Influence of fretting on the fatigue strength at the vise clamp-specimen interface

Fretting fatigue is one of the most important phenomena for inducing a significant reduction of fatigue strength and consequently, leading to unexpected failure accidents of the engineering structures even at very low stresses. In the present study, both plain and fretting fatigue tests with zero mean stress were carried out on two different types of steel, low-carbon steel and martensitic stainless steel, by means of a reversed bending fatigue testing machine. The drop in the fatigue strengths through fretting at vise clamp-specimen interface were significant for both tested steels. The fretting processes produced a reduction in fatigue strength of about 27% for low-carbon steel and 16% for martensitic stainless steel.     

Environmental effects on ductile-phase toughening in Nb5Si3-Nb composites

A variety of materials have been toughened via the addition of a ductile phase. Brittle silicide intermetallics such as Nb₅Si₃ have been significantly toughened by niobium particles incorporated during in-situ processing techniques. In the work described here, toughness tests conducted on Nb₅Si₃ were monitored in a scanning electron microscope to view the process of toughening provided by the niobium particles. In particular, the behavior of the ductile phase was monitored and related to the toughness obtained. In an attempt to vary the behavior of the ductile phase, the composite materials were exposed to a variety of gaseous environments and subsequently tested in air. The resulting toughness, resistance-curve behavior, and in-situ results highlight the importance of the behavior of the ductile phase on subsequent properties.     

Visual masking and visual integration across saccadic eye movements.

Studied visual masking and visual integration across saccadic eye movements in 4 experiments. In a 5th experiment, 4 randomly chosen dots from a 3?×?5 dot matrix were presented in 1 fixation, and 4 different dots from the matrix were presented in a 2nd fixation. Ss reported the location of the missing dot. When the 1st display was presented just before the saccade (as in Exps I–III), Ss accurately specified the missing dot location when the dots were presented to the same region of the retina but not when they were presented in the same place in space. When the 1st display was presented well before the saccade (as in Exp IV), Ss performed poorly regardless of retinal or spatial overlap. Results indicate the existence of a short-lived retinotopic visual persistence but provide no support for a spatiotopic visual persistence capable of fusing the contents of successive fixations. It is concluded that transsaccadic integration depends instead on an abstract memory that accumulates position and identity information about the contents of successive fixations. Results are discussed in relation to the work by M. L. Davidson et al (see record 1974-10245-001). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Oxygen Tracer Diffusion in Vitreous Silica

Oxygen diffusion in vitreous silica glass is studied using the gas exchange technique. The tracer concentration profiles are consistent with a model based on two mechanisms, one network and the other interstitial. These processes are coupled through limited network–interstitial exchange. Nuclear reaction analysis and secondary ion mass spectrometry techniques are performed and compared. These results are compared to experiments on transport in thin silica films grown on single-crystal silicon.     

Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242

This paper develops an experimentally validated computational model based on crystal plasticity for the analysis of two-phase α/β Ti-6242 polycrystalline alloys. A rate-dependent elastic-crystal plasticity model is incorporated in this model to accommodate anisotropy in material behavior and tension-compression asymmetry inherent to this alloy. A combination of microtesting, orientation imaging microscopy, computational simulations, and minimization process, involving genetic algorithms, is implemented in this study for careful characterization and calibration of the material parameters. Size effects are considered in this analysis through a simple scaling process. A homogenized equivalent model of the primary α with transformed β colonies is developed for incorporation in the Ti-6242 FE model. The polycrystalline Ti-6242 computational model incorporates accurate phase volume fractions, as well as statistically equivalent orientation distributions to those observed in the orientation imaging microscopy scans. The effects of orientation, misorientations, and microtexture distributions are investigated through simulations by this computational model. The model is used to simulate constant strain rate and creep tests in compression and tension, and the results are compared with experiments. The effects of microstructure and creep-induced load-shedding on the localization of microstructural stresses and strains are studied for potential crack initiation criteria.     

