Hydrogels based on graft copolymers of collagen synthesis

Graft copolymerization of 2-hydroxyethyl methacrylate in combination with hydrophobic monomers onto soluble collagen was employed in the synthesis of hydrogels. The hydrogels were formed by simultaneous graft copolymerization and crosslinking. In order to study the effect of various crosslinking agents on the water retention character of the hydrogels, three different crosslinking agents, namely, N,N′-methylene bis acrylamide, 1,4-butanediol dimethacrylate, and hexamethylene urethanediacrylate were used. Hexamethylene urethanediacrylate crosslinked systems require a minimum amount of crosslinking agent to attain maximum water content in comparison to the other systems.     

High temperature swelling of coal/tetralin mixtures in a high pressure microdilatometer

High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min^{− 1} under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments.     

Living carbocationic polymerization

Conventional cationic polymerization can be converted into living carbocationic polymerization (LC^⊕Pzn) by the introduction of common anion into the charge. Thus the conventional polymerization of isobutylene (IB) induced by the 2-chloro-2,4,4-trimethylpentane (TMPCl)/TiCl₄ combination yields LC^⊕Pzn of IB upon the addition of tetrabutyl ammonium chloride (n-Bu₄NCl), most likely due to then-Bu₄NCl+TiCl₄ ?n-Bu₄N^⊕+TiCl ₅ ^⊕ equilibrium. A kinetic model has been developed and tested which corroborates these propositions. By this model we have gained for the first time quantitative insight into the quasiliving equilibrium.     

Characterizing the deformation of cold-rolled copper sheet

An advanced x-ray diffraction technique allows the development of texture components to be monitored and provides supplementary information about the cold work and residual stresses in cold-rolled copper sheet. The new technique confirms the results of an ultrasonic test, except for the ultrasonic test’s sensitivity to grain size. The new x-ray diffraction technique could be adapted to provide in-process, nondestructive evaluation of thin copper sheet, even for material moving at high speeds.     

Delineating Boundaries for Imprecise Regions

In geographic information retrieval, queries often name geographic regions that do not have a well-defined boundary, such as “Southern France.” We provide two algorithmic approaches to the problem of computing reasonable boundaries of such regions based on data points that have evidence indicating that they lie either inside or outside the region. Our problem formulation leads to a number of subproblems related to red-blue point separation and minimum-perimeter polygons, many of which we solve algorithmically. We give experimental results from our implementation and a comparison of the two approaches. This research is supported by the EU-IST Project No. IST-2001-35047 (SPIRIT) and by grant WO 758/4-2 of the German Research Foundation (DFG).     

Selective toxicity of hydroxyl-rich carbon nanodots for cancer research

Nano Research - The toxicity of nanoparticles in a biological system is an integration of effects arising from surface functionality, particle size, ionic dissolution, etc. This complexity suggests...     

Usability engineering for augmented reality: employing user-based studies to inform design

A major challenge, and thus opportunity, in the field of human-computer interaction and specifically usability engineering is designing effective user interfaces for emerging technologies that have no established design guidelines or interaction metaphors or introduce completely new ways for users to perceive and interact with technology and the world around them. Clearly, augmented reality is one such emerging technology. We propose a usability engineering approach that employs user-based studies to inform design, by iteratively inserting a series of user-based studies into a traditional usability engineering lifecycle to better inform initial user interface designs. We present an exemplar user-based study conducted to gain insight into how users perceive text in outdoor augmented reality settings and to derive implications for design in outdoor augmented reality. We also describe lessons learned from our experiences conducting user-based studies as part of the design process.     

