Chaotic fluid mixing by alternating microparticle topologies to enhance biochemical reactions

We report experimental results on chaotic mass transport induced by alternating topological changes of magnetic particle chains actuated by a rotating magnetic field. Results on the induced fluid flows, through particle tracing experiments and mixing experiments, are obtained for (1) the regime of rigid chain rotation and (2) the regime wherein chains periodically fragment and reform. In the case of rigid rotating chains, the overall tracer particle trajectories are steady, slightly modulated circles around the center of the microparticle chains. In the regime of periodic chain breaking and reformation, the tracer particle trajectories become chaotic. The level of mixing is measured by using a mixing index (M) in a water–dye system, i.e., in a perfectly mixed system M = 0, while in an unmixed system M = 1. When particle chains periodically break and reform, we observe that the mixing index M decreases from 1 to 0.1 within 15 rotational cycles. For rigid rotating chains, M reaches a minimum of only 0.5. We also report the effect of the different actuation regimes on a biological binding reaction in the solution and indeed found that the reaction product (at equal actuation time) is significantly enhanced (3 times) by the dynamic chain regime as compared to the rigid chain regime. We conclude that the alternating topological change of microparticle chains—with repetitive chain breakup and chain reformation—is an effective mechanism to achieve chaotic mixing and thereby promote and homogenize reactions in lab-on-a-chip systems.     

Influence of amorphous silica on the hydration of tricalcium aluminate

Amorphous silica influences tricalcium aluminate (C₃A) hydration both in pastes and in suspensions. Two heat peaks are found by isothermal calorimetry during the paste hydration of C₃A. The addition of amorphous silica causes the second heat peak to shift towards shorter reaction times and become more pronounced. In suspensions, the change in ion concentration in the water phase is not influenced by the presence of amorphous silica except that the change in concentration occurs more quickly. Quantitative X-ray analysis shows that more 3CaO.Al₂O₃.6H₂O is present in suspensions containing amorphous silica than in silica-free suspensions at equal hydration times.     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

Preparation and characterization of modified starch‐based plastic film reinforced with short pulp fiber. II. Mechanical properties

Native corn starch‐ and hydroxypropylated starch (HPS‐) based plastic films were prepared using the short pulp fiber as the reinforcement and the glycerol as the plasticizer. The results of tensile test showed that the strain and stress at break and elastic modulus increased with pulp content. With glycerol content, the strain at break increased considerably, but the breaking stress and elastic modulus decreased. And the stress–strain curves showed that the brittleness problem of films was overcome by the pulp, glycerol, and water content. The hydroxypropyl starch films showed results similar to those of the native starch films. The results of the three‐point bending test showed that maximum deflection, flexural strength, and specific work increased with pulp content, but the flexural modulus was the highest at a pulp content of 20%. And with the glycerol content, the maximum deflection and specific work of rupture increased, but the bending elastic modulus decreased. The hydroxypropyl starch films showed results similar to those of native starch films as far as the maximum deflection and flexural strength were concerned, but the bending elastic modulus and specific work of the hydroxypropyl starch films were considerably lower than those of starch films. So it was concluded that the flexibility of films was improved by the hydroxypropylation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2108–2117, 2003     

Advanced underfill for high thermal reliability

The key to the success of flip‐chip technology lies in the availability of sucessful underfill materials. However, the reliability of flip‐chip technology using current underfill materials is generally found to be lower than that of conventional wire‐bond connection packaging materials such as epoxy molding compound (EMC) because of the high coefficients of thermal expansion (CTE) and moisture absorption of cured underfill material. In this study desbimide (DBMI), which has a low melting point (about 80°C), was used in the underfill materials as a cohardener. As a result, DBMI‐added underfill can show excellent thermal reliability, which is due to the superior properties of the CTE, the elastic modulus, and water resistance. When the properties of a 2 wt % DBMI‐added underfill were compared with those of a typical underfill (epoxy/anhydride), the CTE value was reduced to less than one‐half at the solder reflow temperature (about 200°C), the elastic modulus was reduced to less than one‐half in the temperature region below the glass‐transition temperature, and the water resistance was improved twofold. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2617–2624, 2002     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Absorption of NO x in packed column (I)

