Fast ping‐pong arbitration for input–output queued packet switches

Input–output queued switches have been widely considered as the most feasible solution for large capacity packet switches and IP routers. In this paper, we propose a ping‐pong arbitration scheme (PPA) for output contention resolution in input–output queued switches. The challenge is to develop a high speed and cost‐effective arbitration scheme in order to maximize the switch throughput and delay performance for supporting multimedia services with various quality‐of‐service (QoS) requirements. The basic idea is to divide the inputs into groups and apply arbitration recursively. Our recursive arbiter is hierarchically structured, consisting of multiple small‐size arbiters at each layer. The arbitration time of an n‐input switch is proportional to log₄?n/2? when we group every two inputs or every two input groups at each layer. We present a 256×256 terabit crossbar multicast packet switch using the PPA. The design shows that our scheme can reduce the arbitration time of the 256×256 switch to 11 gates delay, demonstrating the arbitration is no longer the bottleneck limiting the switch capacity. The priority handling in arbitration is also addressed. Copyright © 2001 John Wiley & Sons, Ltd.     

Design of an ultra fast pipelined wavelength scheduler for optical burst switching

Optical Burst Switching (OBS) is an emerging technology that allows variable size data bursts to be transported directly over DWDM links without encountering O/E/O conversion. In OBS, before the transmission of a data burst, a burst header is transmitted through an electronic control path, setting up and tearing down optical paths on-the-fly. Data bursts can remain in the optical domain and pass through the OBS network transparently. Unfortunately, system performance will be greatly degraded, if burst scheduling requests cannot be processed in time. This article quantitatively studied the negative impact of control path overloading on the performance of OBS networks. Results have shown that control path overloading greatly affects the performance of the OBS routers, especially for systems with large WDM channel counts. In order to remove this performance bottleneck, we have designed and implemented an ultra fast pipelined burst scheduler that is able to process a burst request every two clock cycles, regardless of the number of WDM channels per link. The design has been implemented in Verilog HDL and synthesized to FPGAs. Circuit level simulation results confirm the correctness of the design. The circuit has achieved 100 MHz in Altera Cyclone II devices, allowing the scheduler to process a burst request every 20 ns. To the authors’ best knowledge, this is the fastest implementation of burst scheduling algorithms.     

A probabilistic model-based approach to consistent white matter tract segmentation

Since the invention of diffusion magnetic resonance imaging (dMRI), currently the only established method for studying white matter connectivity in a clinical environment, there has been a great deal of interest in the effects of various pathologies on the connectivity of the brain. As methods for in vivo tractography have been developed, it has become possible to track and segment specific white matter structures of interest for particular study. However, the consistency and reproducibility of tractography-based segmentation remain limited, and attempts to improve them have thus far typically involved the imposition of strong constraints on the tract reconstruction process itself. In this work we take a different approach, developing a formal probabilistic model for the relationships between comparable tracts in different scans, and then using it to choose a tract, a posteriori, which best matches a predefined reference tract for the structure of interest. We demonstrate that this method is able to significantly improve segmentation consistency without directly constraining the tractography algorithm.     

Cathodoluminescence study of silicon oxide-silicon interface

In this paper, the local cathodoluminescence method was used to study the characteristics of the SiO₂-Si interface, the change of its properties during oxidation, and the influence of the type of silicon conductivity on its properties. This research shows that the first phase of silicon oxidation is the formation of amorphous silicon layers on the silicon surface and the appearance of silicon clusters in the natural silicon oxide. Cathodoluminescence gives the possibility of finding the presence of point defects in silicon oxide and silicon and of studying the distribution of such defects on the surface and in the depth. The text was submitted by the authors in English.     

Semiconductor-insulator structures in the phototargets of vidicons sensitive in the middle infrared region of the spectrum

The kinetics of electronic processes in vidicon phototargets based on semiconductor-insulator structures with a narrow-gap semiconductor is considered taking into account charge drain in the insulator layer and relaxation of the nonequilibrium depletion region in the semiconductor layer. The integration time, threshold sensitivity, and resolution at various intensities of incident radiation are estimated.     

