Soap-based detergent formulations: X. Nature of detergent deposits

The cumulative deposition of detergent residue on unsoiled cotton and polyester-cotton permanent press finish cloth was determined for a variety of detergent formulations after washing 25 consecutive times in 300 ppm hard water in a laboratory Tergotometer. Included in this study were: a phosphate-built laundry detergent, two carbonate-built detergents, tallow soap and various tallow soap formulations with anionic and amphoteric lime soap dispersing agents, and a glassy sodium silicate. Sample swatches washed with each formulation were analyzed for calcium, magnesium, and organic acid content. Fabric washed with the carbonate detergents showed the highest calcium and magnesium content, while those washed with the phosphate detergent and the soap-lime soap dispersant-builder formulations had the lowest. Fabric washed with soap alone had a much higher fatty acid residue than those washed with the other detergent formulations. However, the amount of organic acids left on the fabric after washing with a soap-lime soap dispersing agent formulation was no greater than that produced by phosphate- and carbonate-built detergents. The presence or absence of deposits also was verified visually with a scanning electron microscope. Each formulation also was tested for detergency by measuring the soil buildup in a multiwash procedure. Generally, the buildup of soil paralleled the deposit of detergent residue on the unsoiled cloths.     

Retarding effects of DNA on the autoxidation of liposomal suspensions

Deoxyribonucleic acid (DNA) is associated with the cell membrane of prokaryotes and the inner nuclear membrane of eukaryotes. The unsaturated fatty acids of phospholipids, which constitute the bilaminar structure of membranes, undergo autoxidation in the presence of O₂. Calf thymus DNA was incubated with methyl archidonate-enriched phosphatidyl choline liposomes in order to study the effect of DNA upon the oxidation of phospholipids while present in their natural in vivo bilayer configuration. DNA retarded the rate of lipid oxidation and the TBA test, but it did not alter the induction period. These results suggest that DNA is scavenging free radicals produced within the phospholipid bilayer.     

Cyclic alkanes as geochemical markers in coal liquefaction products

Branched-chain/cyclic alkanes have been obtained, by solvent extraction and molecular-sieve adsorption, from a UK low-temperature (Rexco) coal tar, a USA fluidized-bed pyrolysis (FMC COED) coal tar, and a novel supercritical-gas-extract of a Turkish (Elbistan) lignite. Mass spectrometry (with gas chromatography and field-desorption) established the presence of mono-, di (including sesquiterpanes), tri-, tetra- (steranes only), and pentacyclic (triterpanes only) alkanes, including several steranes and triterpanes not previously reported as coal-tar constituents. The potential of cyclic alkanes as geochemical markers, even for commercial coal products subjected to appreciable heat treatment, is demonstrated by the identification of C₁₂, C₁₃, C₁₅ and C₁₆ dicyclics (including isoprenoid alkanes), C₁₇-C₂₆ tricyclics, and C₂₇ and C₂₉ hopane-type pentacyclics (triterpanes) in FMC, and of C₁₆-C₃₈ monocyclics, C₃₄-C₃₆ dicyclics, C₂₂-C₃₆ tricyclics, C₂₇-C₃₀ tetracyclics (steranes), and C₂₇, C₂₉, C₃₀, C₃₁, C₃₂, and C₃₃ hopane-type pentacyclics (triterpanes) in Rexco tar. Tetra- and pentacyclic alkanes were also preserved in the lignite extract.     

Assessment of response function in two PET scanners with and without interplane septa

The authors have assessed the response function both experimentally and theoretically for two commercial tomographs: CTI 931/08-12 and CTI 953B with and without interplane septa. Monte Carlo simulations were undertaken using the GEANT package from CERN. Spatial resolution (tomographic and axial) was calculated for line sources at various positions in the field of view. Sensitivity and scatter fraction (SF) were calculated for various source geometries as a function of energy discrimination. A very realistic response function in positron emission tomography (PET) is obtained by Monte Carlo methods, using global parameters to account for unsimulated phenomena such as scintillation light transport inside a detector block and its sharing among the various phototubes. Minor discrepancies remain for sensitivity and SF at high energy thresholds and may probably be explained by introducing the observed dispersion in the energy response for the various crystals within a detector block.     

Noise equivalent count measurements in a neuro-PET scanner with retractable septa

The noise-equivalent count-rate (NEC) performance of a neuro-positron emission tomography (PET) scanner has been determined with and without interplane septa on uniform cylindrical phantoms of differing radii and in human studies to assess the optimum count rate conditions that realize the maximum gain. In the brain, the effective gain in NEC performance for three-dimensions (3-D) ranges from >5 at low count rates to approximately 3.3 at 200 kcps (equivalent to 37 kcps in 2-D). The gains of the 3-D method assessed by this analysis are significant, and are shown to be highly dependent on count rate and object dimensions.     

