal flow estimation or complete glottal closure by the speaker. The proposed method also confirms that alternative nonlinear methods can begin to address the limitations of previous linear approaches for speech pathology assessment     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

Correlated response of udder dimensions to selection for milk yield in Holsteins

Response to selection for milk yield in Holsteins was examined by a controlled selection experiment initiated in 1964. Foundation cows were paired by sire and divided randomly into two breeding groups, selection and control. Selection group was mated to four sires each year highest for Predicted Difference milk. Twenty bulls selected in 1964 as near breed average for milk sired all control cows. Milk yield was recorded for each lactation, and height of udder from ground, distances between teats, and perimeter and area bound by the four teats were measured at 30 to 75 days postpartum on 153 selection and 202 control cows over 14 yr. Most estimates of repeatability and heritability of udder dimensions before and after milking were .45 or larger. Correlations with milk yield were negative for udder height and positive for other udder measurements. Selection cows exceeded controls for lactational milk yield. Daughters of high milk bulls had greater distances between teats, greater perimeters, and larger areas of udder floor. Selection cows did not differ from controls in udder height for first parity but were below controls in udder height and had udders that collapsed more for all parities.     

Long-term prognosis for women with chronic pelvic pain without laparoscopically demonstrable cause

With the object of assessing the long-term prognosis and the frequencies of recurrence and remission in women chronic low abdominal pain without laparoscopically visible cause, questionnaire were sent in 1985 and 1991 to 55 women who had been submitted to laparoscopy in 1982-1984 for this reason. These women had been told that there was no demonstrable explanation of the pain experienced and were then discharged. 65% and 55% respectively had experienced and unfavourable course with considerable and continued symptoms. Only 22% stated in both investigations that they had experienced a favourable course and that they were, by and large, free from pain. 36% changed from an unfavourable to a favourable course or the reverse. The assessment made by the women was confirmed by a series of subordinate questions and this demonstrated a marked difference between the favourable and unfavourable courses of the condition. It is concluded that laparoscopy with exclusion of significant pathology is not, in itself, satisfactory as treatment of this patient group and that no improvement occurs in the course of time. The condition varies greatly with many recurrences and remissions and, for this reason, uncontrolled reports of the therapeutic effects are of no significance. When compared with the literature, it is suggested that this patient group should be referred early in the course of the condition to a therapist with specialist psychological/sexological insight and/or to a physiotherapist with interest in this patient group.     

Preparation of Phase-Pure M1 MoVTeNb Oxide Catalysts by Hydrothermal Synthesis—Influence of Reaction Parameters on Structure and Morphology

This work presents a detailed investigation of the preparation of MoVTeNbO _x catalysts by hydrothermal synthesis. Phase-pure synthesis of M1 has been achieved applying the metals in a molar ratio Mo/V/Te/Nb = 1/0.25/0.23/0.12. Raman, UV/Vis spectroscopy, and SEM/EDX analysis show that the elements are inhomogeneously distributed in the initial suspension that is formed after mixing the metal salts in an aqueous medium. Iso- and heteropoly anions of molybdenum, free telluric acid as well as supra-molecular polyoxometalate clusters are observed in the solution, whereas all metals have been found in the precipitate. Complete rearrangement of molecular building blocks under hydrothermal conditions is essential for formation of phase-pure materials. Optimized synthesis conditions with respect to temperature and time result in the formation of a precursor consisting of nano-structured M1 characterized by an extended periodic organization in the [001] direction and a fairly homogeneous distribution of the elements. Residual ammonium containing supra-molecular species in the precursor result in the formation of phase mixtures during the subsequent crystallization by heat treatment in inert gas. Phase-pure M1 exhibits a distinct degree of flexibility with respect to the chemical composition that becomes obvious by incorporating Nb not exclusively into pentagonal bi-pyramidal units, but also into octahedral coordinated positions as shown by EXAFS. Anisotropic growth of the needle-like M1 crystals has been observed during the final heat treatment performed at 873–923 K in inert atmosphere disclosing a potential method to control the catalytic properties of MoVTeNbO _x catalysts.     

A semiautomated electron backscatter diffraction technique for extracting reliable twin statistics

A framework has been developed for extracting reliable twin statistics from a deformed microstructure using crystallographic twin identification techniques with spatially correlated electron backscatter diffraction (EBSD) data. The key features of this analysis are the use of the mathematical definition of twin relationships, the inclination of the common K ₁ plane at a twin boundary, and the correct identification of the parent orientation in a parent/twin pair. Methods for identifying the parent in a parent/twin pair will be briefly discussed and compared. Twin area fractions are then categorized by operative twin systems, number of active twin variants in each system, and corrected twin widths. These statistics are reported here for α-zirconium samples deformed in quasi-static four-point bend beams and in a 100 m/s Taylor cylinder impact test. Analysis of the statistics also begins to reveal the roles that deformation rate and relative orientation of the boundary conditions to the material’s symmetry axes play in determining the twinning activity that accommodates the imposed boundary conditions. These improved twin statistics can help quantify the deformation processes in materials that deform by twinning as well as serve to provide better validation of proposed models of the deformation processes.     

Epididymo-orchitis and Reiter''s disease. Two infrequent complications after intravesical bacillus Calmette-Guérin therapy

Two cases of adverse reactions to intravesical treatment with bacillus Calmette-Guérin are reported. The first patient presented with a severe suppurating epididymo-orchitis three months after his last treatment. The second patient developed Reiter's disease with arthritis of one knee and conjunctivitis 1 week after the fourth instillation.