Characterization of Chemically and Thermally Treated Oil‐in‐Water Heteroaggregates and Comparison to Conventional Emulsions

Heteroaggregated oil‐in‐water (O/W) emulsions formed by targeted combination of oppositely charged emulsion droplets were proposed to be used for the modulation of physical properties of food systems, ideally achieving the formation of a particulate 3‐dimensional network at comparably low‐fat content. In this study, rheological properties of Quillaja saponins (QS), sugar beet pectin (SBP), and whey protein isolate (WPI) stabilized conventional and heteroaggregated O/W emulsions at oil contents of 10% to 60% (w/w) were investigated. Selected systems having an oil content of 30% (w/w) and different particle sizes (d₄₃ ≤ 1.1 or ≥16.7 μm) were additionally subjected to chemical (genipin or glutaraldehyde) and thermal treatments, aiming to increase network stability. Subsequently, their rheological properties and stability were assessed. Yield stresses (τ₀) of both conventional and heteroaggregated O/W emulsions were found to depend on emulsifier type, oil content, and initial droplet size. For conventional emulsions, high yield stresses were only observed for SBP‐based emulsions (τ₀,_SBP approximately 157 Pa). Highest yield stresses of heteroaggregates were observed when using small droplets stabilized by SBP/WPI (approximately 15.4 Pa), being higher than those of QS/WPI (approximately 1.6 Pa). Subsequent treatments led to significant alterations in rheological properties for SBP/WPI systems, with yield stresses increasing 29‐fold (glutaraldehyde) and 2‐fold (thermal treatment) compared to untreated heteroaggregates, thereby surpassing yield stresses of similarly treated conventional SBP emulsions. Genipin‐driven treatments proved to be ineffective. Results should be of interest to food manufacturers wishing to design viscoelastic food emulsion based systems at lower oil droplet contents.     

Metal Oxide Nanowires for Gas Sensor Applications

We report on the synthesis of SnO₂ and CuO nanowires and their application as gas sensing components. The fabrication of SnO₂ and CuO single nanowire devices by optical and electron beam lithography is described, and sensing performance to the toxic gas carbon monoxide is demonstrated. We briefly present the development of CMOS fabricated micro-hotplates as platforms for gas sensors and show our approach for nanowire implementation. Finally, we demonstrate a fully CMOS integrated CuO multi nanowire device and present our roadmap for a fully integrated multi-parameter smart sensor device which could be implemented as safety feature in smart phones.     

Stevia – Ein natürliches Sü?ungsmittel mit gesundheitlichem Zusatznutzen?

Eine Besonderheit der natürlichen Sü?stoffe aus Stevia rebaudiana soll ihre vorteilhafte pharmakologische Wirkung sein. In der wissenschaftlichen Literatur wird immer wieder ein Einfluss auf den menschlichen Blutzuckergehalt und den Blutdruck genannt. Dies w?re ein Novum: Ein Sü?ungsmittel mit Heilwirkung.     

Kinetic modeling of Fe‐BEA as NH3‐SCR catalyst—effect of phosphorous

The focus of this work is to investigate whether a previously developed microkinetic deactivation model for hydrothermally treated Fe‐BEA as NH₃‐SCR catalyst can be applied to describe chemical deactivation of Fe‐BEA due to phosphorous exposure. The model describes the experiments well for Fe‐BEA before and after phosphorous exposure by decreasing the site density, representing deactivation of sites due to formation of metaphosphates blocking the active iron sites, while the kinetic parameters are kept constant. Furthermore, the results show that the activity for low‐temperature selective catalytic reduction (SCR) is very sensitive to loss of active monomeric iron species due to phosphorous poisoning compared to high‐temperature SCR. Finally, the ammonia inhibition simulations show that exposure to phosphorous may affect the internal transport of ammonia between ammonia storage sites buffering the active iron sites, which results in a lower SCR performance during transient conditions. © 2014 American Institute of Chemical Engineers AIChE J, 61: 215–223, 2015     

Behavior of internal stakeholders in project portfolio management and its impact on success

Stakeholder behavior and stakeholder management are key success factors within project portfolio management (PPM). This empirical study of 197 project portfolios investigates the effect of the intensity of engagement (IoE) of portfolio-internal stakeholders on project portfolio success. We show that the effect of stakeholders is phase-specific and that role clarity as a measure of PPM maturity affects the nature of the relationship between the IoE of stakeholders and portfolio success. The effects of the IoE of senior managers on success are not clearly positive with regard to strategic portfolio structuring and are even negative in operative portfolio steering in established PPM systems. In immature PPM systems, line managers tend to take advantage of their position in resource management. Surprisingly, the influence of portfolio managers in portfolio steering is insignificant. Altogether, this paper shows the diverse effect of the IoE of stakeholders on portfolio success. This study enriches project research by applying stakeholder theory to the project portfolio context and offers practical guidance for further professionalizing PPM.     

Boundary element analysis of rotationally symmetric systems under general boundary conditions

Engineering systems often exhibit cyclic symmetry (or rotational periodicity) of geometrical and physical properties. This paper deals with the use of this feature in the context of the direct boundary element method, and shows how to decompose an elastostatic and steady state b.v. problem with general (not cyclically symmetric) boundary conditions into a number of much smaller problems over a single segment.

There is no need to discretize the interfaces between adjacent segments. The decomposition is achieved by rotational transformations of physical into cyclic components     

Zu Fragen der Ausbildung und Weiterbildung im österreichischen Bergbau

Training and continuous education is today for the management of a mineral producing operation more important than ever before. The focus of education today in the field of mineral producing industry has not only to be dedicated versus the needs of the industry but also versus the importance of the ever increasing need of societal acceptance of industrial operations. Therefore it is expected that graduates from mining schools not only have a good knowledge of technical and economical subjects but also a good background for the realisation of environmental and safety targets for the people at work and in the neighbourhood of an operation. A strong request to the education and training at university level is therefore not only to deliver a broad knowledge but also the formation of a basis which allows to obtain authority for functions as “safety expert”, “Mine rescuer”, “waste disposal expert” and others. In the text the contents of the BSc study program “Natural resources” are reviewed and the training and education for a “Natural Resources Manager” together with the required continuous education is discussed.