Noise equivalent count measurements in a neuro-PET scanner with retractable septa

The noise-equivalent count-rate (NEC) performance of a neuro-positron emission tomography (PET) scanner has been determined with and without interplane septa on uniform cylindrical phantoms of differing radii and in human studies to assess the optimum count rate conditions that realize the maximum gain. In the brain, the effective gain in NEC performance for three-dimensions (3-D) ranges from >5 at low count rates to approximately 3.3 at 200 kcps (equivalent to 37 kcps in 2-D). The gains of the 3-D method assessed by this analysis are significant, and are shown to be highly dependent on count rate and object dimensions.     

The days ahead

How are government controls affecting healthcare foodservices?Are growing elderly & outpatient populations changing foodservices' missions. What are the hottest trends? As members of the American Society for Hospital Food Service Administrators prepared for their annual meeting in Orlando, FM queried 11 Southeastern directors to learn their most pressing concerns & how they are positioning their departments for the future.     

Optimization of the in Situ Transesterification of Grain Sorghum (Milo) DDGS to Fatty Acid Methyl Esters and Fatty Acid Ethyl Esters

Distillers grains and solubles generated from the ethanol fermentation of grains contain acylglycerols (AG) that can be successfully converted to fatty acid methyl esters (FAME) and fatty acid ethyl esters (FAEE), commonly known as biodiesel. However, when grain sorghum (milo) DDGS were used as a feedstock for in situ transesterification (IST) under the previously established optimal conditions for other AG-bearing substrates, the yield plateaued at only 32.2% (corrected in this study to 24.2%). Several IST studies have reported significantly higher conversions of AG-bearing substrates to FAME. Therefore, the goal of this IST study was to improve the conversion of the AG in milo DDGS to FAME and FAEE by varying the temperature of reaction, the concentrations of the base (sodium methylate, NaOMe), volume of methanol and ethanol, and the amount of moisture in DDGS. Methyl tert-butyl ester was also evaluated as a co-solvent intended to improve miscibility and reaction rate. Among these variables, the most effective change was an increase in temperature from 40 to 65 °C. The most successful reaction used a AG:NaOMe:MeOH molar ratio of 1.0:2.6:168.9. Those reaction conditions used 4.8 mmol NaOMe dissolved in 12.6 mL MeOH and resulted in a 79.8% conversion of AG to FAME.     

The Oxidation of NdFeB Magnets

The oxidation kinetics in air of a commercial NdFeB magnet have been investigated over the temperature range 335–500°C. The oxide microstructure has been characterized by SEM, XRD and cross-sectional TEM. The results show that the external scale formed consists of an outer layer of Fe₂O₃ and an inner layer of Fe₃O₄ but that the principal degradation process is the formation of an extensive zone of internal oxidation. HREM has been used to show that this zone contains NdO particles embedded in an -Fe matrix. These particles are discrete and very small, approximately 2 nm in diameter, and have an amorphous structure. The -Fe matrix has a columnar grain structure with a grain width of approximately 100 nm. It is argued that the high rates of internal oxidation arise because the external-oxide layers are not protective at the oxidation temperature, and oxygen penetrates to the zone front by fast diffusion along the columnar -Fe grain boundaries.     

Crystal structures and phase transformation of deuterated lithium imide, Li2ND

Half-Heusler compounds of Sn-doped TiCoSb “TiCoSn_xSb_1−x (x = 0.0, 0.01, and 0.05)” were prepared and their thermoelectric properties were measured above room temperature. From the EDX analysis, all the samples have three phases: the TiCoSn_xSb_1−x, Co-rich, and Ti-rich phases. The values of the thermoelectric power increase with Sn doping, and a positive thermoelectric power is obtained in the sample of TiCoSn_0.05Sb_0.95. The thermal conductivity decreases both with increasing temperature and with Sn content. The maximum value of ZT for p-type material is 0.030 at 988 K in the sample of TiCoSn_0.05Sb_0.95.     

Corrosive Wear in Wet Ore Grinding Systems

JOM - Wear processes in ball and rod mills have recently received increased attention in order to increase efficiency and conserve grinding media. Direct removal of metal from the grinding media...     

Environmental Influences on Fish Migration in a Hydropeaking River

Fish have evolved traits and life history characteristics that enable them to survive, exploit and depend on the flow regime of rivers, particularly the timing and predictability of flows for spawning and rearing their young. It is unclear to what degree pulsed flows from hydropower facilities and other environmental variables influence migratory behaviours. We used Dual Frequency Identification Sonar in the Michipicoten River, Canada, to address the relationship between fish migration and environmental factors with a focus on flow magnitude and fluctuation. In both 2007 and 2009, the peak of the Chinook (Oncorhynchus tshawytscha) and pink salmon (Oncorhynchus gorbuscha) migration occurred on 8 September. Mean water temperature on this date was 18 °C and precipitously dropped afterwards. The photoperiod was roughly 12‐h long with sunrise at 700 h and sunset at 2000 h. Most fishes moved upstream during the hours of darkness between 2000 and 600 h. The lowest counts of fish occurred from noon to just before sunset, whereas highest counts commonly occurred from 1 to 2 h after sunset. Fish moved upstream during all magnitudes of flow; however, there was a slight preference for larger flows in 2007 but not in 2009. Changes in flow magnitude occurred both during the day and night, with flows typically increasing during the day to meet electrical demand and decreasing at night. Most fishes moved upstream during periods of little to no change in flow. High flows and changing flows may deter salmon from moving up the Michipicoten River but not likely in a significant manner to cause energetic stress or harm. Other adverse effects of pulsed flows, however, must still be considered for spawning, hatching and rearing success. Copyright © 2014 John Wiley & Sons, Ltd.     

DB2 Universal Database: A Case Study of a Successful User-Centered Design Program

This case study describes the application of user-centered design (UCD) principles to the development of a complex middleware software product-IBM's DB2(r) Universal Database. Motivated by trade press reviews highlighting ease-of-use problems, a multisite development team utilized IBM UCD to transform ease of use into a featured product attribute. This case study describes the initial application of UCD to DB21 and the positive business results that followed: critical acclaim, increased marketshare and user satisfaction, and increased support and adoption of UCD across the IBM database product family. Although ease-of-use objectives, target markets, and human factors practitioners' roles have evolved over 6 years and multiple versions of the product, DB2 continues to achieve positive results with UCD. In addition to the flexibility of the UCD methodology, other factors that influenced DB2's success included management support, resource commitment, cross-site communication and collaboration, detailed product specifications, and a focus on supporting user tasks.