Effect of crude oil ageing on low salinity and low salinity surfactant flooding

Injection of brine with lower salinity than the connate brine has proven to give a moderate increase in oil recovery in sandstones. Recent research has shown that this process will significantly benefit from introducing surfactant optimised for low salinity environment.The mechanisms underlying increased recovery by low salinity brine injection are not yet fully understood. However, research to date suggests that they are related to complex crude oil/brine/rock interactions. With this in mind, the present paper investigates primarily how the extent of oil recovery from Berea sandstones subjected to long term exposure of crude oil is influenced by (1) low salinity water injection and (2) combined process low salinity water injection with surfactant flooding.Core displacement tests were conducted on four Berea cores (30 cm), two in a natural state and two that had been subject to extensive crude oil ageing at high temperature. Results obtained from different flooding steps are discussed in terms of oil recovery and effluent properties including turbidity, pH- and ion analysis (Na⁺, Mg²⁺, Ca²⁺). The results effectively illustrate that oil recoveries from the aged cores are higher during both low salinity water injection and low salinity water injection combined with surfactant flooding. An assessment of how tertiary oil recovery in aged and unaged cores varies with surfactant concentration is also presented.Effluent ion analysis from low salinity water floods showed that Mg²⁺ ions were strongly retained in the aged core while Ca²⁺ ions were being produced from both aged and unaged cores. The latter was attributed mainly to calcite dissolution. Results obtained from pressure profiles, effluent ion analysis and turbidity tests suggest higher production and elution of fine particles from the unaged core.     

无线技术拓展过程控制的视野

使用新型的无线技术，能够方便快捷地采集和传递以往难以访问的现场数据，这无疑为现代过程控制领域打开了一个视野更为开阔的窗口。     

The Limitations of Public Housing: Relocation Choices in a Working-Class Community

Public housing is regarded as a map resource for rehousing families displaced by the urban renewal and highway programs. Yet a study of some 500 families relocated from Boston's West End reveals that the overwhelming majority refused to consider the possibility of living in a housing project, for reasons consistent with their preference for the residential patterns and life-styles prevalent in their former neighborhood. Those who do relocate in projects are not typical of the stable working class, and most frequently are characterized by some personal situation that limits their rehousing choice. Planners are confronted with the alternative of allowing public housing to become a care-taking institution for the disabled elements of the society, or of creating new forms for the public housing subsidy to encourage mobility, to provide satisfactory living environments consistent with the values of the inhabitants, and to permit the kinds of heterogeneity which prevail in existing neighborhoods.     

Micromechanical modeling of grain boundary resistance to cleavage crack propagation in ferritic steels

In ferritic steels a propagating cleavage microcrack changes its propagation direction as it advances from grain to grain. This is due to differences in the orientation of the cleavage planes of two neighboring grains. In order to reach a cleavage plane in a new grain, a microcrack must first penetrate the grain boundary. Grain boundaries therefore act as natural barriers in cleavage fracture. The influence of a grain boundary and the associated misorientation in cleavage planes on crack arrest is here examined using a 3D finite element model with axisymmetric periodicity, representing two grains whose cleavage planes are tilted and twisted relative to each other. The temperature dependent mechanical properties of ferrite are modeled using a temperature dependent viscoplastic response. The development of the crack front as the microcrack penetrates through a grain boundary is here presented. The influence of the twist misorientation on the critical grain size, defined as the largest grain size that can arrest a rapidly propagating microcrack, is examined in a temperature range corresponding to the ductile to brittle transition (DBT) region. It is shown that when both tilt and twist misorientation are present, the influence of tilt and twist, respectively, on crack growth resistance can be decoupled.     

Wideband Low‐Reflection Transmission Lines for Bare Chip on Multilayer PCB

The pad pitch of modern radio frequency integrated circuits is in the order of few tens of micrometers. Connecting a large number of high‐speed I/Os to the outside world with good signal fidelity at low cost is an extremely challenging task. To cope with this requirement, we need reflection‐free transmission lines from an on‐chip pad to on‐board SMA connectors. Such a transmission line is very hard to design due to the difference in on‐chip and on‐board feature size and the requirement for extremely large bandwidth. In this paper, we propose the use of narrow tracks close to chip and wide tracks away from the chip. This narrow‐to‐wide transition in width results in impedance discontinuity. A step change in substrate thickness is utilized to cancel the effect of the width discontinuity, thus achieving a reflection‐free microstrip. To verify the concept, several microstrips were designed on multilayer FR4 PCB without any additional manufacturing steps. The TDR measurements reveal that the impedance variation is less than 3 Ω for a 50 Ω microstrip and S11 better than –9 dB for the frequency range 1 GHz to 6 GHz when the width changes from 165 µm to 940 µm, and substrate thickness changes from 100 µm to 500 µm.     

Comment on “Neighborhood Revitalization and Displacement: A Review of the Evidence”

The issue of neighborhood revitalization and displacement certainly does have a déjà vu quality to it. While government officials, academic housing analysts, and even neighborhood groups seem to approach the problem as if it were a brand new phenomenon, in reality the recent history of displacement under urban renewal, the interstate highway system, and other government programs is very relevant. What is remarkable in the spate of literature that recently has emerged on the issue—of which Sumka's article is quite representative—is the failure to acknowledge that history and the lessons it might offer.     

Synthesis and polymerization of alkyl halide-functional cyclic carbonates

To increase the diversity in functional aliphatic polycarbonates, a series of novel chloro- and bromo-functional six-membered cyclic carbonate monomers were synthesized. Despite asymmetry in the monomer functionalities, homopolymerization of the monomers afforded semicrystalline polycarbonates with a high tendency to crystallize from the melt and/or on precipitation from a THF solution. Melting points were found in the 90-105 °C or 120-155 °C range for polymers comprising methyl or ethyl moieties, respectively, in the backbone. The monomers were further copolymerized with trimethylene carbonate to form random copolymers. Even among some of these random copolymers elements of semicrystallinity were found as confirmed by melting endotherms in DSC. The results clearly show that the incorporation of alkyl halide functionalities in aliphatic polycarbonates may lead to materials with a high ability to form crystallites, even in random copolymers, likely driven by polar interactions due to the presence of the halide functionalities.