Hydrogels based on graft copolymers of collagen synthesis

Graft copolymerization of 2-hydroxyethyl methacrylate in combination with hydrophobic monomers onto soluble collagen was employed in the synthesis of hydrogels. The hydrogels were formed by simultaneous graft copolymerization and crosslinking. In order to study the effect of various crosslinking agents on the water retention character of the hydrogels, three different crosslinking agents, namely, N,N′-methylene bis acrylamide, 1,4-butanediol dimethacrylate, and hexamethylene urethanediacrylate were used. Hexamethylene urethanediacrylate crosslinked systems require a minimum amount of crosslinking agent to attain maximum water content in comparison to the other systems.     

Axial pressure profiles in non-newtonian flow: Part I: Theoretical and experimental considerations

The flow behavior of polymeric fluids in tubes can be determined from measurements of the radial stress profile in the flow direction. This subject, the focus of our research, will be examined in Part II of this communication. Part I describes a research designed to test the accuracy of stress measurement with pressure transducers in a variety of recess mount geometries. No mount geometry errors were detected for the fluids used in this work over a shear rate range of 1 to 2000 sec^?1. Part I also contains a survey of the literature and theoretical considerations pertinent to the entire work.     

Modification of industrial polypropylene film by grafting of poly(acrylic acid)

Grafting of poly(acrylic acid) onto commercial polypropylene films following irradiation by γ-rays was carried out in order to improve their surface properties. The amount of grafting with the irradiation dose was found not to follow the expected linear dependence as it is normally observed for polypropylene films prepared in laboratory amounts. We therefore analyzed the influence of the industrial manufacture process in terms of orientation of the film and addition of antioxidants by determining the peroxide surface density and the extent of grafting therefrom. The unoriented polypropylene film presented the highest peroxide concentration and was thus the most adapated material for successful grafting. Whereas phenol antioxidants limit the peroxide formation and thus must be removed from the film for grafting, the thickness of the chemical modification and can be controlled by means of phosphites. Atomicforce microscopy and wettability measurements showed that the grafted poly(acrylic acid) was heterogeneously distributed on the surface of the film, explaining the observed low reproducibility of the grafting reaction. However, we observed that the polarity of the surface was increased by the grafting. © 1995 John Wiley & Sons, Inc.     

Studies on the cure characteristics and vulcanizate properties of 50/50 NR/SBR blend

Blends of 50/50 natural rubber (NR) and styrene-butadiene rubber (SBR) are vulcanized using several conventional and semi-EV systems. The cure characteristics and vulcanizate properties are compared. The quantity and quality of crosslinks in each case are deciphered by chemical probes to correlated them with the vulcanizate properties.     

采用间苯二酚-甲醛树脂优化钢丝帘线粘合

新品种的间苯二酚-甲醛树脂中的游离间苯二酚含量极低，且不再具有吸湿性。考察了间苯二酚-甲醛树脂(Penacolite B-20-S)、硼酰化钴和不溶性硫黄的用量对钢丝粘合胶与镀铜钢丝粘合性能的影响。结果表明，树脂／钴盐粘合体系比单纯的钴盐粘合体系的粘合性能好得多。仅考虑粘合性能时，粘合体系最佳配方为：Penacolite B-20-S树脂4，硼酰化钴(活性钴)0．1，不溶性硫黄(活性)7．1，HMMM(活性)2．66。     

High temperature swelling of coal/tetralin mixtures in a high pressure microdilatometer

High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min^{− 1} under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments.     

Measuring Software Screen Complexity: Relating Eye Tracking,Emotional Valence,and Subjective Ratings

Enterprise software pages, routinely used to conduct a variety of business-relevant tasks, must be clear and nonconfusing to experienced end users. A study was conducted to consider the impact of several page design factors (background gradient, font, and font size) on perceived ratings of page clarity, completion time, emotional valence (EV) from video, and several eye-tracking parameters. Twenty professional managers each completed 25 tasks on enterprise web pages designed with specific combinations of these factors. Highly rated pages had Tahoma and Larger fonts, compared to Calibri and Smaller fonts. The Gradient background did not influence ratings but did increase the search area and completion time. Although EV was not a sensitive measure across tasks, it was influenced by font differences in the first few seconds of page presentation. Overall, the use of background gradient was not supported, but both Tahoma and Larger fonts were supported for these enterprise pages.     

Conductivité électrique totale du systeme iodure d'argent-diiodure de diazonia-6,9-dispiro[5.2.5.3]heptadecane

Résumé La réaction entre l'homopipérazine, HN<(CH₂)₅>NH, et le dibromo-1,5-pentane, Br(CH₂)₅Br, conduit à la formation du dibromure de diazonia-6,9-dispiro[5.2.5.3]heptadécane de formule C₁₅H₃₀N ₂ ²⁺ ·2Br^–. Par permutation en milieu aqueux ou organique on obtient le sel iodé. Ce diiodure est associé à l'iodure d'argent dans des proportions variant entre 75 et 95% en équivalent de AgI. L'étude de la conductivité électrique totale de ce système en fonction de la température montre que le sel double renfermant 82,5% en équivalent de AgI présente, à 25°C, une conductivité électrique totale de 0,0083 ( cm)^–1.

---

The reaction between homopiperazine, HN<(CH₂)₅>NH, and dibromo-1,5-pentane, Br(CH₂)₅Br, gives a diazonia-6,9-dispiro[5.2.5.3]heptadecane dibromide, C₁₅H₃₀N ₂ ²⁺ ·2Br^–. This salt is iodized by permutation in aqueous or organic solution. This diiodide is associated with silver iodide in proportions varying between 75 and 95% equivalent silver iodide. The study of the total electric conductivity shows that the double salt, containing 82.5% equivalent silver iodide, gives a conductivity of 0.0083 ( cm)^–1 at 25°C.

     

Light-sensitive elastomers modified by 4-(N-dimethylmaleimido)-benzenesulphenyl chloride

New light-sensitive polymers were prepared by modification of four different elastomers with 4-(N-dimethylmaleimido)-benzenesulphenyl chloride (DMI-BSCI). Polydienes modified by DMI-BSCI form block copolymers. These polymers show a strong increase of the glass transition temperature T_g whereby the T_g increase of modified poly(octenamer) is much smaller. Higher modified polydienes have two T_g. Modified poly(octenamers) show a melting temperature dependence T_m on the content of trans double bonds which is characteristic of statistical copolymers. The ratio of rate constants with which trans- and cis-structures in poly(octenamer) are occupied by DMI-BSCI, is

$\text{k}{}_{\mathrm{trans}}\text{k}{}_{\mathrm{cis}}\text{= 0.34}$

     

The role of the automation development group in analytical research and development at Dupont Merck

Laboratory robotics has been firmly established in many non-QC laboratories as a valuable tool for automating pharmaceutical dosage form analysis. Often a single project or product line is used to justify an initial robot purchase thus introducing robotics to the laboratory for the first time. However, to gain widespread acceptance within the laboratory and to justify further investment in robotics, existing robots must be used to develop analyses for existing manual methods as well as new projects beyond the scope off the original purchase justification. The Automation Development Group in Analytical Research and Development is a team of analysts primarily devoted to developing new methods and adapting existing methods for the robot. This team approach developed the expertise and synergy necessary to significantly expand the contribution of robotics to automation in the authors'' laboratory.