DB2 Universal Database: A Case Study of a Successful User-Centered Design Program

This case study describes the application of user-centered design (UCD) principles to the development of a complex middleware software product-IBM's DB2(r) Universal Database. Motivated by trade press reviews highlighting ease-of-use problems, a multisite development team utilized IBM UCD to transform ease of use into a featured product attribute. This case study describes the initial application of UCD to DB21 and the positive business results that followed: critical acclaim, increased marketshare and user satisfaction, and increased support and adoption of UCD across the IBM database product family. Although ease-of-use objectives, target markets, and human factors practitioners' roles have evolved over 6 years and multiple versions of the product, DB2 continues to achieve positive results with UCD. In addition to the flexibility of the UCD methodology, other factors that influenced DB2's success included management support, resource commitment, cross-site communication and collaboration, detailed product specifications, and a focus on supporting user tasks.     

Determinants for Successful Agile Collaboration between UX Designers and Software Developers in a Complex Organisation

ABSTRACT

Agile and User-centered design processes have been reported to frequently putting contradictory demands on people working within these methodological frameworks. The current research addresses this point by focussing on the crucial relationship between software developer and designer. An online survey, a contextual inquiry, and a diary study were employed with 107 developers and designers in a large media organization to determine the factors for success in agile development cycles. The results from the survey show that while developers and designers have similar levels of satisfaction with agile processes, there are differences in the factors predicting those ratings. Developers are happier with the wider teamwork but want more access to and close collaboration with designers, while the latters’ concern was the quality of the wider teamwork. Additional contextual inquiries and a diary study with pairs of designers and developers reflected the survey findings that close cooperation (and proximity) was essential for improving communication, reducing inefficiencies, and avoiding suboptimal products being released. However, organizational processes, the setup of the work environment, and managerial traditions meant that this close collaboration and localized decision-making was found difficult to maintain. Results from the survey, the contextual inquiry, and the diary study found six factors for success from collaborations emerged.     

Invasive species detection in Hawaiian rainforests using airborne imaging spectroscopy and LiDAR

Remote sensing of invasive species is a critical component of conservation and management efforts, but reliable methods for the detection of invaders have not been widely established. In Hawaiian forests, we recently found that invasive trees often have hyperspectral signatures unique from that of native trees, but mapping based on spectral reflectance properties alone is confounded by issues of canopy senescence and mortality, intra- and inter-canopy gaps and shadowing, and terrain variability. We deployed a new hybrid airborne system combining the Carnegie Airborne Observatory (CAO) small-footprint light detection and ranging (LiDAR) system with the Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) to map the three-dimensional spectral and structural properties of Hawaiian forests. The CAO-AVIRIS systems and data were fully integrated using in-flight and post-flight fusion techniques, facilitating an analysis of forest canopy properties to determine the presence and abundance of three highly invasive tree species in Hawaiian rainforests.

The LiDAR sub-system was used to model forest canopy height and top-of-canopy surfaces; these structural data allowed for automated masking of forest gaps, intra- and inter-canopy shadows, and minimum vegetation height in the AVIRIS images. The remaining sunlit canopy spectra were analyzed using spatially-constrained spectral mixture analysis. The results of the combined LiDAR-spectroscopic analysis highlighted the location and fractional abundance of each invasive tree species throughout the rainforest sites. Field validation studies demonstrated < 6.8% and < 18.6% error rates in the detection of invasive tree species at  7 m² and  2 m² minimum canopy cover thresholds. Our results show that full integration of imaging spectroscopy and LiDAR measurements provides enormous flexibility and analytical potential for studies of terrestrial ecosystems and the species contained within them.     

Informal learning with PDAs and smartphones

Abstract There has been increasing interest in informal learning in recent years alongside interest in how such learning can be supported by technology. However, relatively little is known about the extent to which adults make use of their own mobile devices to support informal learning. In this study, a survey was used to investigate whether, and to what extent, experienced users of mobile devices use their mobile devices to support intentional informal learning. If so, do they make use of mobile device connectivity to support opportunistic informal learning and does such connectivity support or encourage collaborative informal learning? Experienced mobile device users were recruited from web forums and business, and asked whether they used their devices to support informal learning. A pattern of learning uses emerged, some of which deployed the mobile device capabilities relatively unchanged, others triggered adaptations to typical learning activities to provide a better fit to the needs of the learner. These informal learning activities provided the basis for the design of a flexible mobile learning framework that can be extended to support developments in mobile technology, and increasing use of Web 2.0 technologies by informal learners.     

Trust in consumer-to-consumer electronic commerce

We developed a model of consumer-to-consumer (C2C) e-commerce trust and tested it. We expected that two influences: internal (natural propensity to trust [NPT] and perception of web site quality [PWSQ]) and external (other's trust of buyers/sellers [OTBS] and third party recognition [TPR]) would affect an individual's trust in C2C e-commerce. However contrary to studies of other types of e-commerce, support was only found for PWSQ and TPR; we therefore discussed possible reasons for this contradiction. Suggestions are made of ways to help e-commerce site developers provide a trustworthy atmosphere and identify trustworthy consumers.