A kinematic analysis of the modified flight telerobotic servicer manipulator system

A reverse analysis of a 6 degree of freedom (dof) subchain of a modified 7 dof flight telerobotic servicer (FTS) manipulator system is presented. The 6 dof subchain is designated as a TR-RT* chain. At the outset, it was considered that the reverse analysis would be similar to a TTT manipulator analyzed previously for which the third and fourth joints intersect at a finite point. This was not, however, the case and a sixteenth-degree tan-half-angle polynomial was derived for the TR-RT manipulator. The elimination procedure is interesting and much simpler than the procedures for the general case.     

Co-evolution as a computational and cognitive model of design

Co-evolutionary design has been developed as a computational model that assumes two parallel search spaces: the problem space and the solution space. The design process iteratively searches each space using the other space as the basis for a fitness function when evaluating the alternatives. Co-evolutionary design can also be developed as a cognitive model of design by characterizing the way in which designers iteratively search for a design solution, making revisions to the problem specification. This paper presents the computational model of co-evolutionary design and then describes a protocol study of human designers looking for evidence of co-evolution of problem specifications and design solutions. The study shows that co-evolutionary design is a good cognitive model of design and highlights the similarities and differences between the computational model and the cognitive model. The results show that the two kinds of co-evolutionary design complement each other, having strengths in different aspects of the design process. Electronic Publication     

Microstructure and thermal behavior of Sn-Zn-Ag solders

The microstructure and thermal behavior of the Sn-Zn-Ag solder were investigated for 8.73–9% Zn and 0–3.0% Ag. The scanning electron microscopy (SEM) analysis shows the Ag-Zn compound when the solder contains 0.1% Ag. X-ray diffraction (XRD) analysis results indicate that Ag₅Zn₈ and AgZn₃ become prominent when the Ag content is 0.3% and above. Meanwhile, the Zn-rich phase is refined, and the Zn orientations gradually diminish upon increase in Ag content. The morphology of the Ag-Zn compound varies from nodular to dendrite structure when the Ag content increases. The growth of the Ag-Zn compounds is accompanied by the diminishing of the eutectic structure of the Sn-9Zn solder. Differential scanning calorimetry (DSC) investigation reveals that the solidus temperature of these solders exists at around 198°C. A single, sharp exothermic peak was found for the solders with Ag content less than 0.5%. Liquidus temperatures were identified with the DSC analysis to vary from 206°C to 215°C when the Ag content ranges from 1.0% to 3.0%     

Prediction of foam growth and its nucleation in free and limited expansion

The influence volume approach (IVA) is often utilized for modeling the mass transfer process dictating bubble growth dynamics in physical foaming. However, the assumed concentration profile in the IVA method is only valid when the changes in dissolved gas concentration are small (less than 5%). In addition, the validity of the IVA method is difficult to justify in chemical foaming applications because of the difficulties involved in defining the dissolved gas concentration profile.In the present work, we define two distinct stages of bubble growth for physical foaming. These two stages are termed as free and limited expansion and are controlled by the bubble nucleation rate. Bubble nucleation is assumed to occur only in the free expansion stage. In this stage, the bubble pressure drops substantially from an initially high pressure in the supersaturated state while the dissolved gas concentration changes very little. The second stage of our two-stage mass transfer model is termed the limited expansion stage and accounts for bubble growth in the late stages of foam evolution, when the pressure changes become small. However, in the limited stage of bubble growth the dissolved gas concentration drops significantly, as the available dissolved gas is depleted. To summarize our two-stage mass transfer model of foam expansion, the pressure difference between the bubble phase and the liquid phase is the primary mechanism for driving mass transfer in the early (free) stages of foam growth and the concentration difference is the driver for bubble growth in the late (limited) stages of growth. The first stage can be regarded as the nucleation stage and it is relatively short; while the second stage can be regarded as the bubble growth stage and is much longer. Most of the bubble volume expansion takes place in the second stage.The concentration gradient at the bubble edge, which is often ignored in other models, is analyzed in detail in this paper. The details of our novel mass transfer model are also presented.