柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Signaling and Control Procedures Using Generalized MPLS Protocol for IP over an Optical Network

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP‐centric signaling and control architecture based on the generalized multi‐protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross‐connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS‐based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user‐network interface and network‐network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to GMPLS signaling.     

Profit Aware Circuit Design Under Process Variations Considering Speed Binning

In this paper, a profit-aware design metric is proposed to consider the overall merit of a design in terms of power and performance. A statistical design methodology is then developed to improve the economic merit of a design considering frequency binning and product price profile. A low-complexity sensitivity-based gate sizing algorithm is developed to improve economic gain of a design over its initial yield-optimized design. Finally, we present an integrated design methodology for simultaneous sizing and bin boundary determination to enhance profit under an area constraint. Experiments on a set of ISCAS'85 benchmarks show in average 19% improvement in profit for simultaneous sizing and bin boundary determination, considering both leakage power dissipation and delay bounds compared to a design initially optimized for 90% yield at iso-area in 70-nm bulk CMOS technology.     

Design of an Internal Antenna with Near‐Omnidirectional H‐Plane Radiation Pattern over Ultra‐wide Bandwidth

In this paper, an ultra‐wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi‐arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm × 10 mm × 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.     

Simulated fault injection: a methodology to evaluate fault tolerantmicroprocessor architectures

A simulation-based fault-injection methodology for validating fault-tolerant microprocessor architectures is described. The approach uses mixed-mode simulation (electrical/logic analysis), and injects transient errors in run-time to assess the resulting fault-impact. To exemplify the methodology, a fault-tolerant architecture which models the digital aspects of a dual-channel, real-time jet-engine controller is used. The level of effectiveness of the dual configuration with respect to single and multiple transients is measured. The results indicate 100% coverage of single transients. Approximately 12% of the multiple transients affect both channels; none result in controller failure since two additional levels of redundancy exist     

Measured average cell rate‐based congestion avoidance scheme

Techniques for congestion control of available bit‐rate (ABR) traffic in ATM (asynchronous transfer mode) networks remain an important issue. Several congestion control schemes have been proposed to adjust the cell rates of sources with a modified or mean allowed cell rate. To make these schemes work effectively in practice, the modified or mean allowed cell rate must converge under all conditions. However, it is not easy to obtain an accurate value, and an inaccurate value could result in network performance degradation such as severe oscillations and considerable unfairness. Therefore, we propose a measured average cell rate‐based congestion avoidance for ABR traffic in ATM networks. The scheme has high throughput and achieves shorter queue lengths without congestion. With measured average cell rate, the scheme provides fast convergence to a start‐up virtual connection (VC) and rate of equalization from different initial conditions of the sources. Thus, this scheme provides better fairness among connections. Copyright © 2001 John Wiley & Sons, Ltd.     

Transforming One‐Dimensional Nanowalls to Long‐Range Ordered Two‐Dimensional Nanowaves: Exploiting Buckling Instability and Nanofibers Effect in Holographic Lithography

Two‐dimensional nanowaves with long‐range order are fabricated by exploiting swelling‐induced buckling of one‐dimensional (1D) nanowalls with nanofibers formed in‐between during holographic lithography of the negative‐tone photoresist SU‐8. The 1D film goes through a constrained swelling in the development stage, and becomes buckled above the critical threshold. The degree of lateral undulation can be controlled by tuning the pattern aspect ratio (height/width) and exposure dosage. At a high aspect ratio (e.g., 6) and a high exposure dosage, nanofibers (30–50 nm in diameter) are formed between the nanowalls as a result of overlapping of low crosslinking density regions. By comparing experimental results with finite‐element analysis, the buckling mechanism is investigated, which confirms that the nanofibers prevent the deformed nanowalls from recovery to their original state, thus, leading to long‐range ordered two‐dimensional (2D) wavy structures. The film with nanowaves show weaker reflecting color under an ambient light and lower transmittance compared to the straight nanowalls. Using double exposure through a photomask, patterns consisting of both nanowaves and nanowalls for optical display are created.     

Variable length signal detection framework for cognitive radio systems

The cognitive radio (CR) system opportunistically utilizes the frequency bands temporally unoccupied by the primary user. In the CR system, the energy or cyclostationary detector is used to detect the primary user signal. For protecting the primary user tightly, the signal detection time can be very long, which leads to inefficiency in the CR system. Thus, we propose a novel signal detector that greatly reduces the average detection time. The proposed detector periodically decides whether it terminates the detection process or receives more input signal for more information. Therefore, the proposed detector has variable detection time. We will call the proposed detector the variable length signal detector (VLSD). The VLSD is designed by using a partially observable Markov decision process framework for optimal performance. We present the numerical results showing that the VLSD requires much smaller average detection time compared with the traditional fixed length signal detector to achieve a given detection error probability. Copyright © 2012 John Wiley & Sons, Ltd.     

A moving-actuator type electromechanical total artificial heart.II. Circular type and animal experiment

A new type of electromechanical total artificial heart (TAH) based on circular rolling-cylinder mechanism was developed to overcome critical problems in motor-driven artificial hearts such as large size and difficulties in fitting the heart to atrial remnants and arterial vessels. Its performance and reliability were evaluated in mock circulation and in an animal implant experiment. The total weight and volume of the pump is 650 g and 600 mL, respectively. This new pump was implanted in a calf for total heart replacement and 96 h of survival was achieved. The whole system, including pump, controller, and control algorithm performed well enough to improve the prospect of eventual clinical application of our TAH system.     

Understanding social viewing through discussion network and emotion: A focus on South Korean presidential debates

With the development of social media, television viewing is perceived no longer as an isolated activity. This study explores the underlying mechanism of the effects of social viewing discussion networks (i.e., bridging and bonding social viewing networks) on emotions (i.e., anger, fear, and enthusiasm), and moreover on opinion consolidation as well as opinion weakening in the context of the 2017 South Korean presidential debates. Overall, the main results are: a) Social viewing discussion networks influenced emotional states of social viewers, b) Emotions influenced attitude formation during social viewing, and c) Enthusiasm served as a catalyst that links bonding and bridging social viewing, and opinion consolidation. Implications and theoretical contributions are discussed.