Mesh data structure selection for mesh generation and FEA applications

The data structure representing a mesh and the operators to create and query such a database play a crucial role in the performance of mesh generation and FE analysis applications. The design of such a database must balance the conflicting requirements of compactness and computational efficiency. In this article, 10 different mesh representations are reviewed for linear tetrahedral and hexahedral meshes. A methodology for calculating the storage and computational costs of mesh representations is presented and the 10 data structures are analysed. Also, a system for ranking different data structures based on their computational and storage costs is devised and the various mesh representations are ranked according to this measure. Copyright © 2002 John Wiley & Sons, Ltd.     

油砂地层中子-伽玛能谱Monte-Carlo模拟

本工作应用自行研制开发的中子 伽玛能谱测井的中子 伽玛射线随空间、能量、时间分布的蒙特卡罗模拟软件包计算了裸眼井、井眼里无下井仪器、油饱和砂岩地层、井眼注油条件下沿井轴和井壁的中子 伽玛射线随能量、时间分布及沿井轴和沿井壁的中子 伽玛射线能谱 ,研究了源距对中子 伽玛射线随能量、时间分布以及井轴与井壁中子 伽玛射线能谱的影响。     

动态波前相位的高分辨率测量

动态波前相位信息测量是大气光学，气动光学和激光技术等领域的重要实验手段。提出了一种具有高的时间和空间分辨率以及长的测量持续时间的动态波前相位测量方法。应用Ｈａｒｔｍａｎｎ－Ｓｈａｃｋ波前传感器获得高空间分辨率的相位信息，采用高帧频ＣＣＤ摄象机获得高时间分辨率图象数据。     

Sidle的远程执行设备

Ｓｉｄｌｅ系统是运行在ＳＵＮ工作站网络上的一组实用程序，利用空闲的处理机资源进行大粒度的并行计算．同其它远程执行设备相比，它能支持程序内部并行和嵌套的远程执行，允许一个服务员机接受多个远程执行任务．本文介绍了这些特点和透明性的实现方法．     

Thermal post buckling behavior of rectangular antisymmetric cross-ply composite plates

Summary The thermal post buckling behavior of simply-supported, antisymmetric cross-ply plates with immovable edges is investigated in this paper. For this purpose, a one term approximation for the inplane and transverse displacements is assumed and Rayleigh-Ritz method is used to obtain the equations of equilibrium. The question, whether the true thermal buckling (bifurcation buckling under thermal loads) exists for such plates is also addressed to. The conditions under which the thermal buckling in the classical sense occurs are derived. It is shown that nonlinear bending stiffness for such plates is direction dependent, because of an extra quadratic nonlinear term in addition to the usual cubic nonlinear term in the governing equilibrium equation. Results are presented for various plate configurations.     

Triangular ray-tube analysis of dielectric lens antennas

A new method of analysis for the radiation characteristics of dielectric lens antennas with arbitrary inner and outer surfaces is presented. The analysis is based on representing the feed illumination by a contiguous set of ray tubes and including the effects of surface reflections and ray divergence. Radiation patterns and the antenna gain are then computed by evaluating the closed-form expressions developed for the Kirchhoff's integral of the aperture fields. The validity of the analysis method has been demonstrated by comparing the computations with measured results of two different spherical lenses and a shaped lens configurations. The analysis method presented takes into account some of the practical aspects associated with lens design such as surface zoning to reduce the mass and surface matching to minimize the reflection loss     

矩形件排样的一种优化算法

排样问题是一种总体资源分配问题，这里根据矩形件排样的工艺要求，提出了矩形件排样的一种近似算法，将一块板材分成三部分，每部分排一种零件，使得减料方便，提高了劳动生产率。     

Effects of various post-treatments on carbon nanotube films for reliable field emission

In this report, the FE characteristics of carbon nanotubes (CNTs) treated using both thermal annealing and mechanical coatings on the as-grown CNTs systematically studied. It was found that in the high temperature annealed samples, CNTs were attacked at its root during annealing due to a small amount of oxygen, and were pulled out of the substrate in places after FE measurements because of the contact resistance. However, for the mechanically coated samples both with spin on glass (SOG) and polymethyl methacrylate (PMMA), CNTs were found to be nearly intact after FE measurements and showed reliable FE characteristics over repeatable voltage scan. The reliability of CNTs during FE could be owing to the strong adhesion of CNTs to the substrate both by SOG and PMMA coatings.