A mathematical model for an absorption of nitrogen oxides into water in packed column was developed based on the mass-transfer coefficient in packed column and the chemical reaction accompanying NO _x absorption produces HNO₃ and HNO₂ in the liquid phase. The subsequent dissociation of HNO₂ in the liquid-phase results in the formation of HNO₃ and NO gas, and then this NO gas follows to be oxidized by O₂ in air. The important factors influenced on the absorption of NO _x are the oxidation state of NO gas and the partial pressure of nitrogen oxides in the gas. The efficiency of NO _x absorption increases with the increase of the partial pressure of NO _x . The most critical value for using the model is the constant of .The selection of 11×10⁻⁴kg·mol/atm·m²·sec for resonable for this model.     

Influence of mixing cycle on the degree of mixing of calcite‐filled polyethylene upon stretching

The mixing cycle‐dependent degree of dispersion and degree of mixing of a calcite (calcium carbonate) agglomerate in high‐density polyethylene (HDPE), low‐density polyethylene (LDPE), and linear low‐density polyethylene (LLDPE) matrices upon stretching was investigated using three different techniques: mechanical property, morphological behavior, and image analyzer analyses. The mechanical properties analyzed in terms of the tensile strength and maximum elongation resulted in that the second mixing was the best for giving a better property for all systems except the LDPE system, which exhibited no significant difference between the second and third mixings. The morphological behavior of the three compounds were different, but no distinctive difference was observed to differentiate the degree of mixing from system to system. The number‐, weight‐, and z + 1‐average diameters of the air hole and the aspect ratio upon the stretching and mixing cycle were calculated to analyze the degree of mixing of the calcite‐filled composites. As a consequence, no difference in the average diameter of the air hole was obtained among the three systems, but the aspect ratios of the air hole varied significantly. Thus, the degree of dispersion and the degree of mixing may be influenced by the average calcite agglomerate size, the average diameter of the air hole, and the aspect ratio upon stretching and mixing cycles. Those factors would be formed by the difference in chemical characteristics upon various microstructures of polyethylene and its molecular weight and molecular weight distribution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 311–321, 2003     

Olfactory coding in the perception of semiochemicals

Information processing in the olfactory pathway underlying the perception of semiochemicals by insects is discussed. Both the chemical message for mates and the message for food consist of blends of chemicals. Olfactory receptors in an insect species are tuned to the detection of those compounds which comprise such chemical messages for that species. The classification of receptors as specialists or generalists coincides with two concepts of information processing, i.e., labeled lines and across-fiber patterns, respectively. The olfactory code coming from antennal receptors inPieris brassicae larvae is a combination of labeled lines and across-fiber patterning. When antennae of adult Colorado potato beetles,Leptinotarsa decemlineata, are stimulated by binary mixtures of leaf odor components, the pattern of neural activities in the olfactory receptors shows some separation into two channels, quantitative versus qualitative detection. The separation is complete in the antennal lobe of this beetle.Presented at the Symposium on Insect Chemical Communications: Unifying Concepts. ACS 194th National Meeting, New Orleans, Louisiana, August 31, 1987.     

Methyl tert-butyl ether decomposition over heteropoly acid catalyst in a cellulose acetate membrane reactor

In this study the methyl tert-butyl ether (MTBE) decomposition over H₃PW₁₂O₄₀ was carried out in a cellulose acetate membrane reactor. The permeability of methanol through the cellulose acetate membrane was about 30 and 300 times higher than that of either isobutene or MTBE, respectively. The isobutene selectivity in the fixed bed reactor was only slightly higher than the methanol selectivity due to the side reaction. In the cellulose acetate membrane reactor, however, the isobutene selectivity in the rejected stream was 68% and the methanol selectivity in the permeated stream was up to 97%. The MTBE conversion in the membrane reactor was about 7% higher than that in the membrane-free fixed bed reactor under the same reaction conditions. The enhanced performance of the membrane reactor in this reversible reaction was mainly due to the selective permeation of methanol which resulted in a methanol-deficient condition suppressing MTBE synthesis reaction.