Non-encapsulated thermo-liquid crystals for digital particle tracking thermography/velocimetry in microfluidics

The ever accelerating state of technology has powered an increasing interest in heat transfer solutions and process engineering innovations in the microfluidics domain. In order to carry out such developments, reliable heat transfer diagnostic techniques are necessary. Thermo-liquid crystal (TLC) thermography, in combination with particle image velocimetry, has been a widely accepted and commonly used technique for the simultaneous measurement and characterization of temperature and velocity fields in macroscopic fluid flows for several decades. However, low seeding density, volume illumination, and low TLC particle image quality at high magnifications present unsurpassed challenges to its application to three-dimensional flows with microscopic dimensions. In this work, a measurement technique to evaluate the color response of individual non-encapsulated TLC particles is presented. A Shirasu porous glass membrane emulsification approach was used to produce the non-encapsulated TLC particles with a narrow size distribution and a multi-variable calibration procedure, making use of all three RGB and HSI color components, as well as the proper orthogonally decomposed RGB components, was used to achieve unprecedented low uncertainty levels in the temperature estimation of individual particles, opening the door to simultaneous temperature and velocity tracking using 3D velocimetry techniques.     

Invasive species detection in Hawaiian rainforests using airborne imaging spectroscopy and LiDAR

Remote sensing of invasive species is a critical component of conservation and management efforts, but reliable methods for the detection of invaders have not been widely established. In Hawaiian forests, we recently found that invasive trees often have hyperspectral signatures unique from that of native trees, but mapping based on spectral reflectance properties alone is confounded by issues of canopy senescence and mortality, intra- and inter-canopy gaps and shadowing, and terrain variability. We deployed a new hybrid airborne system combining the Carnegie Airborne Observatory (CAO) small-footprint light detection and ranging (LiDAR) system with the Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) to map the three-dimensional spectral and structural properties of Hawaiian forests. The CAO-AVIRIS systems and data were fully integrated using in-flight and post-flight fusion techniques, facilitating an analysis of forest canopy properties to determine the presence and abundance of three highly invasive tree species in Hawaiian rainforests.

The LiDAR sub-system was used to model forest canopy height and top-of-canopy surfaces; these structural data allowed for automated masking of forest gaps, intra- and inter-canopy shadows, and minimum vegetation height in the AVIRIS images. The remaining sunlit canopy spectra were analyzed using spatially-constrained spectral mixture analysis. The results of the combined LiDAR-spectroscopic analysis highlighted the location and fractional abundance of each invasive tree species throughout the rainforest sites. Field validation studies demonstrated < 6.8% and < 18.6% error rates in the detection of invasive tree species at  7 m² and  2 m² minimum canopy cover thresholds. Our results show that full integration of imaging spectroscopy and LiDAR measurements provides enormous flexibility and analytical potential for studies of terrestrial ecosystems and the species contained within them.     

A relational–XML data warehouse for data aggregation with SQL and XQuery

Integrating information from multiple data sources is becoming increasingly important for enterprises that partner with other companies for e‐commerce. However, companies have their internal business applications deployed on diverse platforms and no standard solution for integrating information from these sources exists. To support business intelligence query activities, it is useful to build a data warehouse on top of middleware that aggregates the data obtained from various heterogeneous database systems. Online analytical processing (OLAP) can then be used to provide fast access to materialized views from the data warehouse. Since extensible markup language (XML) documents are a common data representation standard on the Internet and relational tables are commonly used for production data, OLAP must handle both relational and XML data. SQL and XQuery can be used to process the materialized relational and XML data cubes created from the aggregated data. This paper shows how to handle the two kinds of data cubes from a relational–XML data warehouse using extract, transformation and loading. Copyright © 2008 John Wiley & Sons, Ltd.     

Delineating Boundaries for Imprecise Regions

In geographic information retrieval, queries often name geographic regions that do not have a well-defined boundary, such as “Southern France.” We provide two algorithmic approaches to the problem of computing reasonable boundaries of such regions based on data points that have evidence indicating that they lie either inside or outside the region. Our problem formulation leads to a number of subproblems related to red-blue point separation and minimum-perimeter polygons, many of which we solve algorithmically. We give experimental results from our implementation and a comparison of the two approaches. This research is supported by the EU-IST Project No. IST-2001-35047 (SPIRIT) and by grant WO 758/4-2 of the German Research Foundation (DFG).     

