Tunnelling projects in Southern Africa

Until some thirty years ago tunnelling in southern Africa for civil engineering purposes had been on a relatively small scale and of a sporadic nature. The first major tunnel to be built in the region was the 82 km long Orange-Fish Tunnel. Since 1970 more than 175 tunnels with an aggregate length of just over 400 km have been built. Much of the first phase of the Lesotho Highlands Water Project, which will have more than 100 km of tunnels, is about to be completed. The last thirty years represent the busiest period of tunnelling by civil engineers that southern Africa has ever known. The paper starts by summarising the early history of tunnelling in the region, and goes onto describe recent and current tunnelling projects. It also gives an indication of the possible demand for tunnels in the future.     

Aggregate and concrete microfracture

Thin sections cut from cast concrete cylinders have been examined in transmitted light to investigate the significance of coarse aggregate type in “primary” microfracturing. Concretes manufactured with crushed-rock aggregates and gravel aggregates were studied and, in every case, the dominant fracture type was a parting of the aggregate-matrix bond. Bond cracking was least severe with the marble aggregate where epitaxial calcite over-growth was indicated. The ability of bond cracks to maintain continuity by bridging surface irregularities, via mortar cracks, reduced the inhibiting influence of rough-surfaced aggregate on bond-crack development.     

Cigarette characteristics,smoker characteristics,and the relationship to cigarette fires

Data were collected from eight cities on a wide range of cigarette and smoker characteristics for a sample of smokers. Of these, 564 smokers had had fires and were identified through fire department response to those fires, while the other 1,611 smokers had not had fires and were identified through a telephone sample survey of the communities. The characteristics analyzed included those that had shown evidence of a relationship to the risk of a cigarette-initiated fire, either in laboratory studies or in previous statistical analyses of fire experience.The smoker characteristics analyzed were household income, education, age, gender, and race. The cigarette characteristics analyzed were filter, tobacco column length, filter length, circumference, density, amount of tobacco, menthol, citrate, porosity, and pack type. In addition, a variable was used to control for the smoker's city.After controlling for all smoker characteristics and city, logistic regression modeling showed four cigarette characteristics to be significant: filter, filter length, porosity, and type of pack. Filter, filter length, and porosity all affect air intake, which, therefore, appears to be an important physical element in the combustion process associated with risk. Analysis limited to filtered cigarettes only showed the same characteristics to be significant, plus tobacco column length. Extension of the analysis to two-way interaction terms did not change any of the conclusions on which cigarette characteristics are important, but it did indicate that the role of pack type was different for men and women.Sensitivity analyses, shown in the appendix, supported the main conclusions that cigarette characteristics are significant after controlling for smoker characteristics and that the four specific cigarette characteristics—filter, filter length, porosity, and pack—are the ones that are significant. These analyses checked the impact of cluster sampling, sensitivity to missing data on smoker characteristics, and sensitivity to nonfire smoker cases with responses by people other than the smokers themselves.All this means that there are already cigarettes commercially available that exhibit a reduced propensity for ignition when one controls for smoker characteristics.This report was originally written as the final report in June 1993 as part of CPSC-P-91-1147 Contract Cigarette Fire Incident Study that the National Fire Protection Association conducted for the U.S. Consumer Product Safety Commission.Harwood, formerly with the Consumer Product Safety Commission, is retired.     

Paleonutritional analysis of the pre-Hispanic population from Fuerteventura (Canary Islands)

In this study, from histological and chemical perspectives, we analyse the human remains belonging to the pre-Hispanic inhabitants from Fuerteventura (one of the Canary Islands) and compare the results with those obtained on a sample of pre-Hispanic inhabitants from Gran Canaria (Canary Islands). We observe that trabecular bone mass was normal in the samples from Fuerteventura except for an elderly woman; this result is in sharp contrast with the decreased bone mass observed in the population from Gran Canaria. The pre-Hispanic population from Fuerteventura showed lower bone strontium, Sr/Ca ratio, and bone barium, but slightly higher bone copper, than that from Gran Canaria. All these data indicate a greater consumption of marine products by the population of Fuerteventura. The high prevalence of osteoporosis observed in the population from Gran Canaria may be interpreted as a consequence of protein-calorie malnutrition, a condition which seemed to be not so prevalent in the population of Fuerteventura.     

Interstitial inorganic phosphorus concentrations in lakes Mendota and Wingra

Interstitial P levels in Lake Mendota and Lake Wingra were evaluated as a function of season and water column and sediment depth. Interstitial water was obtained by the centrifugation-filtration method. Temporal variations were observed over the entire 15 cm sediment depth interval examined in all four locations evaluated. Interstitial reactive P (IRP) levels in Lake Mendota ranged from 0.014–1.67 mg l⁻¹ at the 5–6 m water column depth and from 1.20–5.75 mg l⁻¹ at the 18–19.5 m depth. IRP levels in Lake Wingra ranged from 0.029–2.15 mg l⁻¹ at 3.5 m and from 0.191–3.96 mg l⁻¹ at 2 m. Variations in interstitial P were attributed to variations in oxidation state of Fe as influenced by oxygen transport and reduction rates.     

