Comments on “A Petri net model for temporal knowledgerepresentation and reasoning”

Yao (1994) has presented a unified time Petri net model (TPN) for temporal knowledge representation and reasoning, where the TPN model presented has a good contribution to the aspect of temporal knowledge representation and reasoning. However, there are a number of errors which should be corrected. The purpose of the paper is to identify these errors, and the corrections provided permit the readers who have been confused by the errors to gain a better understanding of the good ideas presented.     

SiCf/O′-SiAlON composite: properties and oxidation retained properties

A composite of O′SiAlON (Si_2-xAl_xN_2-xO_1+x, with x 0.14) reinforced with 20 vol.% SiC monofilaments was fabricated by hot-pressing, at 1600°C, for 2 h under 34 MPa pressure. The mechanical and interfacial properties of the composites, as-fabricated as well as post-oxidized, were, investigated. The composite exhibited a significant improvement in ultimate flexure strength (640 MPa) and work of fracture (42 kJ m⁻²) compared with that (350 MPa and 1.8 kJ m⁻², respectively) of the monolithic material. These mechanical properties were slightly increased after the composite was heat treated for 24 h in air at 1200 and 1300°C. However, the composite exhibited a significant degradation in ultimate strength, while the work of fracture (WOF) remained unchanged after exposure in air at temperatures beyond 1400°C. The as-fabricated composite revealed a low interfacial shear strength (6.2 MPa) and a frictional sliding stress (3.2 MPa). After the composite was oxidized at elevated temperatures, the interfacial bonding and sliding stresses were reduced to noticeable extents, resulting from the degradation of the carbon coating layer of the SiC monofilaments.     

Testing of the multi-application small light water reactor (MASLWR) passive safety systems

Experimental thermal hydraulic research has been conducted at Oregon State University for the purpose of assessing the performance of a new reactor design concept, the multi-application small light water reactor (MASLWR). The MASLWR is a pressurized light water reactor design with a net output of 35 MWe that uses natural circulation in both normal and transient operation. Due to its small size, portability and modularity, the MASLWR design is well suited to help fill the potential need for grid appropriate reactor designs for smaller electricity grids as may be found in developing or remote regions. The purpose of the OSU MASLWR test facility is to assess the operation of the MASLWR under normal full operating pressure and full temperature conditions and to assess the passive safety systems under transient conditions. The data generated by the testing program will be used to assess computer code calculations and to provide a better understanding of the thermal-hydraulic phenomena in the design of the MASLWR NSSS. During this testing program, four tests were conducted at the OSU MASLWR test facility. These tests included one design basis accident and one beyond design basis accident. During the performance of these tests, plant operations to include start up, normal operation and shut down evolutions were demonstrated successfully.     

alpha B-crystallin and hsp25 in neonatal cardiac cells--differences in cellular localization under stress conditions

OBJECTIVES: The aim of this study was to determine (a) whether delay in femur fracture stabilization beyond twenty-four hours in patients with head injury increased the risk of pulmonary complications and (b) whether immediate (up to twenty-four hours) femur fracture stabilization increased the risk of central nervous system (CNS) complications. DESIGN: Retrospective analysis. MATERIALS AND METHODS: Thirty-two patients with femur fracture and head injury were identified. Fourteen underwent immediate stabilization of their fractures, and eighteen underwent delayed (four-teen patients) or no (four patients) stabilization of their fractures. RESULTS: In the immediate stabilization group, five patients had severe head injuries [Glasgow Coma Score (GCS) < or = 8] and nine had mild head injuries (GCS > 8). In the mild head injury group, no patient had a pulmonary complication and one had a CNS complication. In the severely head-injured group, one patient had a pulmonary complication and no patient had a CNS complication. In the delayed stabilization group, six patients had mild head injuries (GCS > 8) and twelve had severe head injuries (GCS < or = 8). In the mildly head injured group, one patient had a pulmonary complication, two patients had CNS complications, and one patient died. In the severely head injured group, nine patients had pulmonary complications, three patients had CNS complications, and one patient died. Logistic regression identified delay in femur stabilization as the strongest predictor of pulmonary complication (p = 0.0042), followed by severity of chest Abbreviated Injury Score (AIS; p = 0.0057) and head AIS (p = 0.0133). Delaying fracture stabilization made pulmonary complications forty-five times more likely. Each point increase in the chest AIS and head/neck AIS increased the risk of pulmonary complication by 300 percent and 500 percent, respectively. A statistically significant predictor of CNS complications could not be identified by using logistic regression. CONCLUSION: Delay in stabilization of femur fracture in head-injured patients appears to increase the risk of pulmonary complications. However, due to selection bias in this patient sample, this question cannot be definitively answered. Early fracture stabilization did not increase the prevalence of CNS complications.     

Is the chest radiograph a reliable tool in the assessment of tumor response after radiotherapy in nonsmall cell lung carcinoma?

BACKGROUND: The purpose of this study was to evaluate whether the chest radiograph is a reliable tool to assess response to radiotherapy. MATERIALS AND METHODS: Pre- and post-treatment chest radiographs and computed tomographs (CT) of 63 patients with nonsmall cell lung cancer (NSCLC) treated by radiotherapy were reviewed by four observers with regard to suitability for tumor measurement, and response. Suitability for tumor measurement was expressed as the number of measurable diameters. In addition, the consequences to clinical outcome were studied by survival analysis. RESULTS: The CT turned out to be more suited for tumor measurement before as well as after radiotherapy, resulting in an increase of the number of measurable cases. The number of measurable cases with CT was 52 (83%) as compared to 28 (44%) with chest radiography. Especially in case of centrally localized tumors, the presence of an atelectasis, or squamous cell carcinoma, CT contributed to a higher rate of measurable cases. The interobserver agreement with regard to response using chest radiograph was good (mean kappa = 0.74). In 25 of 28 cases (89%) measurable with CT as well as with chest radiograph, response was equally classified. When CT was used, the median survival of the responders was 14.2 months as compared to 6.8 months of the nonresponders. When chest radiograph was used, the median survival of these groups was 12.0 and 6.6 months respectively, which was not significantly different when response was assessed by CT. CONCLUSION: We conclude that CT is more suited for tumor measurement because more measurable lesions can be found and more evaluable lesions on chest radiograph become measurable on CT. The chest radiograph does have a valuable role to play in those lesions that are measurable because of the good interobserver agreement with regard to the response classification, the high overall agreement between CT and chest radiograph in case of measurable cases, and the lack of important differences with regard to survival.     

Strain compensated InGaAs-GaAsP-InGaP laser

The performance characteristics of InGaAs-GaAsP-InGaP strain compensated laser emitting near 1 /spl mu/m are reported. The ridge waveguide lasers have room temperature threshold current of 18 mA and differential quantum efficiency of 0.45 W/A/facet. The linewidth enhancement factor is smaller and gain coefficient is larger for these strain compensated lasers compared to that for conventional strained layer laser. This may be due to higher effective compressive strain in the light emitting layer of these devices which reduces the effective mass. The observed larger gain coefficient is consistent with the measured larger relaxation oscillation frequency of these lasers compared to that for a conventional strained layer laser.