AN-1071应用指南——D类功放基础（一）

如果我们在选择器件时很谨慎，并且考虑到精细的设计布线，因为杂散参数有很大的影响，那么目前高效D类功放可以提供和传统的AB类功放类似的性能。半导体技术不断创新使得效率提高，功率密度增加和较好的音响效果，增加了D类功放的运用。     

Bimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells

The performance of polymer:fullerene bulk heterojunction solar cells is heavily influenced by the interpenetrating nanostructure formed by the two semiconductors because the size of the phases, the nature of the interface, and molecular packing affect exciton dissociation, recombination, and charge transport. Here, X‐ray diffraction is used to demonstrate the formation of stable, well‐ordered bimolecular crystals of fullerene intercalated between the side‐chains of the semiconducting polymer poly(2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene. It is shown that fullerene intercalation is general and is likely to occur in blends with both amorphous and semicrystalline polymers when there is enough free volume between the side‐chains to accommodate the fullerene molecule. These findings offer explanations for why luminescence is completely quenched in crystals much larger than exciton diffusion lengths, how the hole mobility of poly(2‐methoxy‐5‐(3′,7′‐dimethyloxy)‐p‐phylene vinylene) increases by over 2 orders of magnitude when blended with fullerene derivatives, and why large‐scale phase separation occurs in some polymer:fullerene blend ratios while thermodynamically stable mixing on the molecular scale occurs for others. Furthermore, it is shown that intercalation of fullerenes between side chains mostly determines the optimum polymer:fullerene blending ratios. These discoveries suggest a method of intentionally designing bimolecular crystals and tuning their properties to create novel materials for photovoltaic and other applications.     

Establishment of a dynamic model for the p-Ge far IR laser

Using new experimental data from modeling the p-Ge laser pulse plus literature data, basic laser parameters are obtained so that one can solve the laser equations of Pantell and Puthoff to obtain formulas for calculating all laser quantities of interest. Values, calculated using the formulas, such as gain, saturation intensity, pump population differences, power generated, output coupling, efficiency, etc. are in excellent agreement with available experimental data. This work contributes to problems in determining laser line transitions, the laser cycle, and the optimization of the laser performance.     

The Ferroelectric Field Effect within an Integrated Core/Shell Nanowire

The synthesis of cylindrical silicon‐core and ferroelectric oxide perovskite‐shell nanowires and their response characteristics as individual three‐terminal nanoscale electronic devices is reported. The co‐axial nanowire geometry facilitates large ferroelectric field‐effect modulation (>10⁴) of nanowire conductivity following sequential application and removal of an applied dc field. Source‐drain current–voltage traces collected during sweeps of ferroelectric gate potential and switching of the component of shell outward and inward polarization provide direct evidence of ferroelectric coupling on nanowire channel conductance. Despite a very small (1:20) ferroelectric‐to‐semiconductor channel thickness ratio, an unexpectedly strong electrostatic coupling of ferroelectric polarization to channel conductance is observed because of the co‐axial gate geometry and curvature‐induced strain enhancement of ferroelectric polarization.     

Biodegradable Polyanhydrides as Encapsulation Layers for Transient Electronics

Bioresorbable electronic systems represent an emerging class of technology of interest due to their ability to dissolve, chemically degrade, disintegrate, and/or otherwise physically disappear harmlessly in biological environments, as the basis for temporary implants that avoid the need for secondary surgical extraction procedures. Polyanhydride‐based polymers can serve as hydrophobic encapsulation layers for such systems, as a subset of the broader field of transient electronics, where biodegradation eventually occurs by chain scission. Systematic experimental studies that involve immersion in phosphate‐buffered saline solution at various pH values and/or temperatures demonstrate that dissolution occurs through a surface erosion mechanism, with little swelling. The mechanical properties of this polymer are well suited for use in soft, flexible devices, where integration can occur through a mold‐based photopolymerization technique. Studies of the dependence of the polymer properties on monomer compositions and the rates of permeation on coating thicknesses reveal some of the underlying effects. Simple demonstrations illustrate the ability to sustain operation of underlying biodegradable electronic systems for durations between a few hours to a week during complete immersion in aqueous solutions that approximate physiological conditions. Systematic chemical, physical, and in vivo biological studies in animal models reveal no signs of toxicity or other adverse biological responses.