Noise impact caused by electrical energy substations in the city of Curitiba, Brazil

This survey is intended to characterize the noise impact due to electrical energy substations in the city of Curitiba over the population living in their vicinity. This impact has been studied with the aid of a computational tool capable of mapping the acoustical field of substations and their vicinity. Several factors have been considered in this survey: (1) sound power of the transformers; (2) vehicle flow on the surrounding roads; (3) positioning of the firewalls, buildings and walls; and (4) terrain topography. Four substations have been analyzed, and an acoustical map has been traced for each of them. With these maps it was possible to visualize what was the incident noise level on the building facades. The predicted noise levels have been compared to the environmental legislation of the noise emissions in effect in the city.     

Precision of in-place concrete strenghts predicted using core strength correction factors obtained by weighted regression analysis

A two-step method for converting a concrete core compression test result to the in-place strength of the corresponding volume of concrete is presented. The strength of a non-standard core is first converted to the equivalent strength of a standard core, and then the standard core strength is converted to the equivalent in-place strength. Strength correction factors required for these conversions, obtained from weighted linear and nonlinear regression analyses presented elsewhere, are summarized. The accuracy of the predicted in-place strength is affected by the inherent error of the core strength measurement itself, and by the uncertainty of the various strength correction factors. It is shown that confidence intervals on the estimates of the strength correction factors obtained by regression analysis underestimate the true model error because the underlying models are imperfect. Instead, the accuracy of the strength correction factors is determined by a weighted regression analysis of ratios of observed-to-predicted values which accounts for the non-uniform variances of the dependent and independent variables. The coefficient of variation of the in-place strength predicted from a test of a 100 or 150 mm diameter core is between 4 and 5.5.%. If the in-place strength is predicted from a test of a 50 mm diameter core, the coefficient of variation of the predicted in-place strength is approximately 12.5%. These error estimates do not account for possible variation of in-place strength throughout the volume of the element being cored.     

Radionuclide contamination of foods imported into Iraq following the Chernobyl nuclear reactor accident

Since early 1986, a monitoring program for radionuclides in imported foods has been carried out by the Iraqi Atomic Energy Commission. After the Chernobyl nuclear reactor accident in the Soviet Union, the program was expanded; our laboratory was officially designated by the Iraqi Government to measure radionuclide activity concentrations in foodstuff imported from countries known to be severely contaminated by Chernobyl radioactive fallout. Gamma-spectrometric analysis was used. Food items such as powdered milk, lamb meat, poultry, cereals and grains imported into Iraq before the Chernobyl accident did not contain any detectable fission products. However, all lamb meat, 81% of the lentil, 44% of the powdered milk and chick-pea, and 17% of the roast beef samples were contaminated with 137Cs or 134Cs and 137Cs. The highest 137Cs contamination levels found were 82, 147, 420, 6 and 4 Bq kg-1, respectively. Contamination by 134Cs was approximately 50% of the values given above.     

Homogeneous iron-catalyzed photochemical degradation of muconic acid in water

Iron photochemical oxidation has been used to remove muconic acid from water. Two different light systems were used: black lamps and solar irradiation. The effect of iron concentration, intensity of incident radiation, pH and presence of oxalic acid was investigated. The first two variables yield positive effects on the removal rate of muconic acid while higher efficiency was achieved at pH 3. Oxalic acid enhances the oxidation rate because of the formation of photoactive ferrioxalate ion. Stoichiometric results indicated formation of two hydroxyl radicals to degrade 1 mol of muconic acid. At similar experimental conditions, initial oxidation rates of muconic acid were higher when solar light was used to irradiate the aqueous solutions, although in this case, the oxidation process is stopped because of the consumption of photoactive species.     

Chemical and physical characteristics of a eutrophic reservoir and its tributaries: Long Lake, Washington

Surveillance on the Spokane River and its tributaries has shown that a major source of nutrients influencing the eutrophication of Long Lake was the effluent of the Spokane primary sewage treatment plant. Existing concentrations of nitrate nitrogen and orthophosphate increased threefold and tenfold, respectively, below the effluent. Of the influent phosphate phosphorus, 19 per cent was retained in the reservoir.A density current system was evident in Long Lake which altered vertical and longitudinal distribution of physical and chemical parameters. This current isolated a wedge of water on the reservoir bottom which became anaerobic. During the period of anaerobiosis, phosphate phosphorus and nitrogen maxima were present in the hypolimnion.