Chaotic frequency scaling in a coupled oscillator model for free rhythmic actions

The question of how best to model rhythmic movements at self-selected amplitude-frequency combinations, and their variability, is a long-standing issue. This study presents a systematic analysis of a coupled oscillator system that has successfully accounted for the experimental result that humans' preferred oscillation frequencies closely correspond to the linear resonance frequencies of the biomechanical limb systems, a phenomenon known as resonance tuning or frequency scaling. The dynamics of the coupled oscillator model is explored by numerical integration in different areas of its parameter space, where a period doubling route to chaotic dynamics is discovered. It is shown that even in the regions of the parameter space with chaotic solutions, the model still effectively scales to the biomechanical oscillator's natural frequency. Hence, there is a solution providing for frequency scaling in the presence of chaotic variability. The implications of these results for interpreting variability as fundamentally stochastic or chaotic are discussed.     

Financial time-series analysis with rough sets

We investigate the use of the rough set model for financial time-series data analysis and forecasting. The rough set model is an emerging technique for dealing with vagueness and uncertainty in data. It has many advantages over other techniques, such as fuzzy sets and neural networks, including attribute reduction and variable partitioning of data. These characteristics can be very useful for improving the quality of results from data analysis. We demonstrate a rough set data analysis model for the discovery of decision rules from time series data for example, the New Zealand stock exchanges. Rules are generated through reducts and can be used for future prediction. A unique ranking system for the decision rules based both on strength of the rule and stability of the rule is used in this study. The ranking system gives the user confidence regarding their market decisions. Our experiment results indicate that the forecasting of future stock index values using rough sets obtains decision ruleswith high accuracy and coverage.     

Structural study of titanium oxide films synthesized by ion beam-assisted deposition

The application of titanium dioxide (TiO(2)) films as surgical implant coatings for antibiotic attachment depends crucially on their available surface area and thus their surface morphology and crystallinity. Here, we report our fabrication of high Wenzel ratio TiO(2) films targeted to increase the film surface area using the ion beam-assisted deposition (IBAD) technique at high-deposition temperatures (approximately 610 degrees C). The modulation of the films' surface morphology was accomplished by varying the chemical identity of the concurrent ion beams bombarded on the films during the e-beam evaporation process. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were employed to investigate the surface morphology of the as-deposited films. X-ray diffractometry (XRD) revealed that these nanocrystalline films primarily consist of anatase phase TiO(2). Wenzel ratio, the ratio of the actual surface area to the projected area, of IBAD films prepared with argon, oxygen, and nitrogen ion beams was measured to be 1.52, 1.31 and 1.49, respectively. The effect of the differences in chemical reactivity and ion size of these three type ion beams are discussed to explain the present results.     

Correlation of slurry reactor Fischer-Tropsch yield data

First stage slurry reactor Fischer-Tropsch (FT) yield data from Mobil's two-step pilot plant operations for the DOE have been correlated using a modified Schulz-Flory approach but allowing for changes in the probability of chain growth, , at key product molecular weights. Triple values of are invoked to explain (1) the high methane yield and (2) the very broad molecular weight distribution of the wax fraction, as compared to (3) moderate values of ₂ of between 0.79 and 0.85 for the C₂–C₂₀ hydrocarbons. Over this range, wax yields from 10 to 76 wt% are accommodated, at values of ₃ from 0.90 to 0.98. The second break in the yield-molecular weight curve occurs at the carbon number where most of the component remains in the reactor as liquid rather than leaving as vapor product. It is assumed that this is a function of vapor-liquid equilibrium. The correlation has proven useful in developing a computer model of the FT synthesis loop which is part of a baseline design and economic study for DOE/PETC.     

Speech Separation Methodology for Hearing Aid

In the design of hearing aids (HA), the real-time speech-enhancement is done. The digital hearing aids should provide high signal-to-noise ratio, gain improvement and should eliminate feedback. In generic hearing aids the performance towards different frequencies varies and non uniform. Existing noise cancellation and speech separation methods drops the voice magnitude under the noise environment. The performance of the HA for frequency response is non uniform. Existing noise suppression methods reduce the required signal strength also. So, the performance of uniform sub band analysis is poor when hearing aid is concern. In this paper, a speech separation method using Non-negative Matrix Factorization (NMF) algorithm is proposed for wavelet decomposition. The Proposed non-uniform filter-bank was validated by parameters like band power, Signal-to-noise ratio (SNR), Mean Square Error (MSE), Signal to Noise and Distortion Ratio (SINAD), Spurious-free dynamic range (SFDR), error and time. The speech recordings before and after separation was evaluated for quality using objective speech quality measures International Telecommunication Union -Telecommunication standard ITU-T P.862.