Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Enabling On-Demand Conformal Zn-Ion Batteries on Non-Developable Surfaces

Conventional power sources encounter difficulties in achieving structural unitization with complex-shaped electronic devices because of their fixed form factors. Here, it is realized that an on-demand conformal Zn-ion battery (ZIB) on non-developable surfaces uses direct ink writing (DIW)-based nonplanar 3D printing. First, ZIB component (manganese oxide-based cathode, Zn powder-based anode, and UV-curable gel composite electrolyte) inks are designed to regulate their colloidal interactions to fulfill the rheological requirements of nonplanar 3D printing, and establish bi-percolating ion/electron conduction pathways, thereby enabling geometrical synchronization with non-developable surfaces, and ensuring reliable electrochemical performance. The ZIB component inks are conformally printed on arbitrary curvilinear substrates to produce embodied ZIBs that can be seamlessly integrated with complicated 3D objects (including human ears). The conformal ZIB exhibits a high fill factor (i.e., areal coverage of cells on underlying substrates, ≈100%) that ensures high volumetric energy density (50.5 mWh cm_cell⁻³), which exceeds those of previously-reported shape-adaptable power sources.     

Effect of stents coated with a combination of sirolimus and alpha-lipoic acid in a porcine coronary restenosis model

The aim of this study was to evaluate antiproliferative sirolimus- and antioxidative alpha-lipoic acid (ALA)-eluting stents using biodegradable polymer [poly-l-lactic acid (PLA)] in a porcine coronary overstretch restenosis model. Forty coronary arteries of 20 pigs were randomized into four groups in which the coronary arteries had a bare metal stent (BMS, n = 10), ALA-eluting stent with PLA (AES, n = 10), sirolimus-eluting stent with PLA (SES, n = 10), or sirolimus- and ALA-eluting stent with PLA (SAS, n = 10). A histopathological analysis was performed 28 days after the stenting. The ALA and sirolimus released slowly over 30 days. There were no significant differences between groups in the injury or inflammation score; however, there were significant differences in the percent area of stenosis (56.2 ± 11.78 % in BMS vs. 51.5 ± 12.20 % in AES vs. 34.7 ± 7.23 % in SES vs. 28.7 ± 7.30 % in SAS, P < 0.0001) and fibrin score [1.0 (range 1.0–1.0) in BMS vs. 1.0 (range 1.0–1.0) in AES vs. 2.0 (range 2.0–2.0) in SES vs. 2.0 (range 2.0–2.0) in SAS, P < 0.0001] between the four groups. The percent area of stenosis based on micro-computed tomography corresponded with the restenosis rates based on histopathological stenosis in different proportions in the four groups (54.8 ± 7.88 % in BMS vs. 50.4 ± 14.87 % in AES vs. 34.5 ± 7.22 % in SES vs. 28.9 ± 7.22 % in SAS, P < 0.05). SAS showed a better neointimal inhibitory effect than BMS, AES, and SES at 1 month after stenting in a porcine coronary restenosis model. Therefore, SAS with PLA can be a useful drug combination for coronary stent coating to suppress neointimal hyperplasia.     

A new vertical‐alignment LC mode with high‐transmittance and fast‐response‐time features

Abstract— A novel pixel design for vertical‐alignment LCDs with superior transmittance has been developed. The new liquid‐crystal mode, refered to as the hole‐induced vertical‐alignment mode (Hi‐VA), uses a via hole of an organic layer on a TFT substrate to achieve multi‐domain alignment. Compared to the conventional design, the Hi‐VA mode has a transmittance of up to 135% with a contrast ratio of 2000:1. Moreover, the new structure is free from ITO patterning or protrusion on the color‐filter side, which makes the fabrication process simple and low cost.     

Real-time resolution of self-intersection in dynamic cylindrical free-form deformation

This paper presents a method of self-intersection detection and resolution for dynamic cylindrical-lattice-based free-form deformation (FFD). The lattice-based approach allows efficient computation of deformation of complex geometries. But excessive deformation can cause visual anomalies such as surface infiltration and distortion. This paper derives a geometrically intuitive sufficient condition to guarantee that the FFD function is a homeomorphism and there is no self-intersection. The FFD function is defined by linear and quadratic B-Spline functions with the control points of the cylindrical lattice cell. The sufficient condition is satisfied if each trilinear function of the nine prism-shaped pentahedrons derived from the cell has a positive Jacobian determinant. The positivity is satisfied if the 12 tetrahedrons derived from the pentahedron have positive volumes. Based on the sufficient condition, the proposed method converts the self-intersection problem into a point-face collision detection and response problem suitable for dynamic simulation. The efficiency and accuracy of the self-intersection detection algorithm is analyzed and compared with a previous method. The results show that the proposed technique allows simulation of excessive deformation of tubular objects in an efficient and realistic manner.     

A dual‐polarized cylindrical conformal array antenna suitable for unmanned aerial vehicles

A dual‐polarized X‐band conformal array antenna is presented for unmanned aerial vehicles with polarimetric radars/sensors. Starting from the planar structure, the array antenna consisted of sixteen 2 × 2 subarrays is conformal to the cylinders with various curvature radii to fit the payload box of the airborne vehicle. The return losses are almost constant even if the curvature radius changes. Measured radiation patterns are compared with various curvatures at the same frequencies. The array can be easily placed on the aircraft payload or fuselage due to its ultra thin thickness, ultra lightweight, and conformal structure, which has potential airborne applications in polarimetric radar surveillance, remote sensing, and wireless communications. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.