Monoterpenoid content of sage grouse ingesta

We tested the hypothesis that the monoterpenoid levels in the ingesta from various digestive organs of sage grouse are less than that expected from the big sagebrush leaves ingested. Results supported the hypothesis. Dramatic reductions occurred between the gizzard and duodenum. Monoterpenoid levels in the ceca were nil; thus adverse effects of monoterpenoids on ceca microbes would also be nil.The use of trade or firm names in this paper is for reader information and does not imply endorsement by the U.S. Department of Agriculture of any product or service.     

Correction to: The Implications of Post-Fire Physical Features of Cylindrical 18650 Lithium-Ion Battery Cells

Fire Technology - The original publication of the article unfortunately contained a mistake in Figure 2c.     

Compendium of photovoltaic degradation rates

Published data on photovoltaic (PV) degradation measurements were aggregated and re‐examined. The subject has seen an increased interest in recent years resulting in more than 11 000 degradation rates in almost 200 studies from 40 different countries. As studies have grown in number and size, we found an impact from sampling bias attributable to size and accuracy. Because of the correlational nature of this study we examined the data in several ways to minimize this bias. We found median degradation for x‐Si technologies in the 0.5–0.6%/year range with the mean in the 0.8–0.9%/year range. Hetero‐interface technology (HIT) and microcrystalline silicon (µc‐Si) technologies, although not as plentiful, exhibit degradation around 1%/year and resemble thin‐film products more closely than x‐Si. Several studies showing low degradation for copper indium gallium selenide (CIGS) have emerged. Higher degradation for cadmium telluride (CdTe) has been reported, but these findings could reflect a convolution of less accurate studies and longer stabilization periods for some products. Significant deviations for beginning‐of‐life measurements with respect to nameplate rating have been documented over the last 35 years. Therefore, degradation rates that use nameplate rating as reference may be significantly impacted. Studies that used nameplate rating as reference but used solar simulators showed less variation than similar studies using outdoor measurements, even when accounting for different climates. This could be associated with confounding effects of measurement uncertainty and soiling that take place outdoors. Hotter climates and mounting configurations that lead to sustained higher temperatures may lead to higher degradation in some, but not all, products. Wear‐out non‐linearities for the worst performing modules have been documented in a few select studies that took multiple measurements of an ensemble of modules during the lifetime of the system. However, the majority of these modules exhibit a fairly linear decline. Modeling these non‐linearities, whether they occur at the beginning‐of‐life or end‐of‐life in the PV life cycle, has an important impact on the levelized cost of energy. Copyright © 2016 John Wiley & Sons, Ltd.     

A comparison of SWAT, HSPF and SHETRAN/GOPC for modelling phosphorus export from three catchments in Ireland

Recent extensive water quality surveys in Ireland revealed that diffuse phosphorus (P) pollution originating from agricultural land and transported by runoff and subsurface flows is the primary cause of the deterioration of surface water quality. P transport from land to water can be described by mathematical models that vary in modelling approach, complexity and scale (plot, field and catchment). Here, three mathematical models (soil water and analysis tools (SWAT), hydrological simulation program-FORTRAN (HSPF) and système hydrologique Européen TRANsport (SHETRAN)/grid oriented phosphorus component (GOPC)) of diffuse P pollution have been tested in three Irish catchments to explore their suitability in Irish conditions for future use in implementing the European Water Framework Directive. After calibrating the models, their daily flows and total phosphorus (TP) exports are compared and assessed. The HSPF model was the best at simulating the mean daily discharge while SWAT gave the best calibration results for daily TP loads. Annual TP exports for the three models and for two empirical models were compared with measured data. No single model is consistently better in estimating the annual TP export for all three catchments.     

Experimental study of ignited unsteady hydrogen releases from a high pressure reservoir

In order to simulate an accidental hydrogen release from the high pressure pipe system of a hydrogen facility a systematic study on the nature of transient hydrogen jets into air and their combustion behavior was performed at the KIT hydrogen test site HYKA. Horizontal unsteady hydrogen jets from a reservoir of 0.37 dm³ with initial pressures of up to 200 bar have been investigated. The hydrogen jets released via round nozzles 3, 4, and 10 mm were ignited with different ignition times and positions. The experiments provide new experimental data on pressure loads and heat releases resulting from the deflagration of hydrogen–air clouds formed by unsteady turbulent hydrogen jets released into a free environment. It is shown that the maximum pressure loads occur for ignition in a narrow position and time window. The possible hazard potential arising from an ignited free transient hydrogen jet is described.     

Wave structure in Stokes' second problem for a dipolar fluid with nonclassical heat conduction

Summary The classical heat conduction law of Fourier associates an infinite speed of propagation to a thermal disturbance in a material body. Such behavior is a violation of the causality principle. In recent years, several modifications of Fourier's heat law have been proposed. In this work, a modified form of Fourier's heat law, based on the Maxwell-Cattaneo-Fox (MCF) model, is used to analyze the heat conduction effects in Stokes' second problem for a dipolar fluid. The structure of the waves and the influence of the dipolar constants on the velocity field is investigated. These results are then compared to the viscous fluid case. In addition, the displacement thickness and skin friction at the plate are determined.     

