Synthesis and characterization of acidic properties of Al-SBA-15 materials with varying Si/Al ratios

Al-SBA-15 of varying Si/Al ratios in the range 11.4–78.4 was synthesized using tri-block copolymer P123. The calcined materials were examined by XRD, pore size distribution, surface area, ²⁷Al NMR spectroscopy. The acidity and acid strength distribution were studied using microcalorimetric adsorption of NH₃. The acidic properties were also examined by cumene cracking reaction as a function of Si/Al ratios. Systematic variation of acidity and activity was observed as a function of Si/Al ratio. The initial heats of NH₃ adsorption correlated well with activity indicate that acid sites with ΔH > 100 kJ/mole is responsible for cumene cracking activity. Linear correlations were obtained with total acidity and cumene cracking activities. The tetrahedral aluminum was found to be responsible for the observed acidities and catalytic activities.     

Purification, kinetic characterization and involvement of tryptophan residue at the NADPH binding site of xylose reductase from Neurospora crassa

Xylose reductase (XR) from Neurospora crassa was purified to homogeneity and was found to be specific to NADPH (nicotinamide adenine dinucleotide phosphate). The purified enzyme showed M(r) of 60 and 29 kDa by gel filtration and SDS-PAGE indicating the presence of two subunits. The kinetic mechanism of xylose reductase is 'iso-ordered bi bi'. Inactivation of XR by N-bromosuccinimide (NBS) was found to be biphasic with second-order rate constants of 2.5 x 10(2) and 80 M-1S-1 for the fast (kf) and slow phase (ks), respectively. NADPH protected 90% of XR activity against inhibition by NBS. The fluorescence and circular dichroism (CD) studies revealed that inactivation was not due to gross conformational change in the enzyme. Analysis of the modified Stern-Volmer plot indicated that 49% of the tryptophanyl fluorescence was available for quenching which was completely abolished in the presence of NADPH confirming the involvement of tryptophan at the coenzyme binding site. Experimental evidence presented here serves to implicate the involvement of a tryptophan residue at the low-affinity NADPH binding site and the nature of this site has been assessed by using the hydrophobic probe ANS.     

Premature separation of centromere and aneuploidy: an indicator of high risk in unaffected individuals from familial breast cancer families?

OBJECTIVES: Injury is the leading cause of death in the male working population of Brazil. An important fraction of these deaths are work related. Very few cohort studies of steel workers, and none from developing countries, have reported on mortality from injuries. This paper analyses mortality from work and non-work related injuries among Brazilian steel workers. METHODS: Deaths during employment from 1 January 1977 to 30 November 1992 were analysed in a cohort of 21,816 male steel workers. Mortality rates specific for age and calendar year among the workers were compared with those of the male population of the state where the plant is located. Work related injuries were analysed by comparing the mortality rates for different subgroups of the cohort. RESULTS: The number of deaths (391) was less than half that expected based on death rates of the general population. Over 60% (242) of deaths were due to injuries. Mortality from most causes was substantially below that in the general population, but that from unintentional injury, was 50% above that of the general population. Standardised mortality ratios (SMRs) were highest for the youngest and the oldest employees and for labourers and clerical workers. Mortality from motor vehicle injury was twice that expected from population rates (SMR = 209, 95% confidence interval (95% CI) 176-244). There was a 67% fall in the age adjusted mortality from occupational injuries in the study period. CONCLUSION: The healthy worker effect in this cohort was greater than that commonly found in studies of occupational groups in developed countries, probably because of a greater socioeconomic gap between employed and unemployed populations in Brazil, and unequal distribution of health care resources. Mortality was especially high for motor vehicle injuries. The fall in mortality from occupational injuries during the study period was probably due to improvement in safety standards, increased automation, and better medical care. There is a need to investigate risk factors for unintentional injuries among steel workers, especially those due to motor vehicle injuries. Prevention of occupational and nonoccupational injuries should be a main priority in Brazil.     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Fertilizer use saves fuels in India

Dung supplies are inadequate to provide enough farmyard manure (FYM) and cheap dung-cakes. Use of FYM necessitates supply of other fuels for cooking. Fertilizers consume only 5% of the thermal energy embodied in FYM. Replacement of the currently used amount of FYM by fertilizers will save fuels and costs. If all of the plant nutrients are to be supplied by FYM to a hectare of wheat crop, 2.9 tonnes of coal are needed to replace the dung-cakes lost; fertilizer use will save Rs. 1444/ha. It is suggested that FYM use be minimized and fertilizer use increased for fuel thrift.     

The microbiology of sheep carcasses processed in a modern Indian abattoir

A study has been conducted on the microbiology of sheep carcasses processed in a modern abattoir. The data revealed that careful handling at the different stages of processing of sheep reduced the level of microbial contamination of carcasses. Processing steps such as evisceration and washing did not increase the microbial counts on the carcass surface. Sources of microbial contamination in the abattoir were examined. It was observed that skin, floor washings, intestinal contents and gambrels were the major sources of microbial contamination. Seasonality did not have any effect on the microbial contamination of carcasses. The study revealed that total plate counts in 86·6% of the carcasses ranged between 3·0–4·9log/cm². The counts of coliforms, staphylococci, enterococci and psychrotrophs were low. Pathogens such as Salmonella were not detected. The microbial counts were well within the generally acceptable levels. These findings demonstrated hygienic handling of carcasses. Shoulder and neck are the critical points for microbiological sampling as these sites showed higher microbial counts. Micrococcus and Staphylococcus predominated among microorganisms associated with carcasses. It was noted that differences occurred in microbial types of carcasses processed in tropical and temperate climates. The data generated in a model facility procided useful information for improving meat handling practices.     

Towards improved design of boring bars part 1: Dynamic cutting force model with continuous system analysis for the boring bar performance

The vibrational amplitude is generally large in the case of a boring bar due to its slenderness. A dynamic cutting force model has been presented to take this large amplitude into account. The boring bar is then modelled as a cantilever with this dynamic force acting at the free end and a generalized continuous system model is obtained. This model is solved for the specific case of boring with a zero side cutting edge angle for which published results are available. A reasonably close agreement is found between the proposed model and the experimental results.