Impact of Cr3C2/VC addition on the dry sliding friction and wear response of WC–Co cemented carbides

Two grades of WC–10 wt.%Co cemented carbide with or without addition of Cr₃C₂/VC grain growth inhibitor during liquid phase sintering were produced with the goal to investigate their reciprocating sliding friction and wear behaviour against WC–6 wt.%Co cemented carbide under unlubricated conditions. The tribological characteristics were obtained on a Plint TE77 tribometer using distinctive normal contact loads. The generated wear tracks were analyzed by scanning electron microscopy and quantified topographically using surface scanning equipment. The post-mortem obtained wear volumes were compared to the online assessed wear. Correlations between wear volume, wear rate and coefficient of friction on the one hand and sliding distance and microstructural properties on the other hand were determined, revealing a significant influence of Cr₃C₂/VC on the friction characteristics and wear performance.     

All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites

All-cellulose composites (ACCs) were prepared by partial dissolution in ionic liquid and compared to composites with epoxy matrix. Wide-angle X-ray diffraction and scanning electron microscopy were used to reveal differences in the structure of the composites. In tensile tests, lyocell-fibre based ACCs showed similar strength and stiffness, yet superior extensibility compared to lyocell-epoxy composites. However, when flax fibres were used, tensile properties clearly inferior to flax-epoxy were observed. Dynamic-mechanical and thermogravimetric analysis revealed a favourable behaviour for ACC in terms of more diffuse thermal softening and increased resistance to thermal degradation.     

Bioactive glass–ceramic coated titanium implants prepared by electrophoretic deposition

Surface modification of Ti alloys towards an improved osteoinductive behaviour is one of the major challenges in orthopaedic implant technology nowadays. One way to achieve this is by applying a bioactive coating which can increase the rate of osseointegration and chemical bonding of surrounding bone to the implant. In the present work, the production of a bioactive glass–ceramic coating on flat Ti alloys by electrophoretic deposition is demonstrated. The coatings are applied by cathodic deposition from non-aqueous suspensions followed by sintering in vacuum, avoiding uncontrolled oxidation of the Ti substrates. The use of non-aqueous suspensions both allowed to reduce the deposition time and yielded homogeneous coatings with a uniform thickness of 8 μm. Evaluation of the coating adhesion confirmed the good mechanical performance of the coatings with a tensile bond strength of 41.0 ± 11.1 MPa. Additionally, a feasibility study demonstrated the potential of electrophoretic deposition as a coating technique for commercial complex implants.     

Immunomodulatory efficiency of poly(2-oxazolines)

Poly(2-oxazolines) represent promising polymer materials for biomedical applications. The activation of mouse lymphoid macrophage line P388.D1 (clone 3124) by two selected representatives of poly(2-oxazolines), namely poly(2-ethyl-2-oxazoline) (PETOX100) and poly[2-(4-aminophenyl)-2-oxazoline-co-2-ethyl-2-oxazoline] (AEOX10), was assessed in vitro. The immunomodulatory efficacy of both polymers was evaluated via the induced release of pro-inflammatory cytokines (TNF-α, IL-1α and IL-6) and the acceleration of reactive free radicals. The present study revealed effective structure-immunomodulating associations of AEOX10 and PETOX100, which are desirable in biomedical and pharmaceutical applications of aliphatic and aromatic poly (2-oxazolines) in vivo.     

Quality perception,purchase intention,and the impact of information on the evaluation of refined Pacific cupped oysters (Crassostrea gigas) by Dutch consumers

BACKGROUND

Oyster refinement using land‐based pond systems is a new activity in the Dutch oyster sector. It increases the oyster's tissue weight and changes its sensorial properties. However, the response of Dutch consumers towards refined oysters is unknown. The research aim was to gain insight into the importance of oyster quality parameters, drivers for oyster consumption, and acceptance of refined oysters by Dutch consumers, taking into account the information given to them about the product and process.

RESULTS

Taste, texture, and odor are the most important oyster quality characteristics for Dutch consumers. The outcome of questionnaires showed that willingness to buy and pay is influenced by factors such as the oysters' country of origin, cultivation area, and flavor profile. Refinement did not affect willingness to buy and pay. Furthermore Dutch consumers seem to have a preference for the flavor profile of refined oysters. Consumer evaluation showed that refined Pacific cupped oysters were perceived as sweeter compared with non‐refined oysters. When information on the cultivation process was disclosed, overall appreciation of refined oysters by consumers increased.

