Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

Thermal expansion characteristics of a titanium modified austenitic stainless steel: measurement by high-temperature X-ray diffraction and modelling using Grüneisen formalism

The thermal expansion of a titanium modified, swelling resistant austenitic stainless steel designated as D9 is studied by measuring the lattice parameter as a function of temperature in the range 300-1300 K by high-temperature X-ray diffraction technique. The thermal expansion data thus obtained is in reasonable agreement with the typical thermal expansion values reported for similar nuclear grade austenitic stainless steels. However, at temperatures exceeding 900 K, the measured thermal expansivity exhibits a pronounced non-linear increase due partly to the precipitation of complex carbide and intermetallic phases. The high-temperature thermal expansion data obtained in the present study are augmented by modelling the low-temperature thermal expansion behaviour by Grüneisen formalism.     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.     

Thermodynamics of gas-solid flow

New thermodynamic fundamentals for vertical pneumatic conueying are proposed with derivation based strictly on mass conservation and continuum concept. For a 1-D, vertical, steady gas-solid flow, these new mass and energy balances allowed the derivation of a new nondimensional energy factor containing the pressure drop. This energy factor correlated quite well with the difference between the inlet gas velocity and solids terminal velocity, when tested against high-pressure, 15-m-high, vertical pneumatic transport data from Institute of Gas Technology. The energy factor was also checked against atmospheric-pressure data of the 5-m lift line of the Pennsylvania State Uniuersity. The new energy factor covers quite well both the atmospheric- and high-pressure sets of data (923 tests) including two heights, lean- and dense-phase transports, several pipe diameters, broad and narrow particle-size distributions, and different materials. The dissipation terms in gas-solid flow were also clearly identified.     

Extrusion-rotomolding of plasticized PVC formulations

In this work, we present a novel process to produce plasticized PVC articles. Plasticized PVC dispersion resin (dry blend) was extruded and poured into a hot mold. The mold was transferred to a rotomolding machine, where the final geometry was obtained. Formulations using commercial PVC suspension resin and three different types of plasticizers were prepared under different processing conditions. The physical appearance of the articles and the tensile properties of the materials were evaluated.     

In-situ-Messung der Stickoxidkonzentration in turbulenten Diffusionsflammen

Zusammenfassung Die laserspektroskopischen Me?methoden laserinduzierte Fluoreszenz und spontane Ramanspektroskopie werden eingesetzt zur Messung der Konzentrationen von Stickoxid, Hydroxyl sowie der chemischen Hauptkomponenten und der Temperatur. Betrachtet wird die thermische Umsetzung von Wasserstoff mit Luftsauerstoff. Es wird die experimentelle Vorgehensweise und Problematik dargestellt. Ebenso wird der Weg der Modellierung und Berechnung turbulenter Verbrennungsvorg?nge am konkreten Beispiel skizziert. Die Annahme chemischen Gleichgewichts stellt sich als ungenügend in der Berechnung der Stickoxid- und Hydroxylkonzentrationen heraus. Eine deutlich bessere Vorhersage wird durch Einführen einer Reaktionsfortschrittsvariablen für das chemische Modell erreicht.     

From the individual element test to finite element templates: Evolution of the patch test

This paper starts a sequence of three articles that follow an unconventional approach in finite element research. The ultimate objective is to construct high-performance elements and element-level error estimators for those elements. The approach takes off from our previous work in high-performance elements and culminates with the development of finite element templates. The present paper concentrates on the patch test and evolved versions of the test that have played a key role in this research. Following a brief review of the historical roots, we present the Individual Element Test (IET) of Bergan and Hanssen in an expanded context that encompasses several important classes of new elements. The relationship of the IET to the multielement forms A, B and C of the patch test and to the single-element test are investigated. An important consequence of the IET application is that the element stiffness equations decompose naturally into basic and higher-order parts. The application of this decomposition to the “sanitization” of the non-convergent BCIZ element is described and verified with numerical experiments. Two sequel papers in preparation are subtitled ‘the algebraic approach’ and ‘element-level error estimation’. These apply the fundamental decomposition to the derivation of templates for specific mechanical elements and to the construction of element-level error estimators, respectively.     

An overview of FDA medical device regulation as it relates to deep brain stimulation devices.

The United States Food and Drug Administration (FDA) is charged with assuring the safety and effectiveness of a variety of medical products and the FDA's Center for Devices and Radiological Health is responsible for premarket and postmarket regulation of medical devices. In this paper, we review--from device classification and clinical studies to the final marketing application--FDA's premarket requirements and postmarket requirements as they relate to deep brain stimulation devices.     

A computational study of LP-based heuristic algorithms for two-dimensional guillotine cutting stock problems

In this paper we develop and compare several heuristic methods for solving the general two-dimensional cutting stock problem. We follow the Gilmore-Gomory column generation scheme in which at each iteration a new cutting pattern is obtained as the solution of a subproblem on one stock sheet. For solving this subproblem, in addition to classical dynamic programming, we have developed three heuristic procedures of increasing complexity, based on GRASP and Tabu Search techniques, producing solutions differing in quality and in time requirements. In order to obtain integer solutions from the fractional solutions of the Gilmore-Gomory process, we compare three rounding procedures, rounding up, truncated branch and bound and the solution of a residual problem. We have coded and tested all the combinations of algorithms and rounding procedures. The computational results obtained on a set of randomly generated test problems show their relative efficiency and allow the potential user to choose from among them, according to the available computing time. Rceived: January 9, 2001 / Accepted: December 10, 2001     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002