A Study of Ozone Generation by Negative Corona Discharge Through Different Plasma Chemistry Models

The Steady radial distribution of chemical species in a wire‐to‐cylinder ozone generator filled with pure oxygen has been computed by applying four different plasma chemistry models of increasing complexity. The most complete model considers ten species (e, O₂ ⁺, O₂ ^?, O₃ ^?, O^?, O₂, O₂(¹Δ_g), O₂(¹∑_g ⁺), O and O₃) and 79 reactions, including ionization by electron impact, electron attachment and detachment, electron-ion recombination, charge transfer, etc. The chemical model is coupled with the electrical model through Poisson's equation. The spatially averaged ozone density has been computed as a function of the current intensity and compared with the experimental values obtained by UV spectroscopy.     

Design optimization of 3D steel structures: Genetic algorithms vs. classical techniques

In this paper an elitist genetic algorithm (GA) developed by the authors is compared with common commercial solutions for complex structural optimization. After its prior validation on two-dimensional (2D) structures, the GA was tuned and improved in order to obtain structural elements with minimum weights that satisfy the ultimate limit states of the applicable building code. Subsequently, the same spatial structures were optimized using a commercial structural analysis program. Finally, the cost and weight improvements obtained using the GA, although at a higher computational cost, are discussed.     

Downhole Upgrading of Extra-heavy Crude Oil Using Hydrogen Donors and Methane Under Steam Injection Conditions

An extra-heavy crude oil underground upgrading process is described which involves the downhole addition of a hydrogen donor additive under steam injection conditions (280-315°C and residence times of at least 24-h). Laboratory experiments showed a 4° increase in the API gravity (from 9 to 12°) of the upgraded product, a two-fold reduction in the viscosity and, an approximately 8% decrease in the asphaltene content with respect to the original crude. Further increases on the temperature led to products with improved properties reaching 15°API at 315°C. It was found that the presence of the natural formation (catalysts) and methane (natural gas) is necessary to enhance the properties of the upgraded crude oil. From GC and GC-MS results a reaction pathway is proposed that involves hydrogen transfers from tetralin to the extra-heavy crude oil resulting in the formation of 1,2-dihydronaphthalene. This compound is then transformed into naphthalene, further upgrading of crude oil through hydrogen donation. The results of the experiments carried out in the presence and absence of the mineral formation and with an inert solid (SiC) strongly indicate that the former acts as a catalyst and not as a heat transfer matrix. Isotopic labeling studies (CD₄ and ¹³CH₄) give evidences that, most probably, methane is involved in the upgrading reactions.     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Inspection and Process of Tension of Cables of General Rafael Urdaneta Bridge

In 1997 and 1999, inspection works were carried out in the 384 cable stays of the six central piers of General Rafael Urdaneta Bridge, located in Maracaibo, Venezuela. Inspection indicated the presence of water and significant settlings in the sockets of the cables and corrosion along each cable and socket. The tension of the cables was also measured, and differences of up to 30% in the tension of the cables of some of the 24 groups corresponding to the six central piers (four groups of 16 for each pier) were found. The results suggested the need to retension the cables. This paper shows the outcome of the inspection and indicates the procedure and results of the process of retension, finished in July 2000.     

Experimental Investigation of the Recovery of Soaked Paper Using Evaporative Freeze Drying

The aim of this article is to develop an experiment and a procedure to investigate the restoration of water-damaged paper and archival materials using freeze drying in order to allow a reproducible test and comparison of the influence of different operating conditions on drying time and restored paper quality. Firstly, a reproducible method for the preparation of soaked samples simulating water-damaged paper has been developed. Then, the samples have been freeze-dried in a laboratory-scale apparatus that allowed monitoring the temperature as well as the weight of the samples. The technique of evaporative freezing, which reduces the drying time required, has been used in this case. An innovative procedure for the visualization of the progress of the drying process has been validated, thus allowing the validation of a simple phenomenological model of the time evolution of the ice core volume; in addition, data on the residual moisture of the dried paper sheets in different zones have been given. Finally, optimization of this particular drying process by using simple or more sophisticated approaches has been discussed.     

Development of intelligent multisensor surveillance systems with agents

Intelligent multisensor surveillance systems consist of several types of sensors, which are installed on fixed and mobile devices. These components provide a huge quantity of information that has to be contrasted, correlated and integrated in order to recognize and react on special situations. These systems work in highly dynamic environments, with severe security and robustness requirements. All these characteristics imply the need for distributed solutions. In these solutions, scattered components can decide and act with some degree of autonomy (for instance, if they become isolated), or cooperate and coordinate for a complete tracking of special situations. In order to cope with these requirements and to better structure the solution, we have decided to design surveillance system control as a multiagent system. This is done by applying an agent-orientated methodology, which is assessed with concrete scenarios.     

Lyapunov analysis of the approximate motion equations of flexible structures

In this paper, the effectiveness of the approximate motion equations of a flexible structure, obtained by the RitzKantorovich method, is analysed by using Lyapunov functions. The analysis, which is restricted to the case of a single flexible beam for the sake of simplicity, is carried out under the assumption that a partial dissipation is present, affecting only the first degrees of freedom of the system. By means of suitable Lyapunov functions, an overbounding estimate of the quadratic approximation error is determined as a decreasing function of the approximation order. The analysis is completed by considering the two ‘extreme’ cases: the theoretical absence of dissipation and the presence of structural dissipation, affecting all the infinite degrees of freedom.