CONCLUSION

New insights in the importance of oyster quality characteristics for Dutch consumers are generated that can be used in the development of refined Pacific cupped oysters. © 2018 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

MULSOPS: Multivariate Optimized Pit Shells Simulator for tactical mine planning

Abstract

Production planning, scheduling and allocation of resources in large-scale surface mining operations present a great challenge to mine planning engineers. Ore and waste extraction plans must be executed to achieve tactical objectives using appropriate tools. Many production planning and scheduling and resource allocation methods are based on trial and error, crisis management or subjective judgements with no detailed economic basis or mathematical rigour. In addition, these methods do not consider the random processes governing critical development and production variables. In this study, the authors develop a multivariate pit shell simulator, MULSOPS, which addresses these problems. Rigorous geometric formulations of the ellipsoidal approximations of the pit shells geometry, their expansions and sequential interactions are modeled to mimic material displacement dynamics in an open pit operation. Stochastic and numerical modeling techniques are used to provide solutions to the time-dependent geometric models in random multivariate states Under different production and economic paradigms, the geometric models are simulated to yield the source and characteristics of appropriate cuts. Combined production from successive exposed cuts provides periodic targets for tactical planning. Variance simulation is also used to provide analysts with sensitive stochastic variables for input data definition and tight production target tolerance. A numerical example is used to illustrate the use of MULSOPS for tactical planning in a typical open pit operation.     

Measurement of intrinsic properties of amyloid fibrils by the peak force QNM method

We report the investigation of the mechanical properties of different types of amyloid fibrils by the peak force quantitative nanomechanical (PF-QNM) technique. We demonstrate that this technique correctly measures the Young's modulus independent of the polymorphic state and the cross-sectional structural details of the fibrils, and we show that values for amyloid fibrils assembled from heptapeptides, α-synuclein, Aβ(1-42), insulin, β-lactoglobulin, lysozyme, ovalbumin, Tau protein and bovine serum albumin all fall in the range of 2-4 GPa.     

Characterization of antibacterial polyethersulfone membranes using the respiration activity monitoring system (RAMOS)

Membranes with antibacterial properties were developed using surface modification of polyethersulfone ultrafiltration membranes. Three different modification strategies using polyelectrolyte layer-by-layer (LbL) technique are described. The first strategy relying on the intrinsic antibacterial properties of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(ethylenimine) (PEI) exhibits only little antibacterial effects. The other two strategies contain silver in both ionic (Ag⁺) and metallic (Ag⁰) form. Ag⁺ embedded into negatively charged poly(sodium 4-styrene sulfonate) (PSS) layers totally inhibits bacterial growth. Ag⁰ nanoparticles were introduced to the membrane surface by LbL deposition of chitosan- and poly(methacrylic acid) - sodium salt (PMA)-capped silver nanoparticles and subsequent UV or heat treatment. Antibacterial properties of the modified membranes were quantified by a new method based on the Respiration Activity Monitoring System (RAMOS), whereby the oxygen transfer rates (OTR) of E. coli K12 cultures on the membranes were monitored online. As opposed to colony forming counting method RAMOS yields more quantitative and reliable data on the antibacterial effect of membrane modification. Ag-imprinted polyelectrolyte film composed of chitosan (Ag⁰)/PMA(Ag⁰)/chitosan(Ag⁰) was found to be the most promising among the tested membranes. Further investigation revealed that the concentration and equal distribution of silver in the membrane surface plays an important role in bacterial growth inhibition.     

Evaluation of effect of paddle element stagger angle on the local velocity profiles in a twin-screw continuous mixer with viscous flow using Finite Element Method simulations

The effect of paddle element geometry, specifically a systematic change in stagger angle, on the velocity distribution of a Newtonian corn syrup was evaluated in the mixing region of a 2″ Readco continuous processor using 3D FEM simulations. Local velocities and regions of backflow were compared for three configurations of the paddle elements in the mixing region consisting of nine pairs of paddle elements with the central three being in a neutral (FLAT), staggered 45° forward (45F) or staggered 45° reverse (45R) configuration. The total material flow rate through the mixer was independent of the paddle element stagger but increased with screw speed when the mixer was operated with the barrel fully filled. The stagger angle variation caused only local disturbances in axial flow. The overall magnitudes of velocity were highest for the FLAT configuration followed by 45F and 45R. The local X and Y velocity components in the region of stagger showed no significant variation with paddle element stagger while the Z velocity component varied significantly in this region. Increased forward flow was seen for the 45F configuration while significant local backflow was seen for the 45R configuration at all positions of the paddle element rotation. The FLAT configuration had greater levels of pressure in the intermeshing region, suggesting a squeeze flow while there were not significant variations in pressure for the 45F and 45R configurations, suggesting a predominantly conveying/leakage flow in the axial direction. Variation in local flows is critical to good mixing.