Deep 3D X-ray Lithography Based on High-Contrast Resist Layers

Technical Physics Letters - In classical X-ray lithography, the mask and resist layer are arranged perpendicular to the incident X-ray beam. Being absorbed in the resist layer, the X-ray beam...     

Characterization of Ceramic Foam Filters Used for Liquid Metal Filtration

In the current study, the morphology including tortuosity, and the permeability of 50-mm thick commercially available 30, 40, 50, and 80 pores per inch (PPI) alumina ceramic foam filters (CFFs) have been investigated. Measurements have been taken of cell (pore), window, and strut sizes, porosity, tortuosity, and liquid permeability. Water velocities from ~0.015 to 0.77 m/s have been used to derive both first-order (Darcy) and second-order (Non-Darcy) terms for being used with the Forchheimer equation. Measurements were made using 49-mm “straight through” and 101-mm diameter “expanding flow field” designs. Results from the two designs are compared with calculations made using COMSOL 4.2a^® 2D axial symmetric finite element modeling (FEM), as a function of velocity and filter PPI. Permeability results are correlated using directly measurable parameters and compared with the previously published results. Development of improved wall sealing (49 mm) and elimination of wall effects (101 mm) have led to a high level of agreement between experimental, analytic, and FEM methods (±0 to 7 pct on predicted pressure drop) for both types of experiments. Tortuosity has been determined by two inductive methods, one using cold-solidified samples at 60 kHz and the other using liquid metal at 50 Hz, giving comparable results.     

Testing of starch-based carbohydrate polymer coatings for enhanced urea performance

In this study, starch–urea–borate adhesives were developed for coating the slow release urea. The physical properties of the developed adhesives were studied as a function of temperature, heating time, stirring rate, and pH. It was found that for certain specific adhesive composition, pH and stirring rate, the complete gelatinization time and corresponding adhesive viscosity do not remain constant with temperature. The suspension heated at 75°C reached its maximum viscosity after 21 min of heating, thereafter, remained constant over time. In contrast, the suspension heated at 80°C reached its peak viscosity after 12 min of heating. Further heating after 12 min caused a steady decrease in viscosity from its peak value of 450–339 cP. Once the adhesive physical properties were completely understood, a dripping solution technique was used to coat the urea granules with coating thickness ranging from 0.15 to 0.7 mm. It was noticed that the overall nutrients release time of the coated urea was three times higher than the uncoated urea. It was also concluded that the mechanical strength of coated urea strongly depends on the adhesive composition and coating thickness.     

Misinformed About the Affordable Care Act? Leveraging Certainty to Assess the Prevalence of Misperceptions

According to some recent research, Americans hold a great deal of misinformation about important political issues. However, such investigations treat incorrect answers to quiz questions measuring knowledge as evidence of misinformation. This study instead defines misperceptions as incorrect answers that respondents are confident are correct. Two surveys of representative samples of American adults on the Affordable Care Act reveal that most people were uncertain about the provisions in the law. Confidently held incorrect beliefs were far less common than incorrect answers. Misperceptions were most prevalent on aspects of the law on which elites prominently and persistently made incorrect claims. Furthermore, although Americans appear to have learned about the law between 2010 and 2012, misperceptions on many provisions of the law persisted.     

Design of a double microprocessor‐based on‐line process control system

Abstract

A numerical technique for integrating the full Navier‐Stokes and diffusion equations through an initial value problem has been used to investigate the time development of a line buoyant source issuing in a density‐stratified environment. The basic physical features and some structures of the interactions of the motion at the intermediate mixing region are obtained. Results show that the stratification tends to inhibit the flow development of the buoyant source and to encourage the formation of a recirculatory vortex on the lower region near the source and the upper region.     

Characterizing cerebral oxygen metabolism employing oxygen-17 MRI/MRS at high fields

This article provides a comprehensive overview of oxygen (¹⁷O) magnetic resonance spectroscopy and imaging, including the advantages and challenges offered by the different methods developed thus far. The physiological role and relevance of oxygen, and its participation in aerobic metabolism, are addressed to emphasize the importance of the investigations and the efforts related to these developments. Furthermore, a number of methods employed in the determination of the cerebral metabolic rate of oxygen in neural cells will be presented, focusing primarily on methodologies enabling absolute quantification.