Kinetics of zinc oxide formation from zinc sulfide by reaction with lime in the presence of water vapor

A novel reaction scheme for transforming certain metal sulfides to the corresponding oxides has been developed. In this process, steam oxidizes the sulfide into the oxide, and the hydrogen sulfide produced reacts with lime to form calcium sulfide and regenerate steam. There is no net consumption or generation of gaseous species. Thus, the overall reaction can be carried out in a closed system as far as the gas phase is concerned. This eliminates the possibility of emitting hydrogen sulfide out of the reactor. Only certain metal sulfides are thermodynamically amenable to this treatment. In this paper, the reaction of ZnS to ZnO by this scheme is described, together with a detailed formulation of the rate equation for the overall reaction based on the kinetics of the component gas-solid reactions. Although the present work was done with CaO, other suitable oxides may be used in its place. A further potential application of this process is to the selective oxidation of certain sulfide(s) from complex sulfide ores as a treatment prior to the separation of minerals.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Single fundamental mode photonic crystal vertical cavity laser with improved output power

The single fundamental mode output power of photonic crystal vertical cavity lasers is improved by varying sizes of oxide apertures and defect lasing apertures. A maximum output power of 3.1 mW in the fundamental mode has been achieved with a new fabrication process that involves only focused ion beam etching to create holes in selectively oxidised VCSELs.     

Joint data rate and power allocation for lifetime maximization in interference limited ad hoc networks

In this paper, we consider the following problem in the wireless ad hoc network: Given a set of paths between source and destination, how to divide the data flow among the paths and how to control the transmission rates, times, and powers of the individual links in order to maximize the operation time of the worst network node. If all nodes are of equal importance, the operation time of the worst node is also the lifetime of the network. By solving the problem, our aim is to investigate how the network lifetime is affected by link conditions such as the maximum transmission power of a node and the peak data rate of a link. For the purpose, we start from a system model that incorporates the carrier to interference ratio (CIR) into a variable data rate of a link. With this, we can develop an iterative algorithm for the lifetime maximization, which resembles to the distributed power control in cellular systems. Numerical examples on the iterative algorithm are included to illustrate the network lifetime as a function of the maximum transmission power and the peak data rate.     

由碳五馏分合成甲基叔戊基醚工艺的研究

以催化裂化C_5馏分与工业甲醇为原料,D005型大孔强酸型阳离子交换树脂为催化剂,采用筒式膨胀床双反应器,考察了甲基叔戊基醚的合成工艺条件。一阶反应器的操作条件为：循环比为2：1,醇烯比为1.2：1,入口温度为70℃,空速为6 h~(-1),平均转化率为53.63%；二阶反应器的操作条件为：入口温度为50℃,空速为1.2h~(-1),平均转化率为71.32%,全调合方案可以使催化裂化汽油的辛烷值平均提高0.55个单位。     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.     

Rapid and comprehensive indicator for evaluation of performance of treatment processes and of river waters.

Naturally occurring UV active compounds, commonly present in almost all source waters, can be rapidly monitored by their ultraviolet absorbance at 260 nm (E260). Herein, the extent of correlation between the E260 and the removal efficiency of the hazardous contaminants, endocrine disrupters and dioxins, were investigated using various treatment and river source waters. The detection of various types of hazardous contaminants using sophisticated analytical methods, such as high resolution gas chromatography (HRGC)/high resolution mass spectrometry (HRMS) and high performance liquid chromatography (HPLC)/inductively coupled plasma (ICP)/mass spectrometry (MS), as well as various short-term bioassays, can require hours or even days for results to be obtained. The removal of the E260 correlated well with those of individual contaminants, such as endocrine disruptor chemicals and dioxins, with the various treatment processes employed. In the plots of the endocrine disrupters against the DOC/E260, a correlation was found with the endocrine activity of the Korean/Japanese river waters employed in this study.     

Value management and common accounting performance measures for corporations

Management is aware that the value of firms is the ultimate measure of company performance. However, management has been using common accounting measures as an operating guide because the linkage between operational planning and value is vague and complex and, therefore, difficult to apply. Managers need to have clear targets and performance measures to track progress. This paper examines if a set of common accounting performance measures are linked tightly to the overall value of the firm. An abductive learning network (ALN) approach, an artificial intelligence technique, is used in this research because an ALN approach is non-parametric and can capture a subtle dynamic relationship between input and output variables, which is not obvious in linear statistical analysis. Empirical results show that an ALN model is very effective in synthesizing the value of the firm using six common accounting variables. The results also provide four strategic variables that can be used for devising strategic and operating plans to maximize the value of firms.