Improving the Safety and Efficiency of Materials Transfer at a Construction Site by Using an Elevator

The aim of this study was to compare materials transfer at a construction site, either by carrying manually or by using an elevator. Data were collected at a construction site by using two methods: continuous automatic collection of data on the use of the elevator, and measuring and observing the transportation of some products when different delivery systems were used. Health and safety risks were at their highest when transporting products manually at construction sites. Risks decrease when vertical (an elevator) and horizontal (a wheeled device) transportation tools are used. A similar improvement as in health and safety risks can be seen in efficiency results: The working time needed with the elevator was 41% of the purely manual handling time. When wheeled devices were used, the transportation time was decreased to 16%. The early use of a permanent elevator succeeded well and its capacity was large enough. The effective use of the elevator and wheeled devices require that pathways are in better condition than normally.     

Business-to-business integration: Applicability,benefits and barriers in the telecommunications industry

This paper statistically analyzes applicability of business-to-business integration (B2Bi), benefits from and barriers to electronic data interchange (EDI) and RosettaNet between major original equipment manufacturers and European operators in the telecommunications industry. Based on coordination costs and nine business processes, frequency of the business process and timeliness required in the business process have clearer positive influences on applicability of B2Bi than does accuracy required in the business process. Complexity of the business process does not have such a positive relation to this applicability. Comparison of 12 benefits and eight barriers between EDI and RosettaNet shows no considerable differences. RosettaNet yields only slightly higher direct benefits than EDI, whereas all indirect benefits from RosettaNet are significantly higher than indirect benefits from EDI. Surprisingly, barriers to RosettaNet are not lower than barriers to EDI although only a lack of knowledge on EDI or RosettaNet is a significantly higher barrier to RosettaNet.     

A new approach for determining the hidden material parameters of a honeycomb

An optimization method to obtain the cell wall properties of Nomex honeycomb material is presented. There, the outcomes of physical experiments and micromechanical simulations are compared in an effort to identify the geometric or/and material parameters for the best match. Only the cell wall thickness and Young’s modulus, called here as the hidden parameters, are used in the matching as the Young’s modulus is difficult measure reliably. The mean values and standard deviations of the geometric parameters of the cell structure model are obtained through image analysis. In the micromechanical model used, the cell walls are considered as linearly elastic Bernoulli beams. The optimum hidden parameter values for the Nomex case turn out not to be unique but they appear in a combination known as the bending stiffness.     

Experimental studies on mechanical properties of cellular structures using Nomex® honeycomb cores

An experimental method is presented to obtain the effective in-plane compliance matrices of cellular structures using Nomex® honeycomb cores without a priori assumptions such as orthotropy. In this method, firstly, uni-axial tension tests are carried out for different material orientations. The independent variables in these experiments are the material orientation and displacement of the actuator, while the main dependent variables are positions of the marker points and the force acting on the specimens. Marker tracking technique is used to determine the marker positions which are processed to get strain of the measuring domain, while the stress is estimated through external loading and core geometry. The analysis is confined to the measuring domain under near homogeneous stress and strain fields. The experiment results are processed with transformation and least squares functions to obtain all effective in-plane elastic parameters, which are compared with analytical solution based on deformation of idealized cell structure. Through this comparison, the effects of geometrical parameters of cell structure are discussed in detail. By means of the introduced method, the problem of lack of experimental studies on the effective in-plane compliances of cellular structures in the literature is expected to be solved.     

Phonons in slow motion: dispersion relations in ultrathin Si membranes

We report the changes in dispersion relations of hypersonic acoustic phonons in free-standing silicon membranes as thin as ～8 nm. We observe a reduction of the phase and group velocities of the fundamental flexural mode by more than 1 order of magnitude compared to bulk values. The modification of the dispersion relation in nanostructures has important consequences for noise control in nano- and microelectromechanical systems (MEMS/NEMS) as well as opto-mechanical devices.     

Efficient current reuse for low-power transceivers

Current boosting is a method where the performance of an active circuit block is optimized by placing a constant current source in parallel with the active signal path to provide optimal biasing for different components. In this paper, a technique to replace the constant dc current source with active building blocks typically required in transceivers is proposed. By using this method the total current consumption of the transceiver can be efficiently reduced without modifying its performance. A design example where the proposed technique reduces the receiver current consumption by 45% is given.     

Indoor Climate and the Performance of Ventilation in Finnish Residences

The purpose of the study was to gather information about the actual ventilation and indoor air quality and to evaluate the differences between houses and apartments with different ventilation systems. A sample of 242 dwellings in the Helsinki metropolitan area was studied over periods of no weeks during the 1988-1989 heating season. The mean air-exchange rates had a high variation (average 0.52 l/h, range 0.07-1.55 l/h). The ASHRAE minimum value of 0.35 l/h was not achieved in 28% of the dwellings. The air-exchange rates were significantly her in the houses than in the apartments (averages 0.45/0.64 l/h, p < 0.001); in the natural ventilation systems they, were slightly her than in the mechanical systems. The average temperature in the bedrooms was approximately 22 °C (range 18–27 °C), slightly but significantly higher in the apartment than in the houses. The average dust depositions were higher in the balanced ventilation systems than in the other systems. The median radon concentration was 82 Bq/m³ (range 5-866 Bq/m³); the Finnish target value of 200 Bq/m³ was exceeded in 17% of the houses but in none of the apartment. The measurements indicate that the indoor air quality in Finnish dwellings is not always satisfactory with reference to human health and comfort.     

Authors' reply to Bukowski's comments

VTT-Fire Technology Laboratory     

Nuclear ferromagnetic ordering in silver at negative nanokelvin temperatures

Nuclear ferromagnetic ordering in silver, caused by the antiferromagnetic Ruderman-Kittel interactions, has been observed at negative absolute temperatures T>–1.9 nK. The ordered states, reached by adiabatic demagnetization after population inversion at initial entropies Sc=0.82 ln2, are described by a saturation of susceptibility to –1 and by nonhysteretic response to an external field. These observations are consistent with the domain configurations calculated by Viertiö and Oja in the mean field theory. The experimental critical entropy, however, does not agree with theoretical calculations. In addition to our NMR measurements leading to these findings, we also discuss basic thermodynamics at T<0 and the theoretically calculated domain configurations in simple terms.