QDENSITY—A Mathematica Quantum Computer simulation

This Mathematica 5.2 package¹ is a simulation of a Quantum Computer. The program provides a modular, instructive approach for generating the basic elements that make up a quantum circuit. The main emphasis is on using the density matrix, although an approach using state vectors is also implemented in the package. The package commands are defined in Qdensity.m which contains the tools needed in quantum circuits, e.g., multiqubit kets, projectors, gates, etc. Selected examples of the basic commands are presented here and a tutorial notebook, Tutorial.nb is provided with the package (available on our website) that serves as a full guide to the package. Finally, application is made to a variety of relevant cases, including Teleportation, Quantum Fourier transform, Grover's search and Shor's algorithm, in separate notebooks: QFT.nb, Teleportation.nb, Grover.nb and Shor.nb where each algorithm is explained in detail. Finally, two examples of the construction and manipulation of cluster states, which are part of “one way computing” ideas, are included as an additional tool in the notebook Cluster.nb. A Mathematica palette containing most commands in QDENSITY is also included: QDENSpalette.nb.

Program summary

Title of program: QDENSITYCatalogue identifier: ADXH_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADXH_v1_0Program available from: CPC Program Library, Queen's University of Belfast, N. IrelandOperating systems: Any which supports Mathematica; tested under Microsoft Windows XP, Macintosh OS X, and Linux FC4Programming language used: Mathematica 5.2No. of bytes in distributed program, including test data, etc.: 180 581No. of lines in distributed program, including test data, etc.: 19 382Distribution format: tar.gzMethod of solution: A Mathematica package is provided which contains commands to create and analyze quantum circuits. Several Mathematica notebooks containing relevant examples: Teleportation, Shor's Algorithm and Grover's search are explained in detail. A tutorial, Tutorial.nb is also enclosed.     

Bronchoalveolar lavage. Quantitation of intraalveolar fluid?

A precise calculation of the amount of intraalveolar fluid is the basis of a quantitative analysis of intraalveolar compounds. Different approaches have been made to cover this important problem. Here, we report a comparative study with five markers: 99mTc-DTPA, 51Cr-EDTA, inulin, urea, and methylene blue in animal experiments as well as in human experiments. The marker substances were added to the lavage fluid, and the "dilution" of the markers, i.e., the alveolar fluid, was calculated. The results showed that in animals with healthy lungs the tracer methods are able to calculate amounts of intraalveolar fluid that are comparable to morphologic findings. In animals as well as in humans, methylene blue and inulin were shown to be useless in determining alveolar fluid volume compared with the tracer methods. In humans, the calculations with the urea method and with Tc-DTPA were in the same magnitude, but there was no individual correlation. We conclude that, at present, the methods to quantitate alveolar fluid volume lack precision and add nothing to a deeper understanding of alveolar biology.     

Ignitable Liquid Classification and Identification Using the Summed-Ion Mass Spectrum

Abstract

The mass spectra calculated by summing the intensities of each nominal mass over all chromatographic times, the summed ion spectra, were calculated for a set of 440 commercially available ignitable liquids that had been analyzed by gas chromatography–mass spectrometry. Each ignitable liquid is generally comprised of a mixture of chemicals, and the mixtures may be very complex in some cases, e.g., petroleum distillates, gasoline, etc. The summed ion spectra were evaluated to determine if they contained sufficient information content to allow their use for rapid and accurate identification of the ignitable liquid in a database or library. The summed ion nominal mass spectra were encoded in one bit per channel at 1% transition intensity and a set of 96,580 unique pairwise comparisons were made between spectra, resulting in an average of approximately 50 differing channels per comparison. A subset of 62 summed ion spectra were further compared by a similarity metric and found by cluster analysis to group closely along the ASTM ignitable liquid classification scheme. Receiver operator characteristic analysis of the use of the similarity index in combination with the summed ion spectra was shown to provide 99% probability of correct liquid identification and 95% probability of correct ASTM classification by primary and sub-class. Interlaboratory tests found 95% probability of correct liquid identification and 85% probability of correct ASTM classification at the primary class level. These results demonstrate the use of the summed ion spectrum as a first step in the rapid identification of an ignitable liquid by database or library searching.