Influence of rosemary-tocopherol/packaging combination on meat quality and the survival of pathogens in restructured irradiated pork loins

Irradiated restructured pork loins treated with rosemary-tocopherol/double-packaging had lower TBARS values than vacuum-packaged control after 10 days of refrigerated storage. The rosemary-tocopherol combination, however, had no effect on the production of sulfur volatiles responsible for the irradiation off-odor, and color changes in irradiated pork. V7/A3 double-packaging was effective in reducing the sulfur volatiles significantly. Rosemary-tocopherol combination was highly effective in reducing the volatile hexanal in irradiated restructure pork. Irradiation was effective in reducing Listeria monocytogenes and Salmonella typhimurium inoculated on the surface of restructured pork loin in dose-dependent manner. The irradiation D(10) values for L. monocytogenes and S. typhimurium were 0.58 and 0.55kGy, respectively. During the 20 days of refrigerated storage, L. monocytogenes in both nonirradiated and irradiated samples grew gradually, but the number of S. typhimurium decreased. The added rosemary-tocopherol, however, showed little bacteriocidal effects to L. monocytogenes and S. typhimurium.     

Measurement of neutron total cross-section and resonance parameters of xenon

We measured the neutron total cross-sections of natural xenon in the neutron energy region from 0.1 to 40 eV by using the time-of-flight method at the Pohang neutron facility, which consists of an electron linear accelerator, a water-cooled tantalum target with a water moderator, and a 12-m long time-of-flight path. A ⁶Li-ZnS(Ag) scintillator with a diameter of 12.5 cm and a thickness of 1.6 cm was used as a neutron detector. Notch filters composed of Co, In, Cd were used to estimate the background level and to calculate the neutron flight path length. The present measurement was compared with the existing experimental and the evaluated data. The resonance parameters of Xe isotopes were obtained from the transmission ratio by using the SAMMY code and were compared with other previous results.     

Effect of substrate on the risk of being washed away by floods for the Groundhoppers Tetrix subulata and Tetrix tenuicornis (Orthoptera: Tetrigidae)

Inundation zones of rivers are risky environments for terrestrial animals because of the regular or irregular occurrence of floods. Although animals in these zones have evolved several strategies to survive floods, behavioural anti‐flooding strategies have seldom been studied but could play an important role in their life history strategies. We previously reported that the groundhopper Tetrix tenuicornis moves to dense vegetation in response to low atmospheric pressure (which may signal rain and flooding) but prefers mossy microhabitats and bare ground under high atmospheric pressure. In the current study, we found that the ability of the semi‐aquatic groundhoppers T. tenuicornis and Tetrix subulata to withstand direct water flow was greater in patches of dense vegetation than in patches of moss or on bare ground. Even a relatively low water velocity led to water transport (presumably passive) of both species, perhaps because they lack arolia or other adhesive devices on their tarsi. This morphological limitation precludes vertical migration on vegetation, which is a common anti‐flooding strategy in insects. Our results suggest that, by moving to dense vegetation in response to drops in atmospheric pressure, groundhoppers may reduce their risk of being washed away by floods.     

Substance P,A Promising Therapeutic Target in Musculoskeletal Disorders

A large number of studies have focused on the role of substance P (SP) and the neurokinin-1 receptor (NK1R) in the pathogenesis of a variety of medical conditions. This review provides an overview of the role of the SP-NK1R pathway in the pathogenesis of musculoskeletal disorders and the evidence for its role as a therapeutic target for these disorders, which are major public health problems in most countries. To summarize, the brief involvement of SP may affect tendon healing in an acute injury setting. SP combined with an adequate conjugate can be a regenerative therapeutic option in osteoarthritis. The NK1R antagonist is a promising agent for tendinopathy, rheumatoid arthritis, and osteoarthritis. Research on the SP-NK1R pathway will be helpful for developing novel drugs for osteoporosis.     

