2‐(1‐Ethynylpyrene)‐Adenosine as a Folding Probe for RNA—Pyrene in or out

A series of short RNA duplexes containing one or two 1‐ethynylpyrene‐modified adenine bases was synthesised. The melting behaviour of these duplexes was examined by monitoring temperature‐dependent pyrene fluorescence. In the singly modified RNA duplexes, the bases flanking the ethynylpyrene‐rA were varied to examine the sequence specificity of the fluorescence change of pyrene upon RNA hybridisation. Because an increase in pyrene fluorescence upon melting of the duplex can be correlated with intercalation of pyrene, and a decrease is usually associated with the position of pyrene outside the strand, a relationship between the flanking bases and the tendency of the dye to intercalate has been established. It was found that pyrene intercalation is less likely to take place if the modified base is flanked only by A–U base pairs. Flanking G–C base pairs, even only in the 5′‐direction of the modified base, will favour intercalation. In addition, we examined a doubly modified compound that had a pyrene located on each strand. The spectra indicated that the two pyrenes were close enough for interaction. Upon melting of the strand, a fluorescence blue shift corresponding to the dissociation of the pyrene–pyrene complex could be observed in addition to the intensity effect already known from the singly modified compounds. Two melting curves based on the different properties of the fluorophore could be extracted, leading to different melting points corresponding to the global duplex melting and to the change of local pyrene environment, respectively.     

Complexing agent assisted synthesis of high aspect ratio Fe3 +/Mg2 + layered double hydroxides

A new, facile synthesis for Fe^3 +/Mg^2 + LDHs is developed and investigated. The crucial feature of the synthesis is the usage of a complexing agent (diethylenetriamine, DETA) to increase the solubility of iron phases precipitated intermediately. The influences of different synthesis parameter like DETA concentration, pH value, and temperature are investigated. The optimized synthesis route yields high aspect ratio Fe^3 +/Mg^2 + LDHs which are expected to be interesting filler materials for flame retardant nanocomposites.     

A new technique to derive particle size distributions and aerosol number concentrations directly from thermophoretic data

The manufacture of many high value-added powders takes place by the decomposition of gaseous precursors in aerosol tube reactors. Historically, process improvements were achieved by making changes on the outside of the reactor and observing what comes out at the end of the pipe. The development of increasingly accurate aerosol dynamics models based on engineering first principles has been limited because models were typically validated on integral properties of ex situ product, instead of particle properties measured at multiple positions inside the reactor. In this study, a model reactor was equipped to capture samples thermophoretically from 15 internal positions. Additional in-line measurements were achieved with a multi-stage inertial impactor and by traditional analysis of ex situ product. Calculations were performed to verify that thermophoresis was the dominant mechanism of particle capture. The thermophoretic samples were analyzed by electron beam microscopy and image analysis to develop particle size distributions at each of the internal positions inside the reactor. An approximation of Talbot's Equation for thermophoretic velocity allowed experimental measurements to be combined with thermophoretic sample data to give predictions of particle number concentration corresponding to the precise sampling locations. The combinations of particle size distributions and number concentrations provide powerful insights on particle nucleation and growth dynamics.     

Self‐assembled structures in polystyrene‐block‐polyisoprene‐blend‐polystyrene and polystyrene‐block‐poly(methyl methacrylate)‐blend‐polystyrene or ‐blend‐poly(methyl methacrylate) in the strong segregation regime

This study deals with the investigation of microphase‐separated morphology and phase behaviour in blends of polystyrene‐block‐polyisoprene with homopolystyrene and blends of polystyrene‐block‐poly(methyl methacrylate) with homopoly(methyl methacrylate) or homopolystyrene in the strong segregation regime using small‐angle X‐ray scattering and transmission electron microscopy as a function of composition, molecular weight of homopolymers, r_M and temperature. Parameter r_M = M_H/M_C (where M_H is the molecular weight of homopolymer and M_C that of the corresponding block copolymer) was selected to encompass behaviour of the chains denoted as a ‘wet brush’ (i.e. r_M < 1). The relative domain spacing D/D_o increases in the regime 0 < r_M?1 with increasing concentration of homopolymer w_P and increasing r_M but depends on the specific implemented morphology. We tested a new approximate D/D_o versus w_P relation in the strong segregation regime using block copolymers of high molecular weights. It is shown that the parameters r_M and χ^3/2N determine the slope of the D/D_o versus w_P relation in the strong segregation regime and the new approximation generally matches the experimental data better than the approximations used so far. Copyright © 2010 Society of Chemical Industry     

Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature

The fracture resistance behaviour of a doped lead zirconate titanate (PZT) ceramic after combined thermo-mechanical loading is investigated between room temperature (RT) and 400 °C, i.e. above the Curie temperature (T_C). The thermal- and stress-induced depolarisation effects due to domain switching have been assessed by the indentation method on bulk PZTs. This has been extended to multilayered actuators. Experimental findings show a depolarisation effect with the temperature, which is significantly enhanced when combined with mechanical loading. This partial or even full depolarisation of the PZT material below T_C leads to important anisotropy effects in the fracture resistance of the piezo-ceramic, which should be taking into account in the design of multilayer actuators where the direction of crack propagation (i.e. parallel or normal to electrodes) can affect the actuator functionality.     

Structure and properties of plasma sprayed BaTiO3 coatings

Plasma spraying enables to create layers with thickness in a millimeter range adhering on various substrates. This paper provides a study of electric and mechanical properties of BaTiO₃ coatings prepared by atmospheric plasma spraying. The spraying was carried out by a direct current gas-stabilized plasma gun. BaTiO₃ was fed into the plasma jet as a feedstock powder prepared by a reactive sintering of micrometer-sized powders of BaCO₃ and TiO₂. Microstructure and phase composition are reported and discussed in connection with electric and mechanical properties. The ability of the used techniques to detect precisely the phase transformation temperatures of BaTiO₃ plasma sprayed coatings is discussed as well. A depth-sensing indentation measurement was done between 290 and 520 K to provide local mechanical characterization. The elastic modulus has shown slightly higher values than that reported typically in papers focused on BaTiO₃ ferroelectric thin films. The average Vickers microhardness is tested to characterize the samples in larger scale. A wear resistance in a slurry environment is reported as well. Dielectric properties are reported for the temperature window of existence of the tetragonal ferroelectric phase. Relative permittivity and loss factor are studied at frequency from 50 Hz to 1 MHz and temperature from 260 to 400 K.     

Characterization of glow‐discharge–treated cellulose acetate membrane surfaces for single‐layer enzyme electrode studies

Cellulose acetate membranes (CA) were modified by means of plasma polymerization of ethylene diamine (EDA) and n‐butylamine (n‐BA). The motivation for this work was the application of a modified membrane for the single‐layer enzyme electrode. A tubular reactor with the external radiofrequency (13.56 MHz) excitation was used. Surface modification was performed at 5, 10, and 15 W power (at 27 Pa working pressure) for 5, 10, 15 min. Modified surfaces were characterized in detail by FTIR–ATR, XPS (ESCA), contact angle, and enzyme immobilization activity. The best treatment results were obtained for EDA with 5 W and 30 min and 15 W and 10 min. These results are discussed using surface analysis data. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1341–1352, 2001     

Working Memory Capacity and the Antisaccade Task: Individual Differences in Voluntary Saccade Control.

Performance on antisaccade trials requires the inhibition of a prepotent response (i.e., don't look at the flashing cue) and the generation and execution of a correct saccade in the opposite direction. The authors attempted to further specify the role of working memory (WM) span differences in the antisaccade task. They tested high- and low-span individuals on variants of prosaccade and antisaccade trials in which an eye movement is the sole requirement. In 3 experiments, they demonstrated the importance of WM span differences in both suppression of a reflexive saccade and generation of a volitional eye movement. The results support the contention that individual differences in WM span are not exclusively due to differences in inhibition but also reflect differences in directing the focus of attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-capacity quantum key distribution using Chebyshev-map values corresponding to Lucas numbers coding

We propose an approach that achieves high-capacity quantum key distribution using Chebyshev-map values corresponding to Lucas numbers coding. In particular, we encode a key with the Chebyshev-map values corresponding to Lucas numbers and then use k-Chebyshev maps to achieve consecutive and flexible key expansion and apply the pre-shared classical information between Alice and Bob and fountain codes for privacy amplification to solve the security of the exchange of classical information via the classical channel. Consequently, our high-capacity protocol does not have the limitations imposed by orbital angular momentum and down-conversion bandwidths, and it meets the requirements for longer distances and lower error rates simultaneously.