Evaluation and assessment of lumbar load during total shifts for occupational manual materials handling jobs within the Dortmund Lumbar Load Study – DOLLY

The load on the lumbar spine during occupational manual materials handling was previously investigated with respect to short activity sections or to specified load-handling types such as lifting or carrying. Within the so-called Dortmund Lumbar Load Study, analysis of the occupationally induced load on the lumbar spine during total working shifts in the field of surface construction, drop forge, industrial meat processing, and refuse collection was performed on the shop-floor. The body postures adopted, the action forces applied at the hands, and the resultant lumbar load for all load-handling tasks were analysed for 2 shifts in each field on the basis of video evaluations. Via a newly developed detailed classification procedure, the spatial position of the body segments as well as amplitude and direction of the action forces were described in a detailed manner. Consecutive biomechanical model calculations lead, for total shifts, to time courses of various measures for the load on the lumbar spine, such as flexion or torsional moments of force as well as compression and shear forces at the lumbosacral disc. In relation to recommended limits for the maximal disc compression provided in the literature, lumbar load is exceeded in numerous situations during a shift, in particular, with regard to persons of higher age. In a “dose model” applied in this study, the cumulative effect of single-task exposures was considered by superproportional weighting of the compressive force with respect to the corresponding duration of a working task.

Relevance to industry

A comprehensive evaluation of lumbar load for complete shifts is presented considering the real shop-floor conditions. Analyses for dustbin removal, surface construction and industrial meat processing have discovered numerous exceedings of lumbar-load limits. Such tasks should not be performed by older persons from the preventive point of view.     

LIQHYSMES storage unit – Hybrid energy storage concept combining liquefied hydrogen with Superconducting Magnetic Energy Storage

A new energy storage concept for variable renewable energy, LIQHYSMES, has been proposed which combines the use of LIQuid HYdrogen (LH2) with Superconducting Magnetic Energy Storage (SMES). LH2 with its high volumetric energy density and, compared with compressed hydrogen, increased operational safety is a prime energy carrier for large scale stationary energy storage. But balancing load or supply fluctuations from seconds to several hours with hydrogen alone is difficult due to the response times of the flow control, and an additional short-term electrical energy storage will be needed. For this purpose a compact LIQHYSMES Storage Unit is proposed which integrates the H2 liquefaction part, the LH2 tank and the SMES based on Magnesium Diboride and cooled by the LH2 bath. This allows jointly utilizing the cryogenic infrastructure and reducing the otherwise significant H2 liquefaction losses by introducing a novel process with “cold recovery”. Preliminary target numbers for this process, key parameters for a complete LIQHYSMES model plant, simulations on the anticipated buffering behaviour, a loss analysis and a crude cost estimate are given.     

Consumer neuroscience: Assessing the brain response to marketing stimuli using electroencephalogram (EEG) and eye tracking

Application of neuroscience methods to analyze and understand human behavior related to markets and marketing exchange has recently gained research attention. The basic aim is to guide design and presentation of products to optimize them to be as compatible as possible with consumer preferences. This paper investigates physiological decision processes while participants undertook a choice task designed to elicit preferences for a product. The task required participants to choose their preferred crackers described by shape (square, triangle, round), flavor (wheat, dark rye, plain) and topping (salt, poppy, no topping). The two main research objectives were (1) to observe and evaluate the cortical activity of the different brain regions and the interdependencies among the Electroencephalogram (EEG) signals from these regions; and (2) unlike most research in this area that has focused mainly on liking/disliking certain products, we provide a way to quantify the importance of different cracker features that contribute to the product design based on mutual information. We used the commercial Emotiv EPOC wireless EEG headset with 14 channels to collect EEG signals from participants. We also used a Tobii-Studio eye tracker system to relate the EEG data to the specific choice options (crackers). Subjects were shown 57 choice sets; each choice set described three choice options (crackers). The patterns of cortical activity were obtained in the five principal frequency bands, Delta (0–4 Hz), Theta (3–7 Hz), Alpha (8–12 Hz), Beta (13–30 Hz), and Gamma (30–40 Hz). There was a clear phase synchronization between the left and right frontal and occipital regions indicating interhemispheric communications during the chosen task for the 18 participants. Results also indicated that there was a clear and significant change (p < 0.01) in the EEG power spectral activities taking a place mainly in the frontal (delta, alpha and beta across F3, F4, FC5 and FC6), temporal (alpha, beta, gamma across T7), and occipital (theta, alpha, and beta across O1) regions when participants indicated their preferences for their preferred crackers. Additionally, our mutual information analysis indicated that the various cracker flavors and toppings of the crackers were more important factors affecting the buying decision than the shapes of the crackers.