Effect of heat-treatment temperature on carbon corrosion in polymer electrolyte membrane fuel cells

This study examines the effect of heat-treatment temperature on the electrochemical corrosion of carbon nanofibers (CNFs) in polymer electrolyte membrane (PEM) fuel cells. Corrosion is investigated by monitoring the generation of CO₂ using an on-line mass spectrometer at a constant potential of 1.4 V for 30 min. The experimental results show that the generation of CO₂ decreases with increasing heat-treatment temperature, indicating that less electrochemical carbon corrosion occurs. In particular, when the heat-treatment temperature is 2400 °C, the change intensifies. X-ray photoelectron spectroscopic analysis shows that oxygen functional groups on the carbon surface decrease with increasing heat-treatment temperature. A reduction in oxygen functional groups increases the hydrophobic nature of the carbon surface, which is responsible for the increased corrosion resistance of CNFs.     

Exergo‐economic analysis of micro pin fin heat sinks

A parametric study of thermoeconomic performance over four micro pin fin heat sinks of different spacing and shapes was conducted. Unit cost per product exergy, relative cost difference, and exergo‐economic factor were utilized to evaluate the thermoeconomic performance. The effect of working fluid on the thermoeconomic performance was also investigated using R‐123 and water as working fluids. Unit costs per product exergy were obtained to evaluate the product costs (total exergy change between exit and inlet streams) in micro pin fin heat sinks at fixed mass flow rate and fixed pressure drop. The results of the thermoeconomic analysis were compared with the results of a past exergy performance study by the author. In the light of raw experimental data acquired from the past studies of the author, important differences between the results of exergy and exergo‐economic performances were observed. It was found that the unit cost of exergy change decreased as electrical power increased and the relative cost difference approached to unity at high electrical powers (greater than 20 W). Moreover, high exergo‐economic factor values (more than 0.5) were obtained at low electrical powers while exergo‐economic factors had a small value at high electrical powers. When looking at the effect of the working fluid, higher cost per Watts of the products (up to the double of R‐123) was obtained with water compared with R‐123 at both fixed mass flow rate and pressure drop. No significant effect of pin fin spacing on the unit cost of exergy change was observed at fixed mass flow rate, while higher unit costs (up to 102%) were recorded at fixed pressure drop for scarcely packed pin fin heat sinks. Finally, the unit cost of exergy change was found to be independent of pin fin shape at fixed mass flow rate, whereas at fixed pressure drop, the hydrofoil‐based pin fin heat sink had higher unit costs (up to 1.8 times as much) when compared with the unit costs of pin fin heat sinks having flow separation promoting pin fins. Copyright © 2010 John Wiley & Sons, Ltd.     

Developing a custom DSP for vision based human computer interaction applications

Multimedia Tools and Applications - As the computing power of modern devices become greater, computer vision is increasingly adopted as the means of human-computer interaction. The industry is...     

DADE: a fast data anomaly detection engine for kernel integrity monitoring

The Journal of Supercomputing - In computer systems, ensuring the integrity of the kernel assumes importance as attacks against the kernel allow an adversary to obtain the highest privilege within...     

Design,synthesis, and characterization of hybrid micro-nano surface coatings for enhanced heat transfer applications

Metal particles coating is extensively used for surface coating a wide range of application including thermal management of electronics, concentrating photovoltaics, sensors and nuclear power plants. Both micro and nano-scale surfaces have been proven to show an enhanced two-phase heat transfer performance by varying surface properties like area, wettability, and roughness. To combine the unique features of both micro and nano-scale surface coatings, this study presents the design, synthesis, and characterization of new hybrid micro-nano scale surface coating by a new two steps approach. Five different types of surfaces; namely, plain nanocoated (PNC), uniform micro-porous (UMP), uniform hybrid micro-nano porous (UHMNP), 2-D modulated microporous (MMP) and modulated hybrid micro-nano (MHMNP) surfaces were fabricated. A new two steps approach of hot-pressing followed by nucleate boiling is used for the fabrication of these surfaces. Successful coating of hybrid micro-nano scale coating was achieved. Considering the critical surface properties of micro and nanoscale coatings, new hybrid micro-nano surfaces have been characterized for SEM, wettability, roughness test. The comparative analysis of these new hybrid coating is also performed with micro coated and uncoated surfaces. With the coating of nanoparticles, the average roughness of PNC surface increased by 4.67 times and that of hybrid micro-nano particle surface by 2.3 times. The deposition of nanoparticles resulted in an increase in contact angle for PNC surface, while the contact angle of hybrid micro-nano surfaces decreases from 126.4° to 82.1°.