提高特高含水期油藏采收率的方法及应用效果

针对胜索油田二区9-10单元的层间非均质和平面非均质性，运用水动力学方法，采用周期注水及增压注水改善单元的水驱油效果。经过6a的实施，单元的开发形势趋好，单元采收率提高9.62%，增加可采储量341.5kt，对同类型非均质性油藏改善水驱油效果，提高最终采收率具有借鉴意义。     

宽带接入服务器的选择配置和应用

本文主要分析了影响宽带接入服务器性能的各种因素，介绍了如何选择宽带接入服务器，并针对REDBACK公司的SMS1800和UNISPHERE公司的ERX1400两种典型宽带接入服务器说明如何进行配置，为应用宽带接入服务器提供参考。     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

再造鼓形膨胀器

介绍了本钢不停产安装再造煤气管道鼓形膨胀器的实践，并对制造、安装方法进行了叙述，特别是在结构上采用了独特的构槽密封焊缝和完整的安装程序，保证了实施的安全。     

Integrating scheduling and control functions in computer integrated manufacturing using artificial intelligence

Proper integration of scheduling and control in Flexible Manufacturing Systems will make available the required level of decision-making capacity to provide a flexibly-automated, efficient, and quality manufacturing process. To achieve this level of integration, the developments in computer technology and sophisticated techniques of artificial intelligence (AI) should be applied to such FMS functions as scheduling. In this paper, we present an Intelligent Scheduling System for FMS under development that makes use of the integration of two AI technologies. These two AI technologies — Neural Networks and Expert Systems — provide the intelligence that the scheduling function requires in order to generate goodschedules within the restrictions imposed by real-time problems. Because the system has the ability to plan ahead and learn, it has a higher probability of success than conventional approaches. The adaptive behavior that will be achieved contribute to the integration of scheduling and control in FMS.     

Urban growth and manufacturing change in the United States-Mexico borderlands: A conceptual framework and an empirical analysis

This article is a contribution to the study of urban and manufacturing evolution that develops and applies the author's concept of the urban-manufacturing life cycle. This concept relates internal characteristics and external impacts of the urban manufacturing base to the process of urban growth by considering the most significant variables and their changes over time. Emphasis is also placed on process-oriented evolution and general relevance rather than outcomes. An application to the general study of border cities with distinct levels of development follows a review of the urban and regional growth literature, as an initial contribution to the development of an evolutionary theory of borders. Empirical analyses with longitudinal data for five major United States and Mexican border urban clusters then evaluate the general assumptions of the concept. Growth trends in urban population, sectoral employment shares, urban industrial structure, employment, and number of manufacturing plants are examined in each of the cities and urban clusters considered. The study concludes that the empirical analyses generally verify the assumptions of the urban-manufacturing life cycle.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

β-hydroxyacyl-coa-dehydrogenase (HADH) activity of unfrozen and frozen—thawed frog (Rana esculenta) legs

The β-hydroxyacyl-CoA-dehydrogenase (HADH) activity of unfrozen and thawed frog legs was investigated. The enzyme was extracted by either immersing frog legs in phosphate buffer 0.1 M, pH 6.0 at 25°C for 15 min or pressing them between trichinoscopy glasses. The enzyme activity was assayed using acetoacetyl-CoA as substrate and measured spectrophotometrically at 340 nm. It was possible by both extraction methods to distinguish between thawed and unfrozen samples although when the juice was obtained by pressing the HADH activity of the dilution was ～ 1.5 times higher than that obtained by immersion. The HADH activity was significantly higher (P≤0·001) in frozen-thawed frogs than in unfrozen legs because during freezing there is a release of HADH. No significative differences were found in the HADH activity in samples frozen in the temperature range -10 to -196°C. HADH activity was not affected by the storage time in crushed ice up to 6 days.