Dynamics of photosynthetic pigments in an Andean lake in Colombia

Guatavita Lake is a small, sheltered tropical high mountain lake located in the Colombian Andes, with a closed watershed and a maximum depth of 25 m. It is the freshwater source for human consumption in nearby small towns, as well as being a site of cultural value for the country, as it was a sacred place to indigenous peoples until about five centuries ago. As the structure and function of this aquatic ecosystem is poorly understood, this study provides initial knowledge on its phytoplankton biomass dynamics, which should be useful in designing efficient management plans with environmental baseline information for similar lakes elsewhere. Physical and chemical data, and photosynthetic pigment concentrations, were measured for the period November 1999–November 2000 at the central vertical axis of Guatavita Lake. The vertical profile of the chlorophyll‐a concentration was closely related to the dissolved inorganic nitrogen concentrations and the thermal stratification characteristics. The maximum chlorophyll‐a concentration in the metalimnion was recorded for the thermal stratification period (November 1999–June 2000). Deepening of the maximum chlorophyll‐a concentration began in February, continuing to June, when it reached its lowest value at the 15 m depth. The phytoplankton biomass values showed an increment within the entire water column at the beginning of the mixing period (July). The relation between the metalimnetic peak of chlorophyll‐a and the dissolved inorganic nitrogen concentration suggests the growth of the phytoplankton community is limited mainly by the availability of nitrogen.     

Real-Time Three-Dimensional Occupancy Grid Modeling for the Detection and Tracking of Construction Resources

Awareness of the construction environment can be improved by automatic three-dimensional (3D) sensing and modeling of job sites in real time. Commercially available 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model dynamic objects in real time in an environment comprised of moving humans, equipment, and materials. Emerging prototype video range cameras offer an alternative by facilitating affordable, wide field of view, dynamic object tracking at frame rates better than 1?Hz (real time). This paper describes a methodology to model, detect, and track the position of static and moving objects in real time, based on data obtained from video range cameras. Experiments with this technology have produced results that indicate that video rate 3D data acquisition and analysis of construction environments can support effective modeling, detection, and tracking of project resources. This approach to job site awareness has inherent value and broad application. In combination with effective management practices and other sensing techniques, this technology has the potential to significantly improve safety on construction job sites.     

Uncertainty analysis based on sensitivity applied to angle-ply composite structures

This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.     

Burner Performance Evaluation Using Test Code

Development of new burner technology is common practice nowadays. Standardized test codes are available to conduct tests to determine operating characteristics and thermal performance of different parts of steam generating units. This paper describes the results of testing performed to evaluate thermal efficiency of a 74.5?kW fire-tube steam generator fired with a new premixed flame burner in comparison to a typical standard-retrofit diffusion flame burner system. Two premixed flame burners sized at 7.6 and 10.1?cm were tested. Testing was performed in accordance with the ASME PTC 4.1 Power Test Code. The evaluation was conducted in the range of small- to mid-sized, natural gas-fired applications, from 1.06?to?2.64×106?kJ/h. The environmental nitrogen oxide (NOx) emissions performance was also compared for both burner technologies. The results of this evaluation indicate that firing the test boiler with the 7.6?cm new burner slightly improves unit thermal efficiency by 4.0–3.3% for a unit load ranging from approximately 1.06?to?1.79×106?kJ/h, respectively. Operation with the 10.1?cm new burner improves the thermal efficiency by approximately 1.6% at 2.32×106?kJ/h. The uncertainty in the measurements used in the efficiency calculations should account for approximately ±1.5% uncertainty in the reported gross efficiency. Reductions in NOx emissions of the order of 10% resulted from operation with the new premixed flame burners.     

Case Study-Based Challenges of Quality Concrete Finishing for Architecturally Complex Structures

This paper focuses on the procedure utilized in the construction of tilt-up irregular concrete panels that are constructed on-site using concrete slabs and wooden formwork. The case study required high-quality concrete finishing. The erection and installation procedure called for a maximum panel-to-panel joint tolerance of 1.27?cm (0.5?in.), often 90° joints between panels. To meet precision requirements, the casting slabs were leveled and flattened with laser screed technology and smoothed with chemical solutions. To ensure that the final result met expectations, a mock-up model was built using different types of materials and to simulate site constraints. The architectural design is a composition of precast concrete panels like “Lego” pieces assembled similarly to a jigsaw puzzle. The unique construction process required a state-of-the-art analysis to produce the set quality. Quality conditions as set by the owner included creating a smooth concrete surface on all panels while avoiding damages and reducing equipment and material costs. The proposed methodology is described through its implementation on the case study, which is also described in this paper.     

Fullerene Reactivity in an Oxygen Plasma

Fullerene reactivity in an oxygen plasma was measured and compared with those determined under the same conditions for a comprehensive set of 50 carbon materials. The possible reasons for the high plasma reactivity of the fullerene sample in an oxygen plasma are discussed.     

Developing maintainable expert systems using case-based reasoning

Abstract: Maintainability problems associated with traditional software systems are exacerbated in rule-based systems. The very nature of that approach — separation of control knowledge and data-driven execution — hampers maintenance. While there are widely accepted techniques for maintaining conventional software, the same is not true for rule-based systems. In most situations, both a knowledge engineer and a domain expert are necessary to update the rules of a rule-based system. This paper presents, first, an overview of the software engineering techniques and object-oriented methods used in maintaining rule-based systems. It then discusses alternate paradigms for expert system development. The benefits of using case-based reasoning (from the maintenance point of view) are illustrated through the implementation of a case-based scheduler. The main value of the scheduler is that its knowledge base can be modified by the expert without the assistance of a knowledge engineer. Since changes in application requirements can be given directly to the system by the expert, the effort of maintaining the knowledge base is greatly reduced.     

Disassembly sequence planning in a disassembly cell context

In this paper a two-phase approach is proposed for determining the optimal disassembly sequence when the disassembly system has a cellular configuration. Operations are first grouped into cells based on the resources they require with the goal of minimizing machine acquisition costs. The aim is to group together those operations that use similar equipment in order to achieve good utilization levels of such equipment. A maximum cell size may be imposed. Once the cells have been formed and the operations have been assigned to them, a metaheuristic algorithm (namely GRASP) is used to search for the disassembly sequence for each product that leads to the minimum number of intercellular movements. To account for uncertainty regarding the condition in which the product may arrive, each disassembly task is assumed to be required with a certain probability, regardless of the other tasks. AND/OR precedence relations among the disassembly tasks are also considered. The proposed approach is illustrated on a randomly generated disassembly problem.