SENEQUE: a multi-scaling GIS interface to the Riverstrahler model of the biogeochemical functioning of river systems

The Riverstrahler model describes the biogeochemical functioning of an entire river system, from 100 to 100,000 km(2) or more, taking into account the constraints set by the morphology of the drainage network, the meteorological/hydrological conditions, and the inputs of material from point and non-point sources in the watershed. This tool has been applied for research purpose to several river systems differing in terms of hydrological regime and anthropogenic influences. In order to improve its capabilities and its generic dimension, as well as to develop a user-friendly interface allowing its transfer to non-specialist users including managers, the model has been coupled to a GIS interface. This gives the user the possibility to visualize the available geospatial database, to select the best geographical representation of the drainage network, to automatically prepare the corresponding input files required for the model, to pilot the model calculation and to visualize the results. The coupling with a GIS interface has considerably improved the capabilities of the Riverstrahler model. The code of the model is now entirely generic and can be run on any river system for which a suitable database is available. Its spatial resolution can be adapted to the requirement of the relevant problem, from the highest level, where each elementary watershed is individualized, to the lower level, where the whole basin is idealized as one basin with tributaries of each order having the same characteristics. As an illustration of the new potentialities offered by the coupling of Riverstrahler with a GIS through the SENEQUE interface, the results of a same modeling scenario are compared at different spatial resolutions. For the first time, with on-line coupling to a geodatabase, the effect of increasing the spatial resolution of the drainage network representation on the performance of the Riverstrahler model has been examined. At the outlet of the basin, the water quality results were found invariant to a large degree, whatever the details of its representation in the calculations. This result justifies the use of a low resolution representation of the upstream watershed when results are required only at the outlet of the basin.     

Wear resistance of chromium oxide nanostructured coatings

Nanostructured plasma-sprayed chromium oxide ceramic coatings, with a higher wear resistance than coatings obtained using micrometric powder as starting material have been developed. The influence of the starting powder, i.e. Cr₂O₃ fused crushed powders and Cr₂O₃ nanopowders having grains size of 100 nm, has been investigated. The nanopowders are reconstituted into spherical micrometer sized granules by the spray-drying process before plasma spraying. It is shown that due to their specific microstructure the wear resistance of the nanostructured coatings is more than 20 times higher compared to the coatings obtained using micrometric powder.     

Impact of direct solar irradiance on heat transfer behind an open-jointed ventilated cladding: Experimental and numerical investigations

This paper is based on the study of an experimental wooden-framed house, equipped with a ventilated cladding, located in France. The focus is on investigating the heat transfer taking place in the ventilated air gap behind the cladding and on estimating their impact on heat transfer in the insulated part of the walls.Preliminary CFD simulation made it possible to describe the airflow in the ventilated air gap when buoyancy was acting as the main driving force. It was found that the airflow velocity could reach 0.8 m s^?1, when exposed to 570 W m^?2 solar irradiance. This was verified experimentally. A correlation to assess airflow rate in the air gap behind the cladding has been developed based on temperature differences and on experimental conclusions. The correlation is adapted to energy performance simulation and efficiently represents the average cavity airflow at different height for various irradiance and temperature conditions.     

Effect of Heating Rate on Phase and Microstructural Evolution During Pressureless Sintering of a Nanostructured Transition Alumina

Deagglomeration of a nanocrystalline transition alumina performed using different techniques was first demonstrated to be active in the achievement of a better powder compaction ability under uniaxial pressing and consequently in the development of a highly dense and homogeneous microstructure during pressureless sintering. A major effect, however, was associated to the heating rate chosen during the densification cycle. In fact, the influence of different heating rates (10°C/min or 1°C/min) on phase and microstructural evolution during sintering was investigated in depth on the above best green bodies. A low-rate thermal cycle leads to a significant reduction of the α-Al₂O₃ crystallization temperature and promotes a more effective particle rearrangement during phase transformation. As a consequence, in the low-rate treated material, it was possible to avoid the development of a vermicular structure as usually expected during the densification of a transition alumina and to yield a more homogenously fired microstructure.     

Identification of retroviral late domains as determinants of particle size

Retroviral Gag proteins, in the absence of any other viral products, induce budding and release of spherical, virus-like particles from the plasma membrane. Gag-produced particles, like those of authentic retrovirions, are not uniform in diameter but nevertheless fall within a fairly narrow distribution of sizes. For the human immunodeficiency virus type 1 (HIV-1) Gag protein, we recently reported that elements important for controlling particle size are contained within the C-terminal region of Gag, especially within the p6 sequence (L. Garnier, L. Ratner, B. Rovinski, S.-X. Cao, and J. W. Wills, J. Virol. 72:4667-4677, 1998). Deletions and substitutions throughout this sequence result in the release of very large particles. Because the size determinant could not be mapped to any one of the previously defined functions within p6, it seemed likely that its activity requires the overall proper folding of this region of Gag. This left open the possibility of the size determinant residing in a subdomain of p6, and in this study, we examined whether the late domain (the region of Gag that is critical for the virus-cell separation step) is involved in controlling particle size. We found that particles of normal size are produced when p6 is replaced with the totally unrelated late domain sequences from Rous sarcoma virus (contained in its p2b sequence) or equine infectious anemia virus (contained in p9). In addition, we found that the large particles released in the absence of p6 require the entire CA and adjacent spacer peptide sequences, whereas these internal sequences of HIV-1 Gag are not needed for budding (or proper size) when a late domain is present. Thus, it appears the requirements for budding are very different in the presence and absence of p6.     

Isolation of DNA from the uncultured "Candidatus Liberobacter" species associated with citrus Huanglongbing by RAPD

"Candidatus Liberobacter," the uncultured bacterium associated with citrus Huanglongbing (HLB) disease, is an alpha-Proteobacteria, and two species, "Candidatus L. africanum" and "Candidatus L. asiaticum, " have been characterized by sequence analysis of the 16S rDNA and beta operon (rplKAJL-rpoBC) genes. These genes were isolated by PCR and random cloning of DNA from infected plants. However, this strategy is laborious and allowed selection of only three Liberobacter DNA fragments. In this paper, we described isolation of additional genes using Random Amplified Polymorphic DNA (RAPD). In total, 102 random 10-mer primers were used in PCR reactions on healthy and Liberobacter-infected plant DNA. Eight DNA bands amplified from infected plant DNA were cloned and analyzed. Six of them were found to be part of the Liberobacter genome by sequence and hybridization experiments. On these DNA fragments, four genes were identified: nusG, pgm, omp, and a hypothetical protein gene. These results indicate that RAPD can be used to clone DNA of uncultured organisms.     

Identification and Control of an Industrial Binary Distillation Column: A Case Study

The challenging problem of identification and control of an industrial binary distillation column is addressed in this paper. Process identification represents an alternative to modeling and is shown to be the appropriate procedure for predictive control design. The predictive controllers based on the identified model ensure stability and high performance for a wide operating range